I have a mitsubishi vs-466r big screen that is displaying everything in double and the color is off. any help will be appreciated.

the convergeance is off. proably needs a STK or STK's replaced

what is a stk? dont know much about this stuff

it is an electronic device that aligns all the colors

where do I locate this in my set?

it or they are usually located on a seperate board, it has a large aluminum finned heat sink also. usually they are black in color, about 3 inches long, 2 inchs tall, & 3/4 inchs thick. they have alot of pins on bottom that are soldered to the board. you could also have a bad fuse on the board. those fuses don't look like a normal glass fuse's either. you could have a bad resistor, or maybye lost power to board. their are alot of things that need checked. most times it is the STK's. good luck

it or they are usually located on a seperate board, it has a large aluminum finned heat sink also. usually they are black in color, about 3 inches long, 2 inchs tall, & 3/4 inchs thick. they have alot of pins on bottom that are soldered to the board. you could also have a bad fuse on the board. those fuses don't look like a normal glass fuse's either. you could have a bad resistor, or maybye lost power to board. their are alot of things that need checked. most times it is the STK's. good luck