<< Previous Topic | Next Topic >>Return to Index  

Daisy model 25 parts

December 6 2010 at 7:44 PM
Rusty  (no login)
from IP address 64.12.116.134

 
I everyone. I have collected quite a number of model 25 parts over the last few years and thought I might sell some. I have around 15 or so original shot tubes included some of the very first nickel ones. I also have a couple cork tubes. I have a number of the flip rear sights and regular ones. a number of plunger assys. Probably around 20 or so takedown bolts. A few stocks and forearms etc. I know the new 25 shot tubes that look nothing like the original have hurt the market on the old ones but they are not originals. Prices would depend on what you are looking for. Thanks, Rusty

 
 Respond to this message   
AuthorReply
Bob Griffin
(Login tinkernut52)
67.168.42.201

Daisy 25

December 11 2010, 4:55 PM 

Hello Rusty, I need a Model 25 Plunger Assy, The one I have is Rubber and not Sealing and was hoping to replace it with a Leather Plunger Assy From what we can tell the Gun is a 1952 ? vintage What do you have Thanks Bob tinkernut98444@yahoo.com

 
 
Woody
(no login)
68.201.90.77

Re: Daisy model 25 parts

December 19 2010, 2:10 AM 

need a whole flip site assy for a 1954 model 25 do you have one complete in good condition, thanks

 
 
will
(no login)
199.27.130.80

Daisy 25 rear flipsight

March 24 2011, 11:16 AM 

I have a pre 1927 #25 missing the upright part of the rear sight. Can you supply? please respond to me via email.

thanks
will

 
 
ROBERT
(no login)
68.179.184.125

DAISY TARGETEER

April 2 2011, 11:22 PM 

WOULD YOU HAVE A SHOT TUBE FOR THE DAISY TARGETEER PISTOL

 
 
Richard Buckner
(Login Buckeneer)
72.251.76.162

Parts Request

April 11 2011, 1:12 AM 

Hello Rusty,
I am looking for two old style (with leather) plungers, part # 25-PH, for older model 25 Daisy pumps made in the 30's. The new rubber style won't work.
I am also looking for a strong plunger spring, part # 25-PS, for a model 25 daisy short stroke pump (3rd Varaint) and a large break down straight slot screw in good condition for this 3rd Varaint pump.
I am also looking for a clean receiver with trigger and spring plus a clean wooden stock for a Daisy model 25 from the 30's.
My e-mail is waynebuckner@earth-comm.com . I would like to talk to you by e-mail or phone. Please let me know about the availability of these parts and their costs, including shipping to 77530 (Houston,Tx.). Thanks.
Wayne


 
 
Jamey Visga
(no login)
76.112.105.59

Daisy model 25 cork shot tube

April 18 2011, 10:13 PM 

I was wondering if you have any cork shooting tubes left for the Daisy model 25? Thanks

 
 
Joe
(Login builderdude)
75.181.81.106

shot tube

May 6 2011, 10:09 PM 

wondering if you have any of the older nickel shot tubes thanks Joe

 
 
Dolk
(no login)
98.234.194.230

Regular Sites

May 29 2011, 4:51 PM 

I need a "regular" rear site. I think it screws on???

Let me know!

Dolk

 
 
Dolk
(no login)
98.234.194.230

Regular Sites

May 29 2011, 4:57 PM 

I need a "regular" rear site. I think it screws on???

Let me know!

Dolk

 
 
kris
(no login)
174.88.138.247

value

June 17 2011, 8:19 PM 

I have on old daisy 25, 1926,and its in good working condition,could you give me an idea about the value .

 
 

ejwills
(Login oldwizzer)
71.181.134.22

Value.

June 18 2011, 11:15 AM 

Condition plays a big part in trying to value anything. A picture would go along way in making a determination. If you can't supply a picture then while looking at the gun give a real good description along with any markings.Using a phrase like "good for its age" does not reflect the real condition of an item.

Sometimes silence is golden,sometimes it's not.

 
 
Larry
(no login)
108.38.169.41

#25 takedown screw needed

July 27 2011, 7:42 PM 

#25 DAISY air rifle bb gun takedown screw needed, just 1 and reasonable $$.

 
 
Darrell Shumway
(no login)
68.103.102.211

Model 25 plunger assembly

December 8 2011, 3:03 PM 

I am looking for a model 25 plunger assembly. I am not sure how old the gun is but it has Plymoth Michigan on the receiver. The leathers and the tube on the end of the assembly are missing on my gun. DLS

 
 
David Keene
(no login)
108.57.38.206

Daisy No. 25, Mfg. at Plymouth Michigan plant.

December 22 2011, 2:52 PM 

I'm looking for a very good 50 shot tube and if you have instructions for replacing
the main cocking spring. I have the spring but can't figure out how to install it.

 
 
Frederick
(no login)
174.126.40.79

Model 25 trigger spring

December 25 2011, 8:48 PM 

Rusty: My daughter gave me an older model 25 (probably 50's). It is missing the trigger spring. Do you happen to have one?

 
 
David Mattison
(no login)
174.58.23.115

model 25 parts

April 26 2012, 10:24 AM 

the posting is 2 years old but thought I'd give it a try anyway. Was wondering if you still had any parts left yet? I was looking for the heavy duty pump spring and a nickel shot tube. I have an older model 25 that I rescued but it's missing parts. Would appreciate any help you could give. Thanks, Dave

 
 
David Mattison
(no login)
174.58.23.115

model 25 parts

April 26 2012, 10:38 AM 

the posting is 2 years old but thought I'd give it a try anyway. Was wondering if you still had any parts left yet? I was looking for the heavy duty pump spring and a nickel shot tube. I have an older model 25 that I rescued but it's missing parts. Would appreciate any help you could give. Thanks, Dave

 
 
Steve
(Login guitarer)
71.229.78.240

Dave re: parts

April 28 2012, 10:21 PM 

Dave,
Write daisydoctor2@aol.com, he has the parts you need. I recently bought some penny-sized take down screws & a blued lead-shot tube from him. If he doesn't have it, it can't be had!

 
 
Scan
(no login)
74.79.102.48

upper part of rear sight on daisy 25

May 8 2012, 6:46 PM 

Hello: Can you please help me. I lost my upper part of rear sight on my daisy model 25. I guess it just screws on. Can you help me?

Scan 315-894-8958 or scanastafan@aol.com

 
 
 
< Previous Page 1 2 Next >
  Respond to this message   
  << Previous Topic | Next Topic >>Return to Index  
 Copyright © 1999-2014 Network54. All rights reserved.   Terms of Use   Privacy Statement