The Radio & Radar discussion forum.

A discussion forum on Allied WWII Radio & Radar equipment.
Feel free to put here your questions and respond to other readers questions,
whatever has a relation to allied radio and radar equipment.

If you have equipment for sale or wanted go to the
  Electronics & Communications classifieds

Original WWII Technical Manuals

by

WWII Original copy Military Tech Manuals =
Send me your wants No catalog or list available due to no time at my age (80)
I am a disabled wwii combat vet www.wwiibuddy.com
Thank you
Al

Posted on Aug 6, 2003, 11:02 PM

Respond to this message

Goto Forum Home

TM11-4009 for BC-1306 radio

by

Do you have a technical manual from the War Dept, TM11-4009 (May 1945) for a BC-1306 Radio receiver and transmitter?

Thanks
-Paul

Posted on Sep 24, 2003, 8:39 PM

Respond to this message

Goto Forum Home


Operation manual for a BC-1306?

by

I am looking for an operations manual for a BC-1306
radio.

Posted on Sep 29, 2003, 5:40 PM

Respond to this message

Goto Forum Home


Re: Operation manual for a BC-1306?

by m

see : http://www.qsl.net/w6ger/pdfdocs/SCR694/PDFDownload.html

Posted on Jul 16, 2008, 4:21 AM

Respond to this message

Goto Forum Home


manual needed

by

Hi,
I'm looking for diagram of the AC power supply used with Collins TCS-12 receiver/transmitter.
A long shot I know, but I'm open to suggestions.
Thanks,
Terry, WL7JG

Posted on Nov 5, 2003, 7:36 AM

Respond to this message

Goto Forum Home


TCS 12 schematic

by Dallas

Try Robert Downs WA5cab@cs.com
Dallas

Posted on Nov 5, 2003, 4:00 PM

Respond to this message

Goto Forum Home


Re: TCS 12 schematic

by

Iam lookinng for a TCS-12/14 "CD-disk copy manual. .....Benard

Posted on Nov 8, 2008, 11:19 AM

Respond to this message

Goto Forum Home


TCS-12 AC power supply circuits

by

I have the circuits for the Types -20218 and -20242 PSUs, in a TCS-12 manual. If these are the ones you want, I can email you a copy. Just let me know.

73s

Richard, G7RVI
VMARS Archivist

Posted on Nov 8, 2003, 7:33 AM

Respond to this message

Goto Forum Home


re T1509

by

I worked on the T1509 in Gibratar in 1953 and would appreciate it if you could advise where I might obtain a photograph of it.

James

Posted on Jul 25, 2005, 10:01 AM

Respond to this message

Goto Forum Home


T1509 photo

by Richard Hankins

You asked about a photo of the T1509. Quite a few of these transmitters survive in the UK, and the VMARS archive has the manual for it. I can't quickly arrange a photo of one of them, but I can send you the (quite good) picture from the manual. Will that do?

73s

Richard
G7RVI

Posted on Jul 25, 2005, 10:36 AM

Respond to this message

Goto Forum Home


Admiralty T1509 Transmitter [serial : 1401]

by

Hi James! Don Collie jnr [ZL4GX] here. I have a fully restored T1509 sitting in my workshop, and can send you photos if you like. I`m loking to contact other T1509 owners, with view to swapping technical info, ideas etc., and perhaps also parts. Do you know of any other T1509 owners? Send me your email address, and I will send you any photos that you like!
Cheers de : Don [ZL4GX]

Posted on Dec 25, 2007, 12:04 AM

Respond to this message

Goto Forum Home


Catchup

by

Gidday Don,
How's life? I see you've got your old man's callsign - that's brill.
Remember me? - I was ZL4CB then went to UK for a few years (25 to be exact) was G4HST there,
now back in NZ just outside Nelson.
Still own and manage www.medistat.co.uk from here and still doing private neurophysiology here.
Building a boat www.english-family.net/boatbuild and 2 kids www.english-family.net/lucy and www.english-family.net/charlie
Lige is good.
Where are you located - ?still in Ingill.
Is the T1509 the one that yr Dad was restoring when he lived in Thurso Street and if so, is it running?
Cheers Owen English


Posted on Nov 21, 2009, 8:08 PM

Respond to this message

Goto Forum Home


AC power supply for TCS 12

by

I have a copy of the schematic from the original manual which I can scan and send to you as an email attachment.
The same goes for the receiver and transmitter schematics.
Tell me which of those you need and what internet connection you have, broadband I hope, as they will be large files.

73, Erwin

Posted on Feb 14, 2004, 1:33 PM

Respond to this message

Goto Forum Home


AC power supply for TCS 12

by

I AM WORKING ON A PROJECT THAT CONCERNS RADAR TECHNOLOGY
I WOULD BE PLEASED IF YOU COULD HELP ME OUT IN SENDING ME SCHEMATICS FOR
AC power supply for TCS 12.


Posted on May 22, 2004, 8:26 PM

Respond to this message

Goto Forum Home


AS-943/SPS-29 Shipboard Radar

by

I am looking for a technical manual for the SPS-29 shipboard air search radar system

Posted on Mar 21, 2004, 1:44 PM

Respond to this message

Goto Forum Home


T14J/TRC1

by

Hello,

I'm looking for a schematic of the US transmitter WWII T14J/TRC1

Regards

Olivier

Posted on Oct 27, 2009, 6:42 PM

Respond to this message

Goto Forum Home

AP10953 Magslip info

by

Does anybody know where I can find some technical information on this magslip receiver and transmitter I would be very interested in finding a spare transmitter as I am attemting to repair an Dish rotator and the transmitter is 300ft up a mast.

Posted on Oct 25, 2009, 8:17 AM

Respond to this message

Goto Forum Home

Wanted WWII cavity magnetrons and info

by

Hi,

I am looking for WWII magnetrons to add to my collection, e.g. CV38, NT98, CV41, CV108, etc.

If anyone has any to sell/trade pls let me know.

Also if anyone has any info on what bits of gear used what maggie that would be very useful.

Jeremy.


Posted on Jul 2, 2003, 5:39 AM

Respond to this message

Goto Forum Home

ASV 6C Magnetron

by

I have a magnetron from an ASV 6C. In poor condition, 1 end cap removed, no cathode or heater, external copper-glass connections cut off short. Has been used as paperweight for last 35 years. Also I have IF strip from Rebecca IV , complete and in good mechanical condition. Has not been fired up for some 40 years so dont know if it will work.

Posted on Oct 22, 2009, 3:28 AM

Respond to this message

Goto Forum Home


Radios

by

I have a BC611 and a BC1000. Is there a way to make them capatable. Both work but originally they are not compatable. Thanks Joe

Posted on Oct 12, 2009, 8:42 AM

Respond to this message

Goto Forum Home

T1154 and keying of same

by

I remember as a RAF Cadet in 1958 using a R1155/T1154 combination on the RAF net. Every time you pressed the key a large relay clanked on the top of the TX. I recently read that sometimes because of the finite time it took for the relay to pull in ,the first dot could be lost or the first dash shortened. Is there anyone out there that actually used this kit in Lancs and could confirm or deny this.
Was it just an antennae changeover relay or did it actually switch some part of the circuit on or off. I would be very greatfull for any information.
(Incidentally I do get out quite often, I am researching this to clarify another historical event. !)
Many thanks.

Posted on Apr 4, 2002, 6:31 AM

Respond to this message

Goto Forum Home

Re: T1154 and keying of same

by

Ken,

can't tell how things worked operationally, as I wasn't around. I can tell you what the key does to the Tx, as I have just added AP2548A Vol.1 Ch.1 to the VMARS website (where anyone can grab a copy if so minded). This has all the circuits for each model.

As you rightly say, the key controls a keying relay (designated A/12), which switches the following items between send and receive modes:

a) the MF aerial between the Tx o/p and Rx i/p
b) the HF aerial between the Tx o/p and Rx i/p
c) the phones between the Tx sidetone and the receiver audio
d) with the key down the negative bias on the Tx valves is removed thus producing output

Richard

Posted on Apr 30, 2002, 12:16 PM

Respond to this message

Goto Forum Home


Re T1154 and keying of same.

by

As a signaller/gunner flying in many aircraft [Lancs, Lincolns, Ansons, Varsity, Valetta and Shackletons] equipped with the Tx1154/Rx1155 combination I can assure you that I never noticed any problems of this sort. The 1154 was a very reliable piece of equipment........although the aircraft Morse keys left a lot to be desired!
Hope that helps.
Robert H Mercer.

Posted on Oct 11, 2009, 2:08 AM

Respond to this message

Goto Forum Home


T1154 keying.

by

Ken.
I don't think you will find may old timers left who flew on Heavy's during WW2, but for what it's worth, I spent 5 years as a Wireless Op with the RAF in the 50's. The T1154 was well on its way out at that time, and although it had done it's job to perfection throughout the war, there is no escaping the fact that it is possibly one of the crudest designed transmitters ever built.

