|
465 cut gearMarch 10 2013 at 7:28 AM | Anonymous (Login 77chevy) from IP address 98.223.250.238 |
| looking for a trans with a cut gear to run a 4.88 or 5.13 setup. Are the profab single gears the way to go or is there someone else that makes them |
|
Author | Reply |
Anonymous (Login blue470) 174.242.192.48 | Re: 465 cut gear | March 14 2013, 1:41 AM |
there is a guy on here from pa. his name is corey. i think he is making some. |
|
Robert Hanshaw (Login rhanshaw) 70.199.97.30 | Re: 465 cut gear | March 14 2013, 8:40 AM |
I run 5.13s and run a #4 profab headset |
|
Cory (Login fordman300) 174.236.160.5 | Re: 465 cut gear | March 15 2013, 9:19 AM |
I make SM465 3rd cut third gears in the following ratios 3.039, 3.171, 3.27, and 3.422ratios. The gears are $650 a set and all are in stock.
What are you looking for for an overall ratio.
Thanks
Cory Keck
Kecks machine
7246998820 |
|
Anonymous (Login 77chevy) 98.223.250.238 | Re: 465 cut gear | March 15 2013, 9:49 PM |
looking to run 5.13 or 5.38 so a gear around 2.7 |
|
Cory (Login fordman300) 50.192.0.137 | Re: 465 cut gear | March 16 2013, 9:07 AM |
I will look into it and let you know if that is possible .
Thanks
Cory |
|
Cory (Login fordman300) 160.212.108.1 | Re: 465 cut gear | March 18 2013, 9:00 AM |
Ok you have a couple of options
1. Cut 3rd with a ratio of 2.73
2. Replace the headset with a 19.5% over and use a 3.422 cut third to net
2nd gear 2.88
3rd gear 2.76
3. Replace the headset with a 19.5% over and use a 3.274 cut third to net
2nd gear 2.88
3rd gear 2.64
4. Replace the headset with a 21.7% over and use a 3.422 cut third to net
2nd gear 2.80
3rd gear 2.68
5. Replace the headset with a 21.7% over and use a 3.274 cut third to net
2nd gear 2.80
3rd gear 2.56
Call me in the evenings or text me to discuss further
Thanks
Cory
Keck's Machine and Performance design
(724)699-8820 |
|
Anonymous (Login lemonpeeler) 66.141.252.165 | different ratio | March 19 2013, 4:46 PM |
What can you offer in a 25. to 26.5 range with 5.13-5.38
gear set up.
the 2.56 would get the 26.1 ratio w 5.13
what other combo would you have?
Price would be great.
you can pm also.
how do i figure the headset with a 3.26 gear?
I have a profab in that ratio.
Is it compatable?
This message has been edited by lemonpeeler from IP address 66.141.252.165 on Mar 19, 2013 4:51 PM |
|
|
Cory (Login fordman300) 160.212.108.1 | more options | March 20 2013, 7:46 AM |
Your current 3.26 gear is compatible. 3.26 and 3.274 are only .5% apart so the difference is minimal
6. Replace the headset with a 29.9% over and use a 3.422 cut third to net
2nd gear 2.51 (26.48 with 5.38)
3rd gear 2.40 (25.31 with 5.38)
7. Replace the headset with a 29.9% over and use your 3.26 cut third to net
2nd gear 2.51 (26.48 with 5.38)
3rd gear 2.30 (24.11 with 5.38)
What is your email and I can give you prices.
Thanks
Cory
Keck's Machine and Performance design
(724)699-8820
This message has been edited by fordman300 from IP address 160.212.108.1 on Mar 20, 2013 7:49 AM |
| |
|
| |
|