I'll start this out ....

My Name is Daniel G. Homa

My Pulling Truck is a 1978 Ford F350 4x4 I call ShaZam.
My other trucks are a 1989 F150 4x4 I use for dump runs and plowing the winter snow.
And my 2001 Crew Cab Super duty Diesel Grunt Truck.

I live in Wisconsin Where DA U.P. of Mich. meets Wis. on the Bay of Green Bay.

I'm a Foundry Worker By night and a Truck Puller From Memorial weekend to Labor day weekend during the Summer.

Last season I made it to 32 Pulls and Piled 6,000 Miles on my grunt truck. With the furthest pull being 300 mile one way and the closest pull only 20 miles one way.

I pull in 4 different clubs here and I finished pretty good in each club. NEW Club 1st in Super 2nd in Mod, WUMPA 4th in Super and 4th in Mod, but missed one pull due to conflict with a P.I. Pull, which I placed 6th In P.I. Missing the last 2 pulls due to conflict with the NEW clubs last pull. and then with SHOTO club I only made it to 4 of there pulls this last season due to all the other conflicting pulls on the schedule, but when I was there I was a threat.

My name is Doug Schwenn

I live in Hermosa,South Dakota(12 mi. from Mt.Rushmore)Land of NO TRUCK PULLS,NEVER WILL BE. I travel to Nebraska and Colorado to pull. Sometimes pull at antique tractor pulling events for exibition only


Telephone Technician for Mt. Rushmore Telephone Co. in Keystone, S.D.

I pull in the modified stock class Colorado Truck and Tractor Pullers Association.


My pulling truck is a 1961 Ford Uni-Body mounted on a 1972 F-250 4x4 chassis shortened 11" to fit the unibody. With a 460 and soon to be cobra-jet heads

My name is Tony Russell. I live in south central Kentucky and work in maintenance for the DANA corp.
My dad and I built Mr Chevy and have been running it since 1991, we built Xtreme Bowtie a couple of years ago.
We run both trucks with the Kentucky Outlaw Truck and Tractor Pullers Assoc., which I also take care of the website for. Check it out at http://kottpa.com/index.html

Mr Chevy 468 CI
Xtreme Bowtie 388 CI

Alright,

- Name...Adrian Flores
- Hometown...Valdez, CO (15 miles west of Trinidad, CO) (28 miles from Raton, NM).
- I'm an Automation/Measurement Technician for XTO Energy (Natural Gas Producer)
- Truck is...Frankenstein. 69' BOW-TIE w/D60 front 14-bolt rear and 454 BBC.
- I pull in the CTTPA's Modified Street class.
- I'm currently a ROOKIE with only 2 pulls under my belt. 3rd place twice. (BOUNCY)
- Will pull Modified street next year while saving to move into Pro-Stock.

Just in case we go to the same pull.....

This is me!!!!!!!

Have a Happy New Year......(Don't make fun of the Raiders either...1st round draft pick!!!)

my name is Tim Porter

Lewisburg, KY, southwest,ky originally from Boon, MI northwest corner of L.P.

I am a D.A.V. A certified KY school bus Driver Trainer, I sub drive, and work as mechaninc/welder/fab in off time, I do tech work, and announcing at truck and tractor pulls, i also do websites and misc other computer tach stuff.

I first got intersted in trucks , in Mi where i went to a pull and watched a then unknown guy named Bob, drive his 79 ford truck over a bunch of cars crushing them, the trucks name was bigffot, and it was one of its first public outings, and if not, its first major one, as the truck was swarmed with excited people. For then on it was all about the fwd's when everyone else was going chevelle nova down the road, i was in a fwd. I have been around pulls ever since, even when i was overseas.

For the last ten years I have been involved with NTPA/midsouth pullers, working on prostocks, silver bullet II and Eliminator, and a few years ago i was asked to help start the KenTen pullers.