The relevant AP reference to the 'Magnetic Relay type 85' specified that it is designed to operate at speeds of 25 WPM or more. Given the distance the contacts must travel and return each time the key is depressed, and the simple mechanical design of the assembly, this estimate seems absurd to say the least. A good wireless operator could send at 25WPM using an RAF type 'D' ground station key, but not on an aircraft Bathtub key while wearing leather gauntlets.

After a great deal of careful contact adjustment on my own treasured T1154, the best it can do is 15 - 18 WPM, with a regulated 6.5 Volt supply for the keying voltage. The relay undergoes a full movement each time the key is closed, so the problem of clipping a dot or dash would not be confined to the first character sent, but would continue throughout the transmission.


Posted on Jun 23, 2008, 12:49 PM

Respond to this message

Goto Forum Home


RA-1B Receiver

by

Looking for any info for a RA-1B receiver made by Bendix Radio.

The Frequency range is .150 - 1.50 MC
and 1.80 - 15.0 MC

Any one know where this radio would have been used?

Thank you,

Don VE3DDQ


Posted on Nov 30, 2001, 8:04 AM

Respond to this message

Goto Forum Home

Bendix RA-1B receiver

by

There is a reference to the Bendix RA-1B as the receiver installed in Amelia Earhart's plane on her unfortunate around the world trip. It's message 10 on the following website:

http://www.tighar.org/forum/Highlights101_120/highlights105.html

The other messages are all part of a discussion of her last flight, which I did not read.

In general, the receiver is for installation in aircraft. Presumably, there was a companion transmitter, but I don't know what it was, and I am trying to find out all I can about both. Perhaps someone can add to my meagre information.
Hope this helps.
73,
David Edsall, W1TDD
Amherst MA


Posted on Feb 18, 2003, 10:58 PM

Respond to this message

Goto Forum Home


BENDIX RA-1B

by

I Live in England and have a fully working RA-1B receiver, it came from RAF Burtonwood at the end of the second world war.
I too have limited info but I do know they were fitted as standard to Catalina flying boats.
John

Posted on Jun 16, 2003, 8:55 AM

Respond to this message

Goto Forum Home


Re Bendix RA-1B

by

I also have a RA-1b in working condition.
I obtained it about 40 years ago from the Airline
I was working for ( T.C.A) complete with schematics.
I have been unable to track down if TCA ever used it
on their Lancasters or Lockheed 10's but still trying.
The companion xmtr was the TA12. The rcvr could be used with a cable connected remote head and also
antenna switching from D.F/trailing antenna/fixed antenna.

A prototype model (RA1) which I believe only covered
up to 7.5meg was installed on AEarhart's 10E aircraft
along with the RDF loop ant.
George VE1NK



Posted on Nov 16, 2003, 10:54 AM

Respond to this message

Goto Forum Home


I too have a RA-1B, need schematics

by

Hello
I also have one of these radios. I dug it up at my old high school when I was in my teens and have made it operational. I would like a set of schematics/manual so I could figure out how to tune it. Does anyone know where I could get a copy?

Mike Mytko
Canada

Posted on Mar 22, 2004, 5:45 PM

Respond to this message

Goto Forum Home


re RA-1B schematics

by George

Hi Mike,
this site will give you the schematics for
your RA-1B.
http://users.froggy.com.au/vk2zio/museum/ra1b.htm
If not, I can scan and sent you
a copy of mine.
I have been running mine for over 40 years
with only the odd tube replaced. Rugged built set.
By the way, this rcvr was used on the AC/TCA
"North Star" aircraft on their Trans At. runs
using the companion Bendix TA12 transmitter, back
in the mid 40's-50's. I know and talked with
flight Radio Operators that used them.

George Nova Scotia


Posted on Jun 1, 2004, 6:29 PM

Respond to this message

Goto Forum Home


Have RA-1B manual

by Ron

5/21/2006

I have a copy of the RA-1B manual. Does anyone still need a copy? I have two of the radios but they were "hammed" by the previous owner. I would like find an unmodified one.
zagnorch@ispwest(dot)com KD6HZY

Posted on May 21, 2006, 6:50 PM

Respond to this message

Goto Forum Home


RA1B manual

by

I recently acquired a Bendix RA1B receiver and I see you have a manual. I would like to have one. Do you supply ohotocopies or do you sell originals and what is the price?
Thanks

73

Don VE1DLT

Posted on Jul 30, 2006, 5:53 AM

Respond to this message

Goto Forum Home


Re RA1B

by George

Don
Are you still in need of Schematics for this Rcvr??

I have all the info on it and will gladly sent you what you need. Send me an E mail and I will scan and send it to you.

VE1NK "at" rac.ca (replace "at" with @)

73
George

Posted on Jan 23, 2007, 6:06 PM

Respond to this message

Goto Forum Home


RA1b manual

by

Hi.
I have an RA1b receiver which was working until recently when a bulb in the power supply went up the creek. I am hoping to get my hands on another SK44 bulb but would really appreciate it if you still have the manual.
If so i check my emails on a regular basis at the local library and would appreciate it if you could get in touch.


Posted on Sep 21, 2007, 5:13 AM

Respond to this message

Goto Forum Home


RA-!B

by

I would be interesred in obtaining a copy

Posted on Oct 5, 2009, 9:50 AM

Respond to this message

Goto Forum Home


RA1B radio

by

Can you send me a copy of your schematic for the Bendix RA1B receiver. I recently acquited a working one. Please let me know the cost.

Thanks

73

Don VE1DLT

Posted on Jul 30, 2006, 5:57 AM

Respond to this message

Goto Forum Home


RA-1B receiver (posted by Don)

by

Yes ! This black wrinkled painted wonderful receiver was used on Lockheed Lodestar aircrafts (BOAC) during the early part of the '40.

I used to repair them when I was at the Almazah RAF air-station, (Radio Shop N°2) when the aircraft had to undergo a "CHECK-4" or the more stringent overall of the "C of A".

Almaza base was, and I guess still is, an extension of Heliopolis, next to Cairo. Further away was the US Airbase called JOHN PAYNE.

Need more help ?



Posted on Aug 27, 2005, 3:14 AM

Respond to this message

Goto Forum Home


RA1B useage

by

This Unit was used extensively on C47 -DC3 aircraft together with the TA2 Transmitter and their Dynamotor Power supply.
There were some 14 Volt versions of this equipment but they are very rare.
Remote tuning of the Receiver was effected by a Remote Control unit using Bowden Cables and electrical interwiring.

Posted on Feb 13, 2007, 3:40 AM

Respond to this message

Goto Forum Home


I need to know about radar in World War II

by Matt

I am doing a school project on radar in WWII and I was looking for some good websites with information about radar, who invented it, which country was the first to use it, how much it affected the war. If anyone can give me some information about this topic I would greatly appreciate it.

~Matt

Posted on Feb 22, 2002, 12:04 PM

Respond to this message

Goto Forum Home

Radar

by

Get the book Echoes of War: The Story of H2S Radar by Lovell from the library or on interlibrary loan. Also check www.radarworld.org

Posted on Mar 14, 2002, 8:28 PM

Respond to this message

Goto Forum Home


Radar in WW2

by

I possess a great deal of info on WW2 radar having served as a radar mechanic on the Royal Navy and having worked in that field all my life.I can tell you about German, French, Dutch, Japanese, Italian and British
and American efforts on radar all prior to 1939.
it is a very interesting story.Are you interested?

Posted on May 12, 2002, 5:36 PM

Respond to this message

Goto Forum Home


Radar Equipment used by Marines in South Pacific

by

I am looking for some information on a particular type of radar equipment I think my father used during World War II while stationed in the South Pacific. My father was a Marine radar operator and I think he used some equipment that had a visable (glowing) vile (approximately 3" high)containing ionizing radiation. Would you be familiar with this particular unit and if so, could you tell me the alpha-numerica designation and/or manufacturer? Thank you

Posted on Jul 1, 2002, 9:01 AM

Respond to this message

Goto Forum Home


Re: Radar Equipment used by Marines in South Pacific

by

Ms Stone: I was a Radar Operator with the 12Defense Bn., USMC, in WWII. We used two radars. One was a SCR-268, assembled by Western Electric and was a short range radar, 22 miles, and used as a gun director. The other, SCR-270, assembled by Westinghouse, was a search radar and had a range of 120 miles. At times the range would exceed this if the conditions were good. Regards. Vic B.

Posted on Oct 10, 2002, 6:46 PM

Respond to this message

Goto Forum Home


ww2 radar

by

my dad also worked on radarin the philipens byt with the army the unit was call sign VM33 other than that i dont know mutch of the system he used but would like to find out about it

Posted on Feb 3, 2003, 9:59 AM

Respond to this message

Goto Forum Home


know my dad?

by

My dad was involved in talking bendex into working with the usaf to install radar. His name is Col. George G. Getz. Did you know of him. I am always looking for others who might know him and can share stories. Please e-mail if you have info on him to my e-mail adress

Posted on Aug 29, 2007, 8:04 AM

Respond to this message

Goto Forum Home


Re: know my dad?

by

Hello,

Oddly, I fell across your father's name on the web, and this note from you. I find it intriguing that his name is the same as mine. My middle name is Gordon. I live in Arlington VA, so I am going to look up your father's gravesite at the cemetery and visit it to pay respects. Any suggestions? Who knows, we may be related. My grandfather, Frank Gordon Getz, was born in I believe, Genoa, Ohio, and my name is a family name, a combination of a couple family members.

