September 3 2006 at 11:56 PM
No score for this post Anonymous (Login ohio1ton)
from IP address 207.69.136.197


Response to Re: Shazam's specs

--------------------------------------------------------------------------------

i came up with 873 peak tq and 1,125 peak hp that was filling in a few missing factors, which i may have been wrong at,,, on a new Dyno pro program !!!


So which factors where you missing ??


ShaZam

P.S. I like your numbers ...

intake

low rpm power limit?
high rpm power limit?
any added spacer height?


dizzy

reg or crank trigger?
initial timing?
total timing?
high speed retard?
mutiple spark?
voltage output?

carb

base size?
booster design?
cfm rating?

race fuel octane level?
electric fuel pump/ water pump etc?

cam advance or retard?

like i said i put in what i thought but may have been wrong on some,, the numbers i listed were on head port cc`s and valve size, i`ll try to enter your flow chart to see if it`s different

OK lets see if I can give you the numbers you need .

intake, Trick Flows New sytle


low rpm power limit? 3500
high rpm power limit? 8500
any added spacer height? No


dizzy MSD billet MSD 6AL Box

reg or crank trigger? Reg.
initial timing? 34
total timing? 34
high speed retard? none
mutiple spark? yes MSD 6AL
voltage output? 50,000

carb 1250 Dominator

base size? 4500
booster design? Annual
cfm rating? 1250

race fuel octane level? 114 Renagaed Racing Fuel
electric fuel pump 250 gph Holley Black Dominator
water pump Mezerie 55 gph remoto water pump.

cam advance or retard? Straight up.

hey Shazam , flow numbers loaded,, email sent!!!

Hey they look great and yes it feels just that good too ...


ShaZam