tv repair shop software
 

Software for repair shop
Assist Control


Free trial

 tv repair

 TV repair forum - Open   
See our courses below


 		        
  << Previous Topic | Next Topic >>Back to main  

RCA F32450 ATC113 BOARD

February 19 2007 at 8:00 PM
No score for this post		   (Login Steve241)
My RF connector (cable in) broke off during a move. The connector is soldered to the ATC113 circuit board. I tried to locate a replacement connector online with no luck. Does anyone know if that is a serviceable part, or do I need to swap out the entire main board?

Steve

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply
steve
(no login)

RF

Score 5.0 (1 person)		February 20 2007, 3:51 AM 

YES YOU CAN BUY THEM FROM HBF ELECTRONICS THEY ARE A RCA DISTRIBUTOR BUT YOU WILL HAVE TO SOLDER IT IN.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Frank
(no login)

Re: RCA F32450 ATC113 BOARD

Score 5.0 (1 person)		February 20 2007, 4:09 PM 

You can get any rf connector from any set and adapt it to that set, i've done that many times,all you need is a hight wattage solder tool,

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Steve
(Login Steve241)

Thanks

No score for this post		February 20 2007, 8:20 PM 

Great, thanks a ton guys.

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - RCA F32450 ATC113 BOARD
  << Previous Topic | Next Topic >>Back to main