Sincerely,
George G Getz
Arlington VA 222o1

george.getz@verizon.net

Posted on Sep 21, 2009, 5:15 AM

Respond to this message

Goto Forum Home


WWII radar operator

by

Dear Karen -

My father was Larry "Al" Wilkinson, a sergeant in the 1st Marine Div., 12th Anti-Aircraft Battalion. He was stationed on Peleliu in the S. Pacific.
His radar trailer unit was set up on the SE tip of the island. He was 19-20 at the time.

I don;t remember that he mentioned anything about the glowing tube thing, but I think the radar screen itself was a primitive tube, like a TV
tube, but simpler. I think the screen was coated on the inside with a chemical (something that's fluorescent when the electrons hit it) so it
would glow a little bit to show the targets. Does this sound right?

I haven't learned much about it. My dad wouldn't talk about it for
years. Then we'd mostly try to ask him about his experiences, rather than the technical stuff. He died in 2000, but I think he felt good that he was able to talk about it, and meet up with some other old Marines.

I'd like to know more about this, and the men who ran them.

Thanks- Craig Wilkinson

Posted on Jun 9, 2004, 12:50 PM

Respond to this message

Goto Forum Home


WWII Radar Ops

by

My grandad, Frederick Day, served with "a Marine Transport Squadron" in the South Pacific. I haven't found anything of his with the actual squadron designation on it. He received a Bronze Star for setting up some type of radio beacon... but he doesn't like to talk about any of his experiences.

Besides the Post Traumatic Stress Disorder, I wonder if a lot of these WWII vets are still affected by the high level of classification some of their gear must have had back then.

I haven't been able to find any information on USMC operations involving radio beacons in the Pacific during the war.

Tim

Posted on Nov 30, 2004, 5:49 PM

Respond to this message

Goto Forum Home


does youre dad know mine?!

by


My name is Katherine Deviney and my dad was very involved in radar and wondered if you might know of him . He served in ww2 and korea and vietnam as a USAF Col. He was very involved in the start up of radar and got Bendix radio to go in on the project. His name is col george g. getz. He was called Mr. radar and sometimes George Getz. He worked in war plans and developed the shape tacan plan as well i am attaching his biography -he is now buried at arlington national cemetary in section 66. If you knew him you might could share some stories. Please respond to this e-mail and let me know I am also attaching an article about him and bendix radio. I will have to e-mail you a second time with the bendix article
Thanks Katherine deviney!
Retired. United States Air Force Colonel George G. Getz, 85, died Monday, November 1, 1999, at the VA Hospital in Tucson, Arizona. He was born June 8, 1914 in New Philadelphia, Ohio.
Colonel Getz graduated from North Carolina State University in 1937 with a BS in electrical engineering. A veteran of World War II and the Korean War, Colonel Getz retired from the United States Air Force after 30 years of service. Additionally, Colonel Getz received a masters degree in Engineering in 1949 from the U.S. Air Force Institute of Technology. In 1954, he graduated from Air War College where he studied Geopolitics, International Affairs, Military Strategy and Programs and Weapon Systems.

During Colonel Getz's career in the USAF, he served as commander in the development, implementation and management of Ground Electronics Engineering Installation Agency (GEEIA) Project, which served to provide the U.S. Air Force with world wide military ground and airbornecommunications, support to the National Range Division and White House Communication Agency, as well as provide assistance to other USAF commands, DOD, and other government agencies. Colonel Getz also served as Deputy Chief of Electronics Branch Signal Division Supreme Headquarters Allied Powers in Europe (SHAPE) from 1 954-1957, where he coordinated the NATO plans and programs for electronic systems used by the 15 NATO nations and included the development and coordination of the SHAPE, TACAN Plan, and the NATO Air Defense System. His duties also included representing SHAPE for Electronics on International Coordinating Committees and U.S. interests on Strategic Operations.

Colonel Getz was a member of Lucy Chapel in Danville, Georgia.

Surviving are his beloved wife, Betty B. Getz of the home; daughters, Jeanette Getz Haverty of Greenville, N.C., Katherine E. DeViney of Charlotte, N.C.; grandchildren, Andrew Getz Haverty of Greenville, N.C., George Glen Huffman, Jamie A., and Ericka L. Deviney of Charlotte, N.C. Visitation at Jefferson Funeral Chapel, Alexandria, Va. (703)971-7400, on Thursday, Nov. 11, 1999 from 5:00-7:00 P.M. Graveside services will be held at Arlington National Cemetery on Friday, November 12, 1999 at 9:00 a.m.


--------------------------------------------------------------------------------
Posted: 15 July 2001 Updated: 20 November 2005


Posted on Sep 6, 2007, 5:14 AM

Respond to this message

Goto Forum Home


Re: does youre dad know mine?!

by Tim day

I don't think my grandfather knew your Dad - Marine and Army efforts were geographically separate in the Pacific in WWII. Even if he did know him, his current condition is such that I don't think he would be able to communicate it now.

Posted on Sep 6, 2007, 2:49 PM

Respond to this message

Goto Forum Home


thanks

by

Thanks Tim for responding. I really appreciate it,
Liz

Posted on Sep 7, 2007, 6:12 AM

Respond to this message

Goto Forum Home


ww2

by

in ww2 i was a radar tec1942 equador& 1943 &44 galapagos islands &1945 in panama jungles, worked on units 270 & 271 so only 30 men & i have never been able anyone, i am now 85yrs, charles b. imperio

Posted on Sep 1, 2009, 6:58 PM

Respond to this message

Goto Forum Home


disable vet.

by

in 1942 i went the us signal corp radar, 1942 till 1945. i was in the american theater of war; i was in the 554th signal aw bn. we worked 30 at a station.. i am 82 yrs old now, i can;t find any info about my outfit. i was in aquador, galapagos islands & panama junjles. i was attached to the armys 6th air force.if any knows anything about this part of ww2 please let me know. charles b. imperio. keyser, WV.

Posted on Jul 30, 2006, 6:50 AM

Respond to this message

Goto Forum Home


5554th Signal Air warning Battalion

by

Your the 1st person i've heard of/from this outfit. I was in the army air corp as a cadet.My ashmawashed me out & the gave me the options of flight crewmen & I chose radio. Trained at Souix Falls & Scott Field Air fiels schools. Sent to Panama & attached me to 554th. I was at different outposts: One overlooking what is now the main airport of Panama City. Also Rio Hato & the Santa Maria (near Agua Dulce) and finally Punta Barrica (between Panama & Costa Rica not too far from David). I was there from 1945 until my discharge in1946. I was always isolated. Either by myself or with 2 or thre others but the only technitian that understood radar or radio. Got malaria traeting a native for it in a grass shack. Had the only medical supplies in a 30 mile radius with no roads. Good to hear from another. I live in Miami Beach & am 80 yrs. old. Would like to hear from you.

David

Posted on Oct 30, 2006, 10:11 PM

Respond to this message

Goto Forum Home


ww2 radar

by

our head guarters was under a mountian in panama canal zone our home base was at Albrook field , when w was far away we sent our enimey targets there & SOMEONE WOULD INTERSEPT THEM, we were attached to the armys 6th air force. some times the navy wpould intersept. we had P 40s,P39. we madw sure yhe japs could;nt get the panama canal. i was in the american of war 3yrs & 3 months & 1945 got out on points. i am 82 yrs old now & getting along ok ,but its hard for me to type. charles b. imperio, WV.

Posted on Jan 6, 2007, 2:12 PM

Respond to this message

Goto Forum Home


ww2 vet

by

i spent over 3 yrs as a radar tec equdor. galapagos islands, % panama jungles got out 1946 on points, i run big units 27O s & 271s
. i would like to talk to someone about thoes times i am 85 yrs old, charles b. imperio rt 6 keyser wv 26726. phone 304 355 8871.

Posted on Aug 29, 2009, 6:45 PM

Respond to this message

Goto Forum Home


WWII Galapagos

by

I am working on Army histories of units in Latin America during WWII. Do you know what Army unit was on the Galapagos with elements of the 6th AAC and the CBs? wayne (US Army-retired)

Posted on Dec 20, 2006, 5:30 AM

Respond to this message

Goto Forum Home


ww2 radar

by

i was in the 554th signal aw bn ,attached to army 6th army air force. i was on a very small island of the galapagos islands as a radar tec, 1943 & 1944.we only had 30 men to run a unit (271). charles b. imperio WV. i am 82 yrs old now.

Posted on Jan 6, 2007, 2:36 PM

Respond to this message

Goto Forum Home


Col. Getz

by

You might very wellknow my dad...USAF..Col. George Glen Getz. He did alot with Radar and allied europe communicaztions-DO you?

