Have Daisy parts for most older models in stock Email rte6larry@windstream.net for parts & Service information

do you have any right side receivers for 1894 not broken or damaged daisy if so how much
thanks phillip

Yes have both pre safety and safety rec. sides for the 1894. Plus sears model and others.
Side rec. used R side would be $12.00, Left side $10.00 pre safety shipping is $7.00 contact rte6larry@windstream.net for more information

Hi
Do you have any of the white forearms for the Rocket command and Annie Oakley rifles
Thanks,Stevec

No forearms for your model, but have forearms for many other models

HI LEON COULD YOU GIVE ME A CALL AT 989-751-2901 THANKS PHILLIP

It would be nice if you would list the parts avaliable,unless there's 2 many.

Sometimes silence is golden,sometimes it's not.

Have way too many parts 1/3 of the basement is filled with parts or more 28' X 52' basement Adding more every day it seems

need parts for model#94 red ryder carbine 1953 -54 plymouth mi.need forarm and screw,left side ring,top screw behind rear sight and a butt plate.

Do you need plastic or the wood stocks, have screws did you need philip or flat can be reach at rte6larry@windstream.net

Thank you

Hello.
Do you have any shot tubes for Daisy Model B 500 shot or 1000 shot.
Daisy Model 27 1000 shot.

Tahnks.
Dan.

Do you have any King rifle parts?

i need shot tube for mod 107 and a targeteer shot tube

Yes we do happen to have a model 27 shot tube in stock used $85.00 +$15.00 for shipping No model B tubes at present time.
email for ordering information @ rte6larry@windstream.net Thank you

I have a Daisy model 350 shot airgun. Something is missing and gun go when cocked. Do you have diagram and parts for this model?

Hi, Looking for a forarm band for an older mod 40 111 mich gun.. Thats the wider band.. Would u happen to have one ?? regards gary.

Yes we have the wider metal bands for the 111-40 contact us at rte6larry@windstream.net

Thank you

Hi I am looking for a couple of Model 111 Model 40 Red Ryder air tubes also known as the plunger head. The ones with the seal on them. The older ones have a leather seal and the newer ones have rubber / neopreme seals. The gun has to be completely disassembled to install them.
I'm not looking for the shot tube. The one that unscrews from the front.

Yes we have the seals for the 111-40, The seal kit for the 111-40 is $18.00 + $6.00 for shipping These are the newer seals. If you have the older style , you need to cut 2 coils off your plunger spring for the new seals and air tube to work properly rte6larry@winstream.net

Hi I am looking for face seals for my power line 1200. Do you have them.
Hurshel Keylon
817-237-4603

Yes we do Thank you for your order

Leon do you have parts for daisy 880 BB/pellet gun? Mine leaks air so probably need all seals etc.?

If he doesn't have them you should be able to get them directly from the Daisy co.

Sometimes silence is golden,sometimes it's not.

Yes we have 880 parts rte6larry@windstream.net Thank you

Hello, I need a daisy red ryder stock for the model #111 model 40 2nd model.In ex. cond. Let me know if you have one. Thanks

Hi do you have a plunger assembly for a 1947 model 111-40 with the seal and air tube attatched? Also do you have a stock? Thanks.

yes have both items email at rte6larry@windstream.net Thank you

My nephew has recently aquired a daisy 22 long rifle it is suposed to have the 10 round rotory magazine but it is missing we are trying to find one but thus far have been unable to attain one. Do you possibly have one for sale or know were we might find one?

Have no parts for the Daisy fire arm rifles Thank you

would you happen to have a front wooden pump handle for a model 25? 7 or 7 groove?
thanks, will

Hi Leon,

I have a few questions:

1) Are the 1935 or before Model 25 side stock and trigger screws exactly the same as the 1940-1946 111-40 Red Ryder side stock and trigger screws?

2)Do you stock any of the above that have nice crisp slots with no twists or burring?

3) Do you have any small top stock screws in stock for 1940-41 Copper Band 111-40 Red Ryders?

I need four (4) sets of side stock/trigger screws and 4 small top stock screws.

Thanks very much,

Jerry L.

We will check and see what we have in stock email at rte6larry@windstream.net
Thank you

Hi Leon- Well it looks like you are the guy to go to for most old Daisy BB guns. I currently need one wood & two plastic stocks for Red Ryder Carbine Model 111-No. 40 and 2 plastic fore arms for same 2 guns. Both guns have the cast iron curved cocking lever currently installed. I also need one set of slotted screws & nuts and one set of Phillips head screws & nuts for the Red Ryders. Could you please check & see if you have these items ; and give me the costs for each item ? How do I pay you for these ; would you take a personal check ? Please let me hear from you. Thanking you in advance ; very sincerely- Roy (chevy2monkey). If you need to call , my phone number is 361-993-0807. Thanks- Roy

Leon Ive been trying to e-mail you at rte61arry@windstream.net I left a message in feb I have a plastic Red Ryder Carbine Model No. 94. plymouth mi. gun 1953- 54 I need forearm and screw, top screw behind rear sight,butt plate end, side ring left side. Bill B. 248-693-1672 sharkmangolfer@aol.com.

