<< Previous Topic | Next Topic >>Return to Index  

bret?

March 24 2007 at 11:00 AM		Anonymous  (no login)
from IP address 64.33.244.143
what do you think of the 1.8 rocker arms? would you use them?

 
 Respond to this message   
AuthorReply


(Login TRUKPULR)
Reddog's Friends
72.129.214.237

Well Digger

March 24 2007, 12:35 PM 

Like I had said earlier.. if you need the added Valve lift then go with the 1.8 .. otherwise the 1.73 works OK for most application.

ShaZam


 
 
Anonymous
(no login)
64.33.244.143

Re: bret?

March 24 2007, 2:50 PM 

but how come you have a set and don't use them?

 
 


(Login TRUKPULR)
Reddog's Friends
72.129.214.237

Re: bret?

March 24 2007, 5:41 PM 

When I put them on my engine the geometry was wrong




 
 
Bret Powell
(Login PullinBret)
162.40.156.156

Re: bret?

March 24 2007, 8:15 PM 

I use T&D 1.8s on the intake and 1.75s on the exhaust. I will always use a higher ratio if I have the option and the cam is right.

Bret

PFC Engines
DTS Dyno and SuperFlow SF600 equipped!

"Pullin For Christ"








    
This message has been edited by PullinBret from IP address 162.40.156.156 on Mar 24, 2007 8:17 PM


 
 
Current Topic - bret?  Respond to this message   
  << Previous Topic | Next Topic >>Return to Index  

Pullers