(Login S4A490Q) ACSA Forum Users from IP address 196.15.143.151
-
I have a broken cable on the above from an 1990 500 SE. Anybody had any luck with having the steel cable
replaced by a brake\clutch cable manufacturer??
Or got a spare floating around in the garage.
Regards
Ryss
Cape Town
S4 (AAN)
A4 1.8
90 Q
Scoring disabled. You must be logged in to score posts.
What side r u looking for, normally the drivers side, i have fixed some of them with succes, but that was earlier when i did not mind sukkeling, see if there is a "Cableman" near u . They will be able to assist, the guy here in Bloem just became a bit rediculous with his prises, last one he did for me , he charged me R750, still better than the almost R2000 the dealer wants.
What i did was 2 buy a left front door megnism, then build it over to the right, there is a small mod u need to make, the fixture on the cable that hooks to the window need to be turned around, but what happens is, whilst the cable starts fading , it damages the little plastic wheel that it rolls up and down on, that is the imported part. If u replace the cable with a worn roller, it is not going to last, but that can also be used from the left side , if u can get one. They go for anything between R250-R500 used.
U have my number, give me a call if u want more info.
L8r
Albie
91 500 Turbo
Scoring disabled. You must be logged in to score posts.
