hi i have a 93 accord, with some jdm 1 pc headlights coming in in the next couple days

i want to do a nice hid retrofit, and i want to make sure i'm buying all the necessary things (aside from glue, etc.)

here's what i've come up with so far...

a6 projectors
hella ballasts
philips d2s bulbs
starter to ballast wire harness

pic of ballasts, bulbs, and harness:
http://www.hidconversionkits.com/hide

is there anything that i'm missing?
thanks for the help, i really appreciate it.

That would be the most expensive parts. In addition, a wire harness is needed. I would recommend making one as described in the faq.

alright well i guess that leads to my next question.

my current headlights use 9006 bulbs for low, and 9005 bulbs for high; when i intall the new jdm headlights, i will have H4 for low and H1 for high.

now what type of wiring harness should i be looking at - in order to hook up some a6 bi-xenon e-code projectors?

should i follow the directions for:

"How do I make my own low beam HID for Bi-xenon harness in a car that has quad ligths?"

OR

"How do I make my own low beam HID harness in a car with dual headlights?"

i'm thinking that it's for quad lights


Also if anyone has just bought a prebuilt harness... Where did you buy it from?

For simplicity, base it on the 9006, which is a quad lamp setup. There is not any premade for sale, simply because most cunsumers goes for bolt on mods. And projector HID retroes does not go in that category. Therefor quantities would be very low. The closest are 9006 harness for high power halogen bulb. Most of them are asian made with average quality. If you want OEM quality and looks, u have to custom make it.

Follow this link for a search:
http://search.yahoo.com/search?p=9006+harness+heavy&vm=i&n=20&fl=0&x=wrt

alright well that answers so much for me, thank you so much