My name is Lee Benson. Im from Hollister,CA . Its about 45 miles south of San Jose,ca-25 miles east of the Monterey Bay.
Some may know Hollister from Fourwheeler magazine. Its where they hold the Top Truck Challenge. We have a very nice offroad 4x4 and Motorcycle park

I do not own a pulling truck. I do work alot on my Brother In Law's truck. I helped him build it this last year and its the first dedicated pull truck either of us have built or been around. Its his truck and Im the "bucket bitch" (Term used when we used to show horses. Kinda like a crewmember but not as glamorous)

The truck is a 79 Chevy D60/14bolt with a 468 . We run in whats called the 5500lb street modified class. Truck did well but we are still sorting it out..Took 8th out of 32 and 8th out of 24 at the larger pulls this year. Took 10th out of 18 when going head to head against the next class up the 6000lb super stock class being down 500 lbs and not having a solid suspension.

My current toy is a 71 Toyota Landcruiser FJ40 that I built-It has a SBC 350/Th350/Dana60 front/ 14 bolt rear/ Hydraulic steering/ Detroit lockers/ 5:13s and 42" SuperSwampers.

Grew up in the family's auto repair shop. Learned alot and enjoy working on cars/trucks for fun..not day in and day out. Im in sales and work for Milgard Windows. We manufacture residential windows for houses and such.

Hello. My name is Bedford Sharp.
I pull a '79 F-350 in a 6200lb Street Class. We pull in Virginia and West Virginia. I go to about 7 pulls a year but have missed a few due to repairing or sorting out problems. I have run the truck this go round for the last three years. Several years ago I ran the truck when you could bolt on a few things, drive it on the road and still be very competive. Unlike now the truck is a dedicated pulling truck. I started pulling again for some family fun and something we could all share in. I have a little guy who is 5 years old and he can't get enough of seeing the trucks.
We usually have a large field of trucks. The picture I wanted to post was at a fair pull. That I came in 5th out of 46 trucks. But I can't get it loaded.
I work at a textile print shop where we print household floor mats and carpet. I am a supervisor for the Prepress/Printing dept.
I'll try tonight again to figure out how to get my pic. loaded.

- Name... Chris Vanatta
- Hometown... Glenwood, IA (about 20 miles South of Omaha, NE)
- I'm a Network Administrator
- Truck is a 1979 Ford F250 called YES DEERE...
- I pull with the Nebraska Power Pullers (NPPA www.nepowerpullers.com )in the 2wd Street Modified class.
- My buddy and I built the truck in a few months time last year and ran in 5 pulls last year.
- Hope to build a new motor this year and pull more competitively.

Well, my name is Alan Page and I hail from North Central Indiana. I currently have 3 trucks. My 1990 F250 pulling truck, my 1996 F150 that my daughter claims, and a 2006 Dodge Quad cab 4x4 cummins powered truck to haul my puller around. I am a network administrator for Tinnerman Palnut. I started pulling when I was 16 with my uncles stock tractors (John Deere of course) but finally relented to the truck pulling bug 2 years ago. Currently run with Indiana Truck Pullers Association.

Here's a link to my website and also few pictures.
http://mysite.verizon.net/resrf505/

My name is Chris H.
Im am a student at southeast com college in Milford Ne. Major in John Deere construction and forestry tech.
here is my 1967 Gmc
it is a Colorado Street Mod or will be anyway

Your truck has the hood of a 69-72. Very nice though...

True, true. very nice though. Then again, the hood is interchangable if you change fenders and all.
Who knows what could happen in fourty years.

The body looks better than Frankenstein's. I chose the name Frankenstein because my truck is composed of MANY different Chevy's.

- 72' 2wd 3/4 ton body
- 69' 4x4 3/4 frame/grille
- 77' D60 front axle
- 80' trans/t-case/drivelines/rear
- 69' 396 SS heads
- ???? (70') 4-bolt block.

Here's some good info for you....


http://www.akfabshop.com/alaskaoffroad/axle_tech.htm

yep
the grille is a 69 from what i was told to bad nobody noticed the chev tailgate though

keep the Eaton????????? or do you want to trade for a Corp-14????????? Remember, I either have it, or can get it, cheaper than E-bay!!!!!!!!

im gonna keep it this summer then i might move to the 14 bolt next fall