Posted on Apr 16, 2008, 8:37 AM

Respond to this message

Goto Forum Home


disable vet.

by

in 1942 i went the us signal corp radar, 1942 till 1945. i was in the american theater of war; i was in the 554th signal aw bn. we worked 30 at a station.. i am 82 yrs old now, i can;t find any info about my outfit. i was in aquador, galapagos islands & panama junjles. i was attached to the armys 6th air force.if any knows anything about this part of ww2 please let me know. charles b. imperio. keyser, WV.i worked on 270s & 271s;'

Posted on Jul 30, 2006, 6:51 AM

Respond to this message

Goto Forum Home


i want info on radar in ww2

by

i saw this message that said you know a lot about radar in ww2, and i am doing a report on it and i would like to have some of that information.

Posted on Oct 9, 2002, 3:40 PM

Respond to this message

Goto Forum Home


I'm Also Doing a report on Radar in WWII

by

I'm also doing a report on radar in WWII, I need to basically summarize radar in WWII with an 80 word limit. Anyone of you Military specialists can help out if you want.

Posted on Jan 4, 2004, 9:14 AM

Respond to this message

Goto Forum Home


RADAR WW2

by

IF INTERESTED I WAS A m/sGT REPAIRMAN ON A 584 RADAR USED IN ITALY AND SOUTNHERN FRANCE FOR CLOSE SUPPORT BOMBING. WITH THE DESERT AIR FORCE IN ITALY WW2/.

Posted on Jun 19, 2004, 3:33 PM

Respond to this message

Goto Forum Home


WWII Signal Corp

by

Hello,

My father was a member of the 562nd and later the 582nd SAW Battalion during WWII. I believe there were some other names for his unit as well, maybe 2691st and 734th? He served in North Africa, landed on Pantelleria and continued on to Italy and France. He was a radar mechanic and I believe his military occupation number was 514. I do not recall how I came upon this site and your address. I had it bookmarked some time ago. I would be interested in comparing notes with you.

Sincerely,

Ms. Jody Labernik

Posted on Oct 24, 2005, 8:28 PM

Respond to this message

Goto Forum Home


ww2 radar

by

i was in ww2 from 1942 til 1945, in the 554th signal aw,attached to armys 6th air force, i was a radar operator on units 270s & 271s. i was in aquador,galapagos islands & panama jungles. we protected the panama canal. our units could pick up a target 200 miles. our interseptions were by p 40 & p39s. charles b .imperio from WV. i am 82 yrs old now.

Posted on Aug 31, 2006, 11:35 AM

Respond to this message

Goto Forum Home


582nd Signal Air Warning Battalion

by

My grandfather (L. B. Krauss) served during WWII for the 582nd SAW and spent about 2 years in Europe (Italy, France, Germany) from 1943-45. He passed away very young and long before I was born so I've always been curious about him. My grandmother and mom remember that he would never talk about what he did over there and always joked to them that all the guys "just played baseball the whole time", which we know really wasn't the case. I've been searching high and low for information on his unit and can't really find too much about them. Any information would be wonderful!

Dayna
dpalmer@ranchomurieta.org



Posted on Apr 19, 2007, 5:03 PM

Respond to this message

Goto Forum Home


WWII Signal Corp

by

Hello,

My father was a member of the 562nd and later the 582nd SAW Battalion during WWII. I believe there were some other names for his unit as well, maybe 2691st and 734th? He served in North Africa, landed on Pantelleria and continued on to Italy and France. He was a radar mechanic and I believe his military occupation number was 514. I do not recall how I came upon this site and your address. I had it bookmarked some time ago. I would be interested in comparing notes with you.

Sincerely,

Ms. Jody Labernik

Posted on Oct 24, 2005, 8:29 PM

Respond to this message

Goto Forum Home


ww2

by

in 1942 i went in the signal corp T was sent over seas, in the 554th signal air craft warning bn.i was a radar tec, i worked on units 270 & 271s. i was in aquador, galapagos islands & panama jungles. i got out of ww2 1945 on points. in oct. 1945. we only in a group of 30 men. we sent all of our info to panama & they intersepted them. i am 82 yrs old now & i get along good. its hard for me to type. charles b. imperio WV

Posted on Jan 6, 2007, 2:26 PM

Respond to this message

Goto Forum Home


562nd Signal A.W. Battalion

by

Hi,
I saw your message about your father being in the 562nd. My father was in that battalion as well. I've been trying to research what he did in WWII, but haven't had much success. My father passed away when I was a boy, 38 years ago, so I don't have a lot to go on. I wanted to ask if you've found any good websites regarding any kind of history of what the 562nd did in WWII. My father was listed as being in the headquarters company. I tried to get his military records from the National Archives, but they said the records had been destroyed back in 1973 in a fire. Any leads would be most appreciated.

Thanks

Duane Coon

Posted on Aug 25, 2007, 7:31 PM

Respond to this message

Goto Forum Home


Women's Air Raid Defense, Hawaii 1941-45

by


I am writing a book on the Women's Air Raid Defense, this was a group of
uniformed-civilian women who took over the Information Control Center at Fort Shafter,
Oahu, Hawaii. I have interviewed several of these women and have been able to ascertain
history, development, life styles of the WARDs but none has remembered the training to
become a radar plotter with any detail.

I have contacted Fort Shafter and any manuals or training modules of 1940 are long
gone. Can you direct me to or do you have information about the nitty-gritty of their
jobs?

For example, one of the WARDs told me she plotted her husband in from Midway and
knew that he had crashed. (He survived and went on to win the DFS.) When I asked her
how she knew it was Bill's plane, she replied, "He wasn't on the board anymore." But
she couldn't explain to me what that meant. "It wasn't my job to post on the board."

I've asked about the training, but they all remember the strange names for the
quadrants, and the military protocol, uniform-measuring, hearing tests, but that's it.
Those are significant details, but I still am not at the meat of what they did.

Could you please help me?

Dorothea Buckingham





Posted on Nov 4, 2002, 10:53 AM

Respond to this message

Goto Forum Home


Re: Women's Air Raid Defense, Hawaii 1941-45

by

My mother was a WARD in Hawaii, Geraldine Virginia Redlin. She was recruited in San Francisco. I found your message looking for information on the group, and wonder whether you have a contact address for a veterens' association.

thank you, Gene Olson

Posted on Dec 24, 2002, 7:00 PM

Respond to this message

Goto Forum Home


Women's Air Raid Defense, Hawaii 1941-45

by

Dorothea,

Have you read the book, 'Shuffleboard Pilots: The History of the Women's Air Raid Defense in Hawaii, 1941-1945'? If not, I would strongly recommend you get ahold of a copy. It contains a great deal of information about the WARDs and the air dfense system in Hawaii. If you want further details, you're welcome to contact me.

Posted on Jan 13, 2003, 10:09 AM

Respond to this message

Goto Forum Home


Re: Women's Air Raid Defense, Hawaii 1941-45

by

My grandmother was in the Women's Air Raid Defense on Hawaii during WW2. She remembers much from that time and I'm sure would love to help you with your book. If you are still working on this book and are interested please contact me at KayteeeD@aol.com. Good luck!

--Katie

Posted on Sep 27, 2003, 8:00 PM

Respond to this message

Goto Forum Home


Re: Re: Women's Air Raid Defense, Hawaii 1941-45

by

Is it possible that your grandmother was the very beautiful Katie Smith? I was with the Wards from Feb 43 until Oct 45

Posted on Oct 15, 2003, 1:44 PM

Respond to this message

Goto Forum Home


Re: Re: Re: Women's Air Raid Defense, Hawaii 1941-45

by Katie Dreisbach

I just read your response to my original message. No, my grandmother was the very beautiful Rita Cumming from California. Did you know her perhaps?

Posted on Apr 11, 2004, 8:01 PM

Respond to this message

Goto Forum Home


vet

by

no i did not know her, i was in radar around panama canal

Posted on Sep 3, 2009, 8:50 AM

Respond to this message

Goto Forum Home


Re: Women's Air Raid Defense, Hawaii 1941-45

by

I was with the Wards from Feb 1943 until about Oct 1945 after the war was over..Shuffleboard Pilots quotes me quite a bit...Very interested in hearing about the book.. Sad that we havent been officially recognized while some of us are still alive.

Posted on Oct 15, 2003, 1:41 PM

Respond to this message

Goto Forum Home


Ward Jane Riebeth

by

I have my grandmothers wing engraved on back Jane Riebeth..did you know her..or have any info about when she served in the Wards? Thanks.

Posted on Mar 21, 2008, 11:23 PM

Respond to this message

Goto Forum Home


Re: Women's Air Raid Defense, Hawaii 1941-45

by

I was with the Wards from Jan 1943 until the end of the war...what is your connection? Tanya

Posted on Feb 26, 2004, 9:07 PM

Respond to this message

Goto Forum Home


hi

by

just wanted to say hello....

Posted on May 3, 2004, 9:09 AM

Respond to this message

Goto Forum Home


WARDS

by

My mother was in the WARDS in Hawaii. Are you still looking for information?

Posted on May 15, 2004, 6:53 PM

Respond to this message

Goto Forum Home


Re: WARDS

by

What was your mothers name?

