tv repair shop software
 

Software for repair shop
Assist Control



Free trial

tv repair

 TV repair forum - Open   
See our courses below


 
       
  << Previous Topic | Next Topic >>Back to main  

25" Sansui tv model:TVM2502

July 22 2007 at 12:23 PM
No score for this post
Sidney® ™  (no login)

25" Sansui tv model:TVM2502,year:April 1997,UL Listed:289X (Orion),CSA File No:LR105909.Orion CRT,Zenith yoke.
Customer states picture is snowy but on my bench no problem yet (I only ran tv for 5 minutes),I visually checked for cracked solder but so far all soldering is fine.
Anyone have any common repair tips for this Orion junk tv?,thanks.

Sidney
Dartmouth,Nova Scotia
Canada

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
AuthorReply
Frank
(no login)

Re: 25" Sansui tv model:TVM2502

No score for this post
July 22 2007, 6:02 PM 

It could be tuner grounds,in your bench you might have a strong signal, but at the customers residence might be alot of spliters or a bad cable connection that cause weaker signal than tuner gets grainy,tell him to get a antena/cable amp if you can't find the leaky component,not a easy job, good luck

 
Scoring disabled. You must be logged in to score posts.Respond to this message   

(Login ron3800)

Re: 25" Sansui tv model:TVM2502

No score for this post
July 31 2007, 5:23 PM 

Hi Sidney any luck on the Sansui?

 
Scoring disabled. You must be logged in to score posts.Respond to this message   
Current Topic - 25" Sansui tv model:TVM2502
  << Previous Topic | Next Topic >>Back to main