Hi everyone. I have quite a few misc parts from Daisy bb guns that I may sell if someone is looking for something in particular. I would list on the auctions site, but couldn't list all the parts out and may not want to sell some of the parts I have. I have a number of levers, shot tubes (but don't want to sell the 25s Sorry) Plungers, Barrels (Including a number of 25s). 25 receivers (new Style). Screws, Stocks for some misc also including a number of 25s. There are some cast iron levers and older shot tubes if I can match them. I would just try and price things as needed and see what you think. any questions, please ask. Thanks, Rusty

Dear Sir: Am in search for a barrel that goes into a #111 Model 40 Red Ryder BB Gun. It's the one that screws down inside with the lip to hold the bb's in the tube. If you have, please replay. Thank you... Dixie [email protected]

looking for daisy model 94 with false hammer, checkering,butt plate. in good condition. e-mail me at [email protected] thank you. ron

do you have a shot tube for a 141 defender?

Hello.
I'm looking for a shot tube for a Daisy model B 500 shot or 1000 shot, also a shot tube for a Daisy model 27 1000 shot.

Please let me know.

Thanks, Dan.

I need a plastic stock for a Daisy BB gun, model 1894. Thank you.

looking for shot retaining spring has a part number 218 it sits at the bottom of the shot tube

I am in need of a shot tube/barrel for a 1965 Daisy Model 25.
If you would like to sell one please e-mail me with a price.

Bob Schlund
SE Michigan

Springers are Neat! One Shot One Bullseye!

I need a handgrip.left one only for a Daisy pistol, the 45 calibur. No model # on the pistol. Thanks

I need a shot tube and front sight for a Daisy model 26. I also need two shot tubes for Daisy single shot model C's

i need a shot tube for a mod 107 and a targeteer

Do you still have parts for daisy BB guns?

Do you have any non force feed shot tubes, kinda like the ones used on the "regular 300 round" BB guns, but nearly 12" long?

Thanks
Mike Carambat

Hi, Do you have any King Rifle parts?

Rusty,

I want to put a gravity feed tube in one of my model 25's.

If you have a gravity feed tube that is the same length as a model 25 feed tube (outside end to outside end) I would be interested in it. I have no idea what Daisy gun might have a gravity feed tube the correct lenth, except maybe the model 225.

I have one that is just a little too short (unknown model source). I have decided to saw off the cap end and make a bushing for it. The barrel end of the shot tube would be recessed about 1/2" from the end of the barrel shroud and the bushing will extend out of the barrel shroud about 1/2" so it can be gripped for turning.

I figure I can turn the 2" long bushing outta hardwood on a po' boy lathe (electric drill) and secure it to the shot tube with Gorilla Glue and paint / stain it black. I'll drill a bb fill hole in the barrel shroud on the underside seam where it will be less conspicuous.

A model 25 shot tube cost about $50. I can do this for nut'n and turn a parts gun into a shooter.

If ya' got one the right length that is inexpensive, then I ain't gotta do nut'n but screw it in and then go out and shoot about 300 BB's between reloads.

Either way, I'll probably still mess around with the bushing thing because it izza kinda cool project.

Thanks
Mike Carambat

Mike,

Could you just cut enough off the barrel housing to accomodate the lenght of the shot tube you have? sounds as though it might be a bit easier.

rock64

need lever for red rider bb gun model 1938b

need lever for red rider bb gun model 1938b

I am looking for feed tube that screws into front of the barrel that you load the bbs into.Its off of aDaisy model NO. 25 Daisy Mfg. CO. DO you have one for sale or know of someone who does? Any help would be appreciated. Thanks Tim

I am looking for feed tube that screws into front of the barrel that you load the bbs into.Its off of aDaisy model NO. 25 Daisy Mfg. CO. DO you have one for sale or know of someone who does? Any help would be appreciated. Thanks Tim

I am looking for feed tube that screws into front of the barrel that you load the bbs into.Its off of aDaisy model NO. 25 Daisy Mfg. CO. DO you have one for sale or know of someone who does? Any help would be appreciated. Thanks Tim

hi rusty, would like to know if you have any cross hairs for a daisy made scope, not the long 300 model but the shorter one. i was messing around out side ajusting mine(which the little handels are broke off) and loe and behold one fell out hit my fore arm and then the ground. can you believe i've looked over and over for over 2 hrs. and cannot find it, soooooo i'm wondering if you have one? i've talked to dwayne but he wasn't sure if he had one or not and hasn't gotten back to me yet. please let me know one way or the other or call me at 509-327-9138, i'm in spokane wash.
thanks, will

Do you have any parts for the Daisy NRA Centennial pistol or rifle? Thanks.