Posted on Jun 13, 2004, 9:52 PM

Respond to this message

Goto Forum Home


Radar at Fort Shafter

by

Have you finished your book? Im sure you must have the book published by the Arizona Memorial on the WARDS..I was a member from Feb. 1943-Sept. 1945. Was with the first group from the mainland.

Posted on Feb 26, 2005, 7:56 PM

Respond to this message

Goto Forum Home


Woman's air raid defence

by

My mom told me last night that she went with a group of woman by ship to Fort Shafter in Feb. of 42. Her maiden name was Lee Deutsch. She married my father a Marine officer while there. She is interested in learning more about others that were there. Thanks

Posted on Mar 20, 2006, 7:02 PM

Respond to this message

Goto Forum Home


radar air warning

by

in ww2, 554th signal aw bn. we had women working the big board (abig grid map) they were called S P A R S. they were 2,ooo miles away from us. they had a long pole & when we sent a target in , they pushed it out on the big map. it was up to the officers to intersept the target. charles b. imperio

Posted on Sep 19, 2006, 5:25 AM

Respond to this message

Goto Forum Home


My Friend was a WARD

by

My friend, Jane Sumpter, was a WARD and served at Fort Shafter from 1942 until after the war.

Jane does not have e-mail but I would be happy to print out your request and write up her response for you.

If you are still interested, please let me know.

Thank You.

Nancy Mitchell


Posted on Jul 7, 2007, 2:17 PM

Respond to this message

Goto Forum Home


ww2 radar

by

yo im from ireland and i need 2 know about radar development before and during ww2 for a history project any info would b greatly appreciated
thanx

Posted on Dec 10, 2002, 12:15 PM

Respond to this message

Goto Forum Home


Radar?

by Christy

Hey, I am very interested in how the radar was used and how valuable it was during WWII. Did many people rely on this to get valuable info? And did the radar in any way contribute to the win of WWII?

Posted on Jan 28, 2003, 4:40 PM

Respond to this message

Goto Forum Home


Radar in WWII

by Raymond C. Watson, Jr

If you really want to know the importance of radar in winning WWII, I suggest that you read the book "The Invention That Changed the World," by Robert Buderi. One of the reviewers wrote: "The boldness of the title is no exaggeration: indeed it could be lengthened to 'The Invention That Saved and Changed the World'."

Raymond C. Watson, Jr.
Consultant, Professor, and Historian

ray.watson@tbe.com

Posted on Nov 28, 2003, 3:51 PM

Respond to this message

Goto Forum Home


Radar in WWII

by

I have a copy of the book and it is very authentic. I taught Radar repair and mantenance during WWII aat a British radar school in Clinton Ontario, Canada, Lexington signal Depot, Avon Ky, and MIT Radar School at Boston, MA, In fact, I spent WWII teaching Radar. I was detached from MIT the day the war ended!

Posted on Jun 21, 2004, 3:00 PM

Respond to this message

Goto Forum Home


know my dad?

by

Did you know my dad col. George G. Getz. He worked with Bendex radio in the early installation of Radar and the training too? He is buried at Arlington now and I am always looking for people that knew him -that might share a story of him to me.

Posted on Aug 29, 2007, 7:59 AM

Respond to this message

Goto Forum Home


know my dad?my e-mail

by

Did you know my dad col. George G. Getz. He worked with Bendex radio in the early installation of Radar and the training too? He is buried at Arlington now and I am always looking for people that knew him -that might share a story of him to me.

Posted on Aug 29, 2007, 8:00 AM

Respond to this message

Goto Forum Home


Reply to "Know my Dad?"

by

No, sorry but I did not know him. Do you know if he went through the Eddy Test program?

Posted on Jan 23, 2008, 9:21 PM

Respond to this message

Goto Forum Home


Re: Reply to "Know my Dad?"

by Liz deviney

What is the EDDY test program?

Posted on Apr 16, 2008, 8:33 AM

Respond to this message

Goto Forum Home


The Eddy Test

by

If you want to know all about the Eddy Test and the Navy's Electronics Training Propgram of WWII, see my book Solving the Naval Radar Crisis (Trafford 2007), subtitled The Eddy Test -- Admission to the Most Challenging Training Program of World War II.

Posted on Sep 25, 2009, 2:37 PM

Respond to this message

Goto Forum Home


The Eddy Test

by

If you want to know all about the Eddy Test and the Navy's Electronics Training Propgram of WWII, see my book Solving the Naval Radar Crisis (Trafford 2007), subtitled The Eddy Test -- Admission to the Most Challenging Training Program of World War II.

Posted on Sep 25, 2009, 2:38 PM

Respond to this message

Goto Forum Home


Re: Reply to "Know my Dad?"

by Katherine

I know he cordinated the nato air defense system and shape tacan plan and was at Griffis Air Force Base. He talked Bendix Radio into taking on the Radar project. his career is outlined in the arlington national cemetary biography page under USAF COL. George Glen Getz and he was commander of GEEIA in 1965 i believe

Posted on Jul 8, 2008, 8:36 AM

Respond to this message

Goto Forum Home


Radar

by

Hello, I seen your response about to the fello looking for info for school. I'm an former Radar Tech that worked on the types that are found at the old Canadian Pintree Radar sites but are very interested in your point of view/knowledge on the different types that you worked on.

Cheers

Doug

Posted on Apr 24, 2003, 7:56 PM

Respond to this message

Goto Forum Home


WWII Radar

by

Can I get some info on WWII radar? If yes, email me at sabir_08@hotmail.com

Posted on May 4, 2004, 9:34 AM

Respond to this message

Goto Forum Home


WWII Radar

by

Can I get some info on WWII radar? If yes, email me at sabir_08@hotmail.com

Posted on May 4, 2004, 9:34 AM

Respond to this message

Goto Forum Home


RADAR WW2

by

I WAS A TECH ON A SCR 584 AND SCR 582xRADAR IN WW2 ITALY, SOUTHERN FRANCE N AFRICA SICICLY WORKED WIT ROYAL NAVY AND DESERT SIRFORCE BUT WAS PART OF 12TH AIR FORCE.

Posted on Jun 19, 2004, 3:41 PM

Respond to this message

Goto Forum Home


SCR 270 & SCR 271

by


I am most interested in the SCR 270 and the SCR 271 radar equipment. Details or photos would be greatly appreciated.

Many thanks.

Ren



Posted on Jun 14, 2004, 3:58 PM

Respond to this message

Goto Forum Home


veteran

by

1942 1945 I WORKED ON 270S & 271S.BUT IN WW2 WE COULD'NT MENTION RADAR. WE WERE 30 AT A STATION. I AM 82 YRS OLD NOW. BUT I CAN;T FAND NOTHING ABOUT 554TH SIGNAL AW BN ATTACHED TO THE 6TH ARMY AIR FORCE. CHARLES B. IMPERIO

Posted on Jul 30, 2006, 7:00 AM

Respond to this message

Goto Forum Home


radar air warning

by

i worked on 270s & 271 3 yrs in ww2. they were big ground units hid where they could;nt be seen. they had a range of 200 miles.the tubes in the transmiter where so big they were water cooled.in 1942 & 1943 WE HAD A LOT OF TROUBLE WITH GAS ENGINES TILL WE SWITCHED TO DIESEL. WHEN WE PICKED UP A TARGET WE INTERSEPTED WITH P 39S & P 4OS, WE A;SO HAD B 24 & B 17S & LB 30S. I WAS IN THE 554TH SIGNAL AW BN. ATTACHES TO THE ARMYS 6TH AIR FORCE. WE WORKED IN A UNIT OF 30 MEN. I WAS IN THE ATO. I WAS A RADAR OPERATOR,A PLOTER,RECORDER& radio opt. i could call a target in to our big information center 2,000 miles. our units picked up ships, subs &planes. the wires to our antena were 3/4 of a inch big. if you know what a spark gap is ,we had big ones. our antena was 50 ft. high & looked like a big bed springs.i am 82 yrs old now & i could talk about radar the rest of my life (thank god i was only blowed up once) i like email

Posted on Sep 16, 2006, 10:53 AM

Respond to this message

Goto Forum Home


Re: radar air warning

by Anonymous



Posted on Aug 29, 2009, 6:34 PM

Respond to this message

Goto Forum Home


Radars Cairo ww2

by

I am french. I have an old english friend, he is 84.
He served in Egypt during the war 2, repairing radars in the Cairo Citadel.
I am very much interested in that part of history but infortunatly my old friend can't remember much about this period of his life. Can somebody tell me something about the repairing of radars in Caro at that time 1942/1945.
Thank you very much.
Anne

Posted on Jun 30, 2004, 1:11 AM

Respond to this message

Goto Forum Home


Naval Radar Development

by


I am Research Officer at the Naval Historical Society of Australia and Editor of the Journal of Australian Naval History.

The October issue of the Journal will major on the introduction of radar into RAN service in WWII.

If you have any information you think may be of interest or you would like to submit a relevent story (purely for the glory!) please let me know!

In any case, please drop me a line or two about the subject.

