Return to Index  

RE; "Maybe a curved lug pin will solve the problem."

November 26 2006 at 12:16 PM

WatchFan1  (Login WatchFan1)
PP Discussion Group

Response to GP's solution to protruding lugs


Thanks for the eadvice bigmin. I can see that it could help with GP.

Not sure about that on 5135 at all.

Curved lug pins help to eliminate the gap between strap and the case when the holes are FAR from the case.
This is not the problem here. In fact - the strap comes nicely and close to the case.
My problems are the 'horns' sticking out - because the holes are closer to the case. (strap needs to be thicker and FLAT on the top.

Plus...curved lug pins work OK with a regular round shape watch.
Here the case is flat - and I think it would actually look worse.

_See Rolex Wallpapers & Technical Data about most current Rolex models: HERE_

 Respond to this message   
 Copyright © 1999-2018 Network54. All rights reserved.   Terms of Use   Privacy Statement Home Page