Do you have any parts for the Daisy NRA Centennial pistol or rifle? Thanks.

Do you have any parts for the Daisy NRA Centennial pistol or rifle? Thanks.

need plunger head assembly and a shot tube for a red ryder 111-40

Need red ryder 94 forearm with band and rear sight

I am looking for a shot tube for a daisy mod 90
Thanks Randall

Hello Rusty, I could use some parts for Plymouth Red RYders & Golden Eagles shot tube screws sights etc ...

Hi Rusty,
Would you have a lever for Daisy 1938B? Possibly a metal part instead of the cheap plastic one they use these days? Would you be able to also send me a lever replacement instructions?
Regards,
Mladen Ruzic

Looking for a front band for a model 40 defender. I am also looking for a reproduction bayonet for the model 40 defender.

im looking for a shot tube for a daisy 118 pistol

I need: 25TS trigger spring, 25SR back sight, #25SA screw assortment. Can you help me? Thanks curt

I need a 25TS spring and 25SA screws. Tony

i need a shot tube for a 118 targeteer

Rusty I need a 5 groove barrel with shot tube

Rusty I need a 5 groove barrel with shot tube

Would you happaen to have a sight elevation piece for a 1894 model and a fore arm for a model 75 Scout?
Thanks Ken

how much for the plunger

Hi Ken, I do have your elevator and your forearm, but couldn't respond to you email. Please email me at [email protected]

I have a shot tube for a targeteer if someone needs one. [email protected]

have you any trigger group springs for a model 25 and if so, how much. If not, any suggestions where I might find?

thanks

bill

I am looking for a shot tube for a daisy model 118 targeteer. Would you have this and would you be willing to sell it? Thanks John

I am looking for a shot tube for daisy model 118 targeteer. If you have one for sale please let me know.

Targeteer shot tube for sale for $25.00

I swopped Dennis Baker at [email protected] a Daisy Targeteer for another item about a few weeks ago and if you email him you might be able to acquire what you need.

Rusty- Do you have the two pieces that screw to the inside of the slide to cock the pistol and the two screws ?

Thanks very much
Rick

I have several for sale if interested:
[email protected]

Thanks

Chris/45Warrior

I just took in 6 older air rifles and 1 pistol on a trade. The pistol is a Daisy CO2 200 model. I need the screw piece that is on the bottom of the grip. I assume that this screw piece is what punctures the C02 cartridge. Any help would be great. You can e-mail or call 239-848-5293(cell) or 239-543-9919(home). I am an FFL gun dealer, but I don't know much about old air guns. Thanks! Rob Lewis

Do you have any parts for the Daisy Model 2003?

Thanks
Rick

I have a Daisy No. 300 telescope sight and need the mounting brackets for the front and the rear of the scope. Can you help me?
Thanks,
Fred

Rusty,
I am looking for the left barrel insert for a model 21 shotgun. Please let me know if you have such a part.
Thanks for your time in reading this post.
Bob Carleson

I need the part with the leather(on the plunger I think, not familiar with the part names. This part has a narrow tube set in lead that is activated by a long
spring I think has a leather washer attached. Can you help me locate such item.

I need the part with the leather(on the plunger I think, not familiar with the part names. This part has a narrow tube set in lead that is activated by a long
spring I think has a leather washer attached. Can you help me locate such item.

Sir I need the trigger spring that fits the daisy model 25 bb gun.. do you have or know where I can purchase them Thx Pete

I am looking for the "loose" part of the rear sight (the part that might come loose and get lost).

Trying to testore a 12-24, Plymouth. Need a wood stock ( shoulder).Any ideas?? Thanks

Would like a wood stock that fits the LIMITED EDITION 94. The stock for one is cut different at the wrist than the later wood stock 94s. Thought since the LE 94 has an octagon barrel and is very well made...would be even better with wood stock !

Dear Rusty,
I need a rear sight for my 53 years old pump I received as a child. Mine is missing the flip v-notch/peep hole type sight. Do you have one? New or used is OK. Thanks, Welton

I am looking for trigger spring item 25TS and rear sight item 25SR for my Model 25 circa 1960. Do you have anything like this available. I am trying to repair the gun I have owned for 50 years if possible and reasonable. I used it a lot so it shows considerable wear but no serious damage except for these missing parts. Thanks.

I need a shot tube for a Daisy Red Ryder, number 111, model 40. The year would be about 1947 to 1951. It should be in working condition. I could also use a leather thong and the nuts that attach the rear stock to the metl.
Thanks

If Rusty doesnt have the parts that you need, I do. However, give him a chance to respond to your request.