Kind regards

Mike Dunne

Posted on Jan 29, 2006, 1:21 AM

Respond to this message

Goto Forum Home


italia & japanese radar in ww2

by

Dera friend,
I'm an italian old radio passionate who is going to collect information (for school porpose only) about some WW2 radar schematic (or block scematic).
I know italian Navy were equipped by EC3 (GUFO) type but unfortunately any simple schematic of that I nave in my hands.....
Similar for japanese radar..TYPE 11 or other.
Thak you in advance for you answer.
Fabio


Posted on Mar 19, 2006, 9:51 AM

Respond to this message

Goto Forum Home


WWII Radar

by

I am editor of the Journal of Australian Naval History. In October we are publishing a special edition majoring on the 'introduction of radar into the RAN'

I you would like to submit an article you may think will amaze and thrill our readers please do so....still lots of interesting stuff 'out there'

Our publication is 'academic' in its content and formatting and is intended to be a valid work for study by students and military historians alike.

Cheers!

Mike Dunne
Editor


Posted on Jun 13, 2006, 10:43 PM

Respond to this message

Goto Forum Home


my dad and bendex

by

DO you have or know my dad-COL. GEORGE G. GETZ?
My dad was involved in talking bendex into working with the usaf to install radar. His name is Col. George G. Getz. Did you know of him. I am always looking for others who might know him and can share stories. Please e-mail if you have info on him to my e-mail adress

Posted on Aug 29, 2007, 8:07 AM

Respond to this message

Goto Forum Home


tihi

by

The first country to actualy use the radar in ww2 was GB. Whit out it Germany would have ashived air supremesy over GB. If that didn't answer your question's you can write me back../jimmy

Posted on Sep 5, 2002, 4:40 AM

Respond to this message

Goto Forum Home


Radar in WWII

by

Send an E-mail to my dad (grampbob@hotmail.com)
He was on the minniapolis which (if I remember right) was the first warship to have radar on it. He was a Radarman.

He's got some good stories about surpizing the Japanese


Posted on Oct 2, 2002, 12:12 PM

Respond to this message

Goto Forum Home


Radar in WWII

by Dick Barrett

For a look at the British perspective have a look at the RAF Radar section of The Radar Pages at http://www.radarpages.co.uk, especialy CH, CHL, CHEL and GCI pages.

For the German perspective see Martin Hollmann's excelent site at http://www.radarworld.org

Regards,

Dick Barrett


Posted on Dec 9, 2002, 12:19 PM

Respond to this message

Goto Forum Home


Did you get the infor you needed?

by

I notice the message was pretty old but if you still need it I can give you models used by the Army signal corp early in the war and many of models used by the Navy with a littld about them.
George

Posted on Apr 13, 2004, 1:51 PM

Respond to this message

Goto Forum Home


radar

by

in ww2 i was in signal corp radar attached to army 6th army air force.i worked mostly on 270 &271 units. 1942 til 1945.the tubes in our transmitter were so big, they were water cooled. we could reach a enimy target 200 miles. & pull a interseption. we had p40s, p39s & p38s.all info was in code. we could call a target in 2,ooo miles.in 1942 we had gas motors to make power, they gave us a lot of trouble, but when we switche to diesel, they worked fine.. i was trained by older men , right in combat.most of our units were made in Baltimore MD, the greatest about our radar was the IFF. we could tell our planes from. the japs.radar saved the Panama canal. i am 82 yrs old now. in ww2 i was a good radar operator. radar is hard to explane. it transmitted & recieved at the same time.it was the beganing of television as we know it to-day.. it took 30 men to run a radar unit. we had to keep our units hid at all times.i an
m not a very good typer, my hands are stiff.. i wish we could meet face to face,& i could talk about ww2 radar & all that goes with it all day. charles b. imperio. WV

Posted on Aug 3, 2006, 9:47 AM

Respond to this message

Goto Forum Home


ww2 radar

by

ww2 1942 Till 1945. i worked on radar units 270 &271. we had a range of 200 miles.. i was in the signal corp attached to the armys 6th air force.

Posted on Aug 26, 2006, 2:07 PM

Respond to this message

Goto Forum Home


veteran

by

in ww2 i worked on radar 3 yrs. units 270s &271s. radar won the ww2. when i was on galapagos islands i could pick up a target & send it 2,000miles. we had women working for us in panama. they were called SPARS. they plotted & recorded & sent the interseptions to the enimy targets. excuse my mistakes , i am old.. the tubes were so big in the 270 & 271s they were water cooled.. charles b. imperio.

Posted on Aug 26, 2006, 2:17 PM

Respond to this message

Goto Forum Home


col. George Glen getz

by

DO you have or know my dad-COL. GEORGE G. GETZ?
My dad was involved in talking bendex into working with the usaf to install radar. His name is Col. George G. Getz. Did you know of him. I am always looking for others who might know him and can share stories. Please e-mail if you have info on him to my e-mail adress

Posted on Aug 29, 2007, 8:11 AM

Respond to this message

Goto Forum Home


radar

by

i was in ww2 . i was in radar over 3 yrs. i think Britan invented it. but the greatest about radar, was someone invented IFF, it kept from interseption our own planes.. charles b. imperio

Posted on Sep 15, 2006, 4:51 AM

Respond to this message

Goto Forum Home


radar in pembrokeshire

by

I am researching the history of the RAF radar stations in Pembrokeshire, West Wales, during the second world war and cold war and would be grateful for any pictures, stories or information. The ones I know of are RAF: Folly, Hayscastle Cross, Warren, St. Twynnells St. Davids, Kete, Strumble Head and Manorbier. Thanks Mike Bennett. email Mike21702170@yahoo.co.uk

Posted on Dec 7, 2007, 5:08 AM

Respond to this message

Goto Forum Home


Radar during WW2

by

My connection with Radar. (RAdio Detection And Ranging)
made up the name with the capital letters RADAR.
I started in 1943 in Tampa FL. with the original SCR 270.
This was a very limited unit, limited to only detection.
After training on the 270 for a year. It then had a set date POE E (Port Of Embarcation for Equipment) followed
closely with the POE P. P for personnel (which included me.) The design engineers had perfected Friend or Foe.
As the name indicates: Is it one of our planes flying into our area or is it one of the enemy? NO WAY will we send an obsolete Radar unit into the war zone. Then we saw
trucks arriving at Camp Murphy, FL with the parts for the new units with FOF. This happened again when Height
Finding was added for the Anti Aircraft boys to be ready
to shoot down the enemy. I started over three times.
As a result I was never sent overseas...the WAR ENDED !!.

Posted on Sep 24, 2009, 10:12 PM

Respond to this message

Goto Forum Home


veteran

by

i was in the 554th signal early aircraft warning 1941 til 1946 on radar stations 270s & 271s, attched to army 6th air force. would like to hear from some one, i am 85 yrs old now, charles b imperio

Posted on Sep 3, 2009, 8:39 AM

Respond to this message

Goto Forum Home

Obsolete Motorola HLE 6039A or HLE6039E Circuit Card Assys

by

Hi, Does anybody know what Motorola End Equipment by Part Number or Model Number that the HLE 6039A or HLE 6039E Circuit Card Assys are used on & where I might find a source of supply for Qtys of up to 5 ea? Motorola was no help, only to say that the parts are obsolete & discontinued. Thank you in advance for your assistance. Best Regards, Doug

Posted on Aug 16, 2009, 6:07 AM

Respond to this message

Goto Forum Home

bc191x model 24 volt.

by

hello to everyone from holland.
my name is peter, and i have in my radio room a transmitter : bc191x on the transmitter i read 24 volts.
i can not find any information about year of build , end i have no idea if this one is a american transmitter or from france.
the letters near the knobs are in english.
the metal aliminium color ( tube compartiment) and not yellow as the most france transmitters.
so my quistions are: when was my transmitter buid.
is it an 375 or 191 ( i read bc 191x on the model)
was my bc191x really used in the airplanes , or on the ground.
mybee will someone help me to get my information i will be very happy with it
is it possible to set me an mail to my mailbox with this information?
many thaks and i reply everybody,
my mail adres is: peter.kuut@gmail.com.

many thanks radio friends and hope to see in my box some mail.

Posted on Apr 1, 2009, 3:52 AM

Respond to this message

Goto Forum Home

Re: bc191x model 24 volt.

by Dallas

If the unit has power and output connectors also on the bottom of the set it is a BC 375.If it only has connectors on the side it is a BC 191.The BC 191w was used in vehicles while the BC 375 was for aircraft.

Dallas

Posted on Jul 24, 2009, 6:31 PM

Respond to this message

Goto Forum Home


H2S type 184 part needed

by

Hello,

I recently obtained a H2S unit and I would like to restore it visualy. Is there anybody who can help me for spares?? Many Thanks in advance. I have pics if required!!



Posted on Jul 12, 2009, 2:42 AM

Respond to this message

Goto Forum Home

T1154 wanted

by

We are looking for the T1154, in bed state even. Important is the panel.

Can anyone offer?.
We can offer German sets like EZ6, EK10, SK10 and spars.

