<< Previous Topic | Next Topic >>Return to Index  

Gluing windows

February 19 2009 at 2:03 PM		   (Login CameronForester)
HyperScale Forums
from IP address 70.247.242.133
I have been using Elmer's glue for gluing clear parts for a couple of years now and have been telling myself for most of that time that I need to find a better glue. After a recent fight with Tamiya's Ferrari 360 Modena, that time has come.

Elmer's glue will not hold the windows and allow me to put the body on. On cars that I have successfully completed with Elmer's glue on the windows, lights, etc. I easily knock them off. What kind of glue will hold well and not mess up the windows.

 
 Respond to this message   
AuthorReply

(no login)
74.215.157.58

Try this

February 19 2009, 3:05 PM 

This glue works really well.HTH Mark
http://www.gatorsmask.com/gatorglueorder.html

 
 Respond to this message   

(Login CameronForester)
HyperScale Forums
70.247.242.133

I'll give it a shot

February 20 2009, 1:46 PM 

I'll be sure to pick up some next time I go to Mid-South Hobbies. Thanks for the suggestion.

 
 Respond to this message   
Joe
(no login)
205.188.116.131

or you could try this.......

March 1 2009, 8:33 AM 

I found a watch crystal glue, at Hobby Lobby, with a pin point applicator. About $4 with their on line coupon.

 
 Respond to this message   


(Login Jinrai1)
HyperScale Forums
196.207.47.60

I use Tamiya clear acrylic paint or Humbrol Crystal Clear glue n/t

February 22 2009, 11:12 PM 

n/t

 
 Respond to this message   
Current Topic - Gluing windows
  << Previous Topic | Next Topic >>Return to Index  

Please note a few points of etiquette. First, would all contributors please use their real name and/or their actual e-mail address. All contributions are welcome but please refrain from political or abusive comments. These posts will promptly be removed from the server.

In addition, Car Chat is not a forum for the public criticism of the models that appear as Galleries or Articles. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.