I have a Red Ryder Carbine Model No. 94 Ihave been trying to send e-mail to you at rtearry@windstream.net . I need a forearm and screw, butt plate both plastic, left side ring, and top screw behind rear sight. My gun is a 1953-54 model Plymouth Mi. Bill B. 248-693-1672 sharkmangolfer@aol.com.

email address is rte6larry@windstream.net You had wrong email Thank you

Leon do you have any of the parts I need. Please let me know. sharkmangolfer@aol.com Thanks Bill

Hello, I have a model 107 pump that the rubber cup broke, I know it's old, but not as old as me! Can you help me? Thanks

Yes we have seals for the 107 Daisy air rifle email is rte6larry@winstream.net

Need red ryder 94 forearm with band, leather thong ring assembly and rear sight

Do you have a plastic scope tube (rear sight tube) for a model 104 Golden Eagle?

What have you got for Plymouth red ryders golden eagles or 300 scopes? thanks charles

only have perhaps 1-3 111-40's in stock in various conditions others haven't look for awhile as to what we have. Can contact at rte6larry@windstream.net
Thank you

i regesterd but then when i go to log in it tell me my pass word is wrong .. i even tried the one they gave me

Herman, call Me at 248-632-0684,I have a model H I would consider selling. Also would consider buying yours, I need a shot tube & stock.

Hello,

Do you have parts available for this gun? My dad gave it to me and it seems weak when you shoot it. I would not mind bringing it back to life if you know what I might need to replace. I would like your advice. Please respond to my email rs2962@hotmail.com

Thank you,
Rick
Rick

Yes we have 96 parts contact rte6larry@windstream.net

I am needing the compression cup, a front sight, and the plastic ring that holds the forearm in place. These parts are for a Daisy, Model 1894. Can you supply these parts? --Lynn Fisher

yes we have all the parts you listed in stock email rte6larry@windstream.net for prices and shipping information
Thank you


leon

No. 11 Model 24 need tube. Thanks Bill

will check and see if we have one in stock rte6larry@windstream.net

Hi, I am looking for a sight tube for a Daisy Golden Eagle. I think the sight tube for a Buz Barton is the same except that it is blued. Would you happen to have either and if so, how much? Thanks, Darrell

hello leon i am missing some parts in the179 also is there a good parts break down pic and assembly manual avail..........what have you on this gun ? thankss airgntdr

Yes we have parts for 179 and factory manuals also for sale email rte6larry@windstream.net
thank you

DO YOU HAVE A MUZZLE PLUG FOR THE WESTERN AUTO DAISY MODEL 100U ? IT IS A LEVER ACTION MODEL AND WHAT I AM ASKING FOR IS MADE OF BLACK HARD PLASTIC,FITS IN THE BARREL END ,TO COMPLETE THE SHOT TUBE .IT IS APP.ONE INCH LONG,STAIR STEPS DOWN THREE TIMES NARROWING EACH TIME.
HOPE THIS HELPS'HOPE YOU CAN HELP ME
THANKS
DOUG

TYPOITIS A MODEL 1000

may have one in stock email me at rte6larry@windstream.net Thank you

Been tryin to email youi, keep getting error in delivery messages....

hi Leon looking for screws springs side plates etc do you have any thanks lawrence musgrave

I do have some 179 parts contact me at rte6larry@windstream.net with what you may need

Thank you

need front sights . for the above air rifle

Sight is on the frame , build into the frames

Hope this helps

I'm looking for a rear sight tube for a 103 Buzz Barton. Do you have one?

Hello Leon.
I'am looking for a magazine and a manuel for a 2003 co2 pistol.
Thanks Dan.

i have a dasiy air gun for sale model 104 with scope gun is in realy great cond. scope needs to be painted will ship to buyer on the price i have looked on the net. and will take the going price if you know anyone that is looking foe one let me know limelt@verizon.net

Hi looking for a six inch barrel or the barrel set and the tool used to change these barrels for a daisy model 44 revolver, wondering if you had these or if you might know where i can find them any information you could give would be appreciated. Thank you

I am looking to buy at least 2 magazine for the Daisy Model 2003 Pistol Thanks

Hi Leon- Do you have any magazines for the model 2003 and if so how much? Need any and all I can get. Rick

Yes we in stock email at rte6larry@windstream.net

Do you have a stock and forearm for a model75 Scout? Thanks Ken

We may one in stock email at rte6larry@windstream.net

Thank you

Do you have the feeder, follower parts for these revolvers ??

Yes we have in stock email is rte6larry@windstream.net
Thank you

HI, I NEED A COMPASS FOR A BUCK JONES STOCK, COULD YOU SEND ME INFORMATION.
ROBERT. THANKS

HI, I NEED A COMPASS FOR A BUCK JONES STOCK, COULD YOU SEND ME INFORMATION.
ROBERT. THANKS

I am looking for a No 300 scope and bell target for a Daisy "Gun-N-Scope Target Outfit"

will check to see if we have in stock no 300 scopes in stock at present time email is rte6larry@windstream.net

Thank you
Leon

I need the trigger spring(s) as my model 25 will not cock . . . need cost and availability if you have


thankd

bill

25TS is $5.00 + $6.00 for shipping contact @ rte6larry@windstream.net

i have an older daisy 880 lot number 6k12504 that needs a pump cup an seals ...the seals if they are just o rings i can get locally if that is true
i also have a daisy 99 an want o no if there is a manual or parts diagram available an if parts are still available ?? do you just deal with daisy parts ???

Yes we have 880 seal kits, we also have parts for your other rifle rte6larry@windstream.net

i need yer address to order some parts for the 880 what i need is the seals an check valve and rear sight with prices an cost to ship
also do you take a check ??? do you also have parts for any crossman guns

sorry just need seals an checkvalve an then hopefully it will pump up

do you have parts for a model 26??????????????

Yes email rte6larry@windstream.net