Thanks

Posted on Dec 20, 2008, 12:02 PM

Respond to this message

Goto Forum Home

T1154

by

I have a few parts and whole T1154 in UK, where are you in the world and what exactly do you need this unit is not light so sending would be a problem, parts might be better. Let me know if you still need. I am looking for parts for an EZ6.

Posted on Jun 22, 2009, 6:32 PM

Respond to this message

Goto Forum Home


Bendix TA-12 Info Request

by

Does anyone have any info on a Bendix TA-12 such as technical specs and is it still available on the surplus market ?

Logan Mitchell Sr aka Logan.T.Mitchell.Sr@ssa.gov

Posted on Nov 11, 2002, 9:43 PM

Respond to this message

Goto Forum Home

Bendic ta12b

by

Hi there
I have a Bendix TA12B transmitter, in good working order, it puts out a good 80 watts into a dummy load. I also have a circuit diagram of the unit if it is of any help to you
Jeremy

Posted on Apr 17, 2003, 3:45 PM

Respond to this message

Goto Forum Home


Bendix receiver/transmitter info

by

Hello,
I also am looking for information on part of the Mosquito radio equipment. I have an RA-10DB and am looking any sort of service information, particularly a schematic. I would be very happy to pay for a good scan or photo-copy.
Thank you
John

Posted on Dec 26, 2003, 5:45 AM

Respond to this message

Goto Forum Home


TA-12 transmitter

by

Hi John,
I have in my collection one TA-12 in working condition as I use the TX for CW contacts. Is very good for ham purposes in my radioamateur station here in Brasil.
If I can help you with any information, ok.

Paulo - PY2-FAT

Posted on Mar 31, 2009, 3:15 PM

Respond to this message

Goto Forum Home


PART LIST TA12B

by

I AM LOOKING FOR THE PART LIST OF COMPONENTS OF TA 12B.
CAN YOU HELP ME?
REGARDS
I4VGG
GIULIANO ITALY

Posted on Jan 12, 2004, 9:01 AM

Respond to this message

Goto Forum Home


BC306A info

by

Can anybody tell me what the BC306A antenna tuning unit was used with and what one might be worth?

Thanks
Don k9muf

Posted on Mar 21, 2009, 1:43 PM

Respond to this message

Goto Forum Home

Uncle in the Signal Corps

by Docshock

Trying to find information on my Uncle. He was set to go into the Army early during WW2 but scored high on a math test. Was sent to San Diego as a member of the Signal Corp to work on RADAR equipment. After the war, he worked at Wright Patterson in Dayton. Is the any databases of people in the Signal Corps? Can't find any information on him joining the ARmy tho.

thanks

Posted on Mar 12, 2009, 5:05 PM

Respond to this message

Goto Forum Home

V-numbers wanted

by yankeegrunt

ok, got bored with k-numbers.
now its on to v-numbers
whos got one?
is there a real list out there?
I think the army still uses these so the list will probably be in the thousands
http://en.wikipedia.org/wiki/List_of_U.S._Signal_Corps_Vehicles#V-numbers
if you know some, jump in and post it
BB




Posted on Jan 27, 2009, 12:42 PM

Respond to this message

Goto Forum Home

Was the BC 191 - BC 375 a Lemon ?

by

Hello to all from Australia ,
I have a BC 191 here and A few people have said the set was a lemon , not very useable on the ham bands . Does anyone else have a opinion ? The set is a MOPA design using four 211 tubes . I believe the VFO 's in them were very unstable , they certainly are a weird design .

I know some hams did use them on air , but with modified VFO's . Does anyone have details of the mods ?

I plan to install the set in my 1/2 Ton Dodge Command car but need the 12V dynamotor and plugs etc. At least it will look great . The BC 312 is a nice rx , no problems there .

Thanks for any replies , Mike VK3CZ

Posted on Mar 30, 2002, 11:53 AM

Respond to this message

Goto Forum Home

BC375

by

You can find the entire manual on <http://www.kg7bz.com/manuals.html>;.
To change frequency you have to use different tuning units. You can also change some materials in the tuning box to get on your frequency.
All I know, it's a nice machine. I used him for transmitting on the medium wave (TU 5B tuning unit)

Good luck

Jopie

Posted on May 21, 2002, 2:39 PM

Respond to this message

Goto Forum Home


BC375 stability

by

You have probably had many answers by now. The BC375 was very unstable. Modulation ended up being a mixture of AM and FM, about 20 kc wide. That's the bad news. The FCC got after a few hams in the US for using them on the air.

Now the good news. AfterWW2 Air France installed thm on Connies for Atlantic runs. They had one good feature. On CW they didn't arc over at high altitudes The ART13 did that they used. I used to work in Maintenance for Lockheed.
73, Van

Posted on Nov 8, 2002, 5:31 PM

Respond to this message

Goto Forum Home


Re: BC375 stability

by William Donzelli

The BC-191 and -375 really do have a bad reputation. They actually do work fine on 75m if they are used properly and all of the rules in the manual are followed concerning the power supply and neutralization. If you cheat, you have troubles.

Posted on Nov 9, 2002, 9:45 PM

Respond to this message

Goto Forum Home


bc-375 lemon??

by

If you ever want to get rid of it, send up here to Washington state.
John
WA7PPF

Posted on Oct 22, 2003, 7:44 PM

Respond to this message

Goto Forum Home


Re: Was the BC 191 - BC 375 a Lemon ?

by

Are you interested in selling your bc 191 John Cowan

Posted on Oct 22, 2008, 7:05 PM

Respond to this message

Goto Forum Home


BC-191

by

HI,

I am a collector of old military radios and I am brazilian.
I have one BC-375 in my collection( the same as 191, but the 375 uses 28 volts) and is no good for ham use as the VFO is unstable and difficult to mantain QSO on AM.
I believe the ART-13 is better and stable...
My experiences with the BC-375 was not satisfactory.

Paulo PY2-FAT

Posted on Jan 19, 2009, 2:53 AM

Respond to this message

Goto Forum Home


wanted manual for a radio set by M.P. PEDERSEN

by

HI I NEED INFORMASION OR A MANUAL FOR A RADIO SET BY M.P.PEDERSEN MARINE RADIO TYPE B285C NO/60 .thanks ruben

Posted on Feb 19, 2006, 2:17 AM

Respond to this message

Goto Forum Home

Did you find a manual?

by

Hi Ruben,

I wonder if you ever found a manual? I will soon receive an M.P.Pedersen 285CVE receiver and am unsure whether it has a manual with it.

Best,

Clemens S.Ostergaard
Aarhus
DENMARK
clemenso@gmail.com

Posted on Jan 14, 2009, 5:27 AM

Respond to this message

Goto Forum Home


Re: Did you find a manual?

by

Hi Clements that would great if you did get a manual please let me know and we can come to some sort of arangemet to get a copy made. this is a great help to me.
Thanks Regards Ruben

Posted on Jan 16, 2009, 9:11 AM

Respond to this message

Goto Forum Home


WW2 Radio Equipment SNC-965 21 RCA 161988.88

by

Dear Sir I'd like to receive news and technical data end eventually some pics of the equipment in the message title. It is composed of 3 units, the two in the nessage Title and the following:

Wireless Set

SNC-63684RCA 107.127-202 19MK3 Supply Unit ZA 10572

AHT K.B. ZA 16214

PC 75108C

Made in Canada in 1944, RCA Victor Canadian Ltd.

Could you provide the more you can? An interesting issue:

The radio set has double markings and writings English and Russian, can you tell me the reason of the two languages?

I thank you in advance and hope to collaborate with you for the research

best regards

Peppe Arcangeli


Posted on Jan 3, 2009, 8:15 AM

Respond to this message

Goto Forum Home

Re: WW2 Radio Equipment SNC-965 21 RCA 161988.88

by Dallas

They have two languages because they were made in USA for Lend Lease to Britain and Russia.Few went to Russia because the US government knew that Russia would never pay for them.

Dallas

Posted on Jan 15, 2009, 4:00 PM

Respond to this message

Goto Forum Home


RCA AR80 Receiver

by

Does anyone have any info on the RCA AR80 Receiver? This looks a bit like a cross between the AR77 and AR88, and has external panel lamps.
Dave

Posted on May 25, 2005, 6:10 AM

Respond to this message

Goto Forum Home

RCA AR80

by

Hi Dave,
I have just bought an AR 80 Receiver from Telford Rally.It is very similar to an AR77.and works very well.There cant be many about as there is very little on the net
Im looking for circuit info also did you find anything.Did you try BAMA.
Best Regards Geoff

Posted on Oct 10, 2008, 2:11 PM

Respond to this message

Goto Forum Home


SCR-197 development date wanted

by yankeegrunt

anyone know what year the SCR-197 was issued?

thanks



Posted on Sep 2, 2008, 2:26 PM

Respond to this message

Goto Forum Home

k-numbers wanted

by

if anyone has a k-number list
for signal corps vehicles would love to hear from you.
if anybody knows a k-number speak up.

ei; k-51= chevy panal van/scr-299
k-52= ben hur trailer + pe-95
k-53= 2.5 ton van
k-54= 1.5 ton truck, stake bed antinna hauller
k-55= trailer 21' for fighter plotter station.
k-56= truck white 6 ton 4x4 24' scr-268
ect.

thanks
BB

Posted on Jan 17, 2008, 2:58 PM

Respond to this message

Goto Forum Home

list posted

by

http://cckw.org/forum/viewtopic.php?t=3047

the list so far.

