<< Previous Topic | Next Topic >>Return to Index  

Tire pressure

June 4 2007 at 1:16 PM
Alan  (no login)
from IP address 65.240.34.1

Tire pressure seems to be a closely guarded secret in my neck of the woods. What is the general concensus on here? Max out the back, and run 20-30 in the front? Or, do you run less than max in the back as well?

 
 Respond to this message   
AuthorReply


(Login TRUKPULR)
Reddog's Friends
72.129.214.237

Re: Tire pressure

June 4 2007, 3:09 PM 

I have found that for ShaZam the best tire pressures are 28 back 12 front. The most I ever run in the backs was 32.

 
 
xtreme872
(no login)
208.32.149.80

Re: Tire pressure

June 4 2007, 8:16 PM 

What kind of tires are you running.

 
 
1 Draggin
(no login)
12.168.119.230

Tweaking

June 5 2007, 5:45 AM 

Alan I see alot of guys run their tires as low as possible on the fronts and still keep the tire on the rim. When the truck starts its run most of the weight comes off of them anyhow. The back I would think needs to be about maxed out so you wouldn't lose hitch height because the tire was squashed down.
Some tires have stiffer side walls then others so I think you need to test yours some.
Just my 2 cents. I'm sure everyone has their own thoughts.

 
 
Alan
(no login)
65.240.34.1

re

June 5 2007, 7:35 AM 

I had a sponsor provide a set of BFG AT's at cost, so I'm going to run them this year.

 
 

(Login PullinBret)
71.29.6.36

Re: Tire pressure

June 5 2007, 9:35 PM 

50ish rear, 18-22 front.

PFC Engines
DTS Dyno and SuperFlow SF600 equipped!

"Pullin For Christ"







 
 
Current Topic - Tire pressure  Respond to this message   
  << Previous Topic | Next Topic >>Return to Index  

Pullers