Posted on Jan 19, 2008, 10:05 AM

Respond to this message

Goto Forum Home


here it is

by Mike

K-18 1 ½ ton 4x4 transmitter truck
K-19 receiver trailer
K-22 4 ton antenna trailer
K-28 4 ton antenna trailer
K-29 1 ton house trailer
K-30 4x4 5 ton Autocar van
K-31 4x4 5 ton Autocar van
K-32 4x4 5 ton tractor Autocar
K-33 1 ½ ton 4x4 stake & platform truck
K-34 trailer, power
K-35 telephone message center trailer
K-36 pole trailer
K-37 cable & pole trailer
K-38 splicer trailer
K-39 trailer
K-40 trailer
K-41 trailer
K-42 4x4 1 ½ ton telephone maintenance & construction truck wo/w
K-43 4x4 1 ½ ton telephone maintenance & construction truck w/w
K-44 4x4 1 ½ ton telephone earth boring truck
K-45 1 ½ ton photographic trailer
K-49 trailer
K-50 4x4 ¾ ton light maintenance & installation
K-51 panel van
K-52 1 ton trailer for PE-95 gen set
K-53 2 ½ ton 6x6 van truck
K-54 1 ½ ton 4x4 stake & platform truck
K-55 telephone central office trailer
K-56 6x6 van truck 6 ton White
K-57 2 ½ ton 6x6 van truck
K-58 trailer
K-59 2 ½ ton 6x6 van truck
K-60 2 ½ ton 6x6 van truck
K-61 2 ½ ton 6x6 van truck
K-62 5-6 ton 6x6 van truck
K-63 1 ton trailer PE-99 Gen set
K-65 1 ½ ton trailer
K-67 trailer
K-70 1 ½ ton 4x4 panel van
K-71 10 ton antenna trailer
K-72 trailer
K-75 10 ton large van trailer for SCR-545
K-76 trailer
K-77 trailer
K-78 13 ton large van trailer for SCR-584
K-83 trailer dolly

Posted on Jan 22, 2008, 12:25 PM

Respond to this message

Goto Forum Home


updated version posted

by

http://ww2dodge.com/w/index.php?title=K-list

on the dodge wiki

Posted on Feb 25, 2008, 3:32 PM

Respond to this message

Goto Forum Home


1st 11 K-numbers found

by brian in denver

posted new list on wikipedia

Posted on Sep 2, 2008, 2:23 PM

Respond to this message

Goto Forum Home


B S R U in WW2

by

I would welcome any information on R A F Base Station Radar Units
used as mobile radar stations on the continent of Europe after D Day
In particular any details of the B S R U that perished when the L S T 420
hit a mine off Ostend on the 7 Nov` 1944.
regards to all
pete h

Posted on Jun 20, 2007, 12:08 PM

Respond to this message

Goto Forum Home

B.S.R.U. in WW2.

by LESLIE LAWSON.

Dear Pete,
I have a relative who lost her husband on 7th Nov 1944, he was James Frederick Dines, Sergeant 746565 of the RAF Volunteer Reserve B.S.R.U unit, his ship hit a mine on that day in that area so it may well be the same ship. I would like to know more details of this event and the purpose of the B.S.R.U. unit at that time if possible. I can then pass any information on to his widow.

Look forward to your reply.

Regards Leslie Lawson.

*********************************************************

Posted on Oct 14, 2007, 2:32 AM

Respond to this message

Goto Forum Home


LST420

by

Greetings
My father also lost his life on LST 420 in 1944. He was F/O Henry Dennis Ebbs and there is a list of RAF personnel who were victims that day, on the website. I have been trying for some time to find out the purpose of that mission but so far have been unsuccesful. I would be grateful for any information.

Paul Ebbs

Posted on Nov 16, 2007, 11:02 PM

Respond to this message

Goto Forum Home


LST 420

by

Some details of the sinking of LST 420 are contained in "Ships Without Names" by Brian Macdermott ISBN 1-85409-126-3 published by Cassell 1992. My father was on LST 367 which drifted between the two halves of 420 and picked up some survivors - this was either brave or stupid by the skipper of 367 (Lt Comm Page) since this was in a howling gale and in the middle of a minefield !

Posted on Dec 13, 2007, 12:30 PM

Respond to this message

Goto Forum Home


LST 420

by

Just in case anyone is still interested - my father was one of the 26 ORs rescued from LST 420. He said in some memoirs that the RAF personnel formed a mobile radar unit sent to support the allied offensive in europe. They had developed radar, operated from the back of a "Bren gun carrier", to detect low flying aircraft and tanks. He was incorporated into a new unit and flown into Belgium a couple of weeks later.

Posted on Aug 27, 2008, 9:37 AM

Respond to this message

Goto Forum Home


TCS-12 manual and schematic

by

I make in to surplus any TCS-12 TX but are in to bad conditions. A good friend of mine promissed to repair...
I would be pleased any could help me out in sendig me the manual for the TCS-12/COL-52245. I know the longer pdf archive... perhaps the adobe professional make help for extract in to two or tree parts, I think..
Many thanks in advance
fred ea4kk


Posted on Aug 26, 2008, 1:49 AM

Respond to this message

Goto Forum Home

Radar No3 Mk2 GL

by

Has anyone any info or experiences with the WW2 No3 Mk2 AA radar trailer (also known as GL3B).
Mounted on a 6 wheel trailer and weighing 9.5 tons, has 2 48" parabolic reflectors on the roof.
Built from 1943 to 45 and used up to the late 50's by the British Army.

Posted on Aug 4, 2008, 11:41 AM

Respond to this message

Goto Forum Home

a (very) little on GL3C

by harvey

Alan (I think we have communicated before)
I cant offer you much except..
I have a pdf file I gathered somewhere which has a para or two on the Canadian use and export of the GL3C

REPORT NO. 73
HISTORICAL SECTION (G.S.)
ARMY HEADQUARTERS
14 Feb 55
A SURVEY OF ARMY RESEARCH AND DEVELOPMENT 1939-45

If this interests you
email me at
harvey at edwards dot net
and I will send it to you

and
my only notes say...
GL3
Two CV22 thyratrons were used to generate a 40A/25kV 1µs pulse at 400pps for the GL3 S-band radar.

and finally I once received from...
Fred J. Heath
At Royal Canadian Air Force, where I became the resident engineer at Research Enterprises in Toronto, where the Canadian government was manufacturing radar equipment basically to the British design: initially, the ASV equipment and also gunlaying equipment equipment that used two separate antennas, one for transmitting and one for receiving. They had operators who maintained the direction: one operator for vertical and the other for horizontal direction. It gave, I would imagine, about the same sort of performance as they had with the 584. This was the GL3-C I think they called it. And they said that without radar it took about 2,000 shells to bring an enemy plane down; with radar they could do it with about eight or ten. [Chuckling] They built about 660, I think, of those GL3-Cs and shipped them over to Britain and, I guess, to the continent.

sorry not much help
regards
harv


Posted on Aug 12, 2008, 4:46 AM

Respond to this message

Goto Forum Home


Alexanderson 200KW Alternator

by

I failed to mention in my previous post that the Alexanderson Alternator referred to was located inside an extinct volcano located near Kaneohe Hawaii. It sent morse code signals to submarines while they remained underwater as far away as Tokyo bay. All kinds of information about the base, the alternator and it's sky-high antenna can be found at: davewjessup.smugmug.com

Posted on Jul 31, 2008, 2:25 PM

Respond to this message

Goto Forum Home

John Galt McDonald

by

I am looking for any information on my uncle John Galt McDonald who served with the RAF volunteer reserve BSRU,his national service no was 1561130,his parents names were John and Peterina and was killed on 7th Nov 1944.Any info no matter how small would be appreciated.

Posted on Jul 24, 2008, 8:24 AM

Respond to this message

Goto Forum Home

info on signal corps generator model GN 39 G

by

I am looking for info about an Atlas Aircraft Products Corp.manufactured portable generator model GN 32 G powered by a Wisconson single cyl.gas engine.It has a wooden cover that hooks to the base of it to be able to be carried.and comes with plenty of spare parts.I also have the last shop tag telling about its last service.Any info as to its use and/or value would be appreciated.It runs very smoothly.
THANKS.

Posted on Jul 23, 2008, 8:15 PM

Respond to this message

Goto Forum Home

British Transmitter 5G

by

I'm looking for a the British Transmitter 5G working or not, all together or partial.

Posted on Jul 20, 2008, 10:25 AM

Respond to this message

Goto Forum Home

Find more forums on Amateur RadioCreate your own forum at Network54
 Copyright © 1999-2009 Network54. All rights reserved.   Terms of Use   Privacy Statement