Return to Index  

54mm is closest to 1/32nd

March 31 2007 at 9:39 AM
  (Login Wyverns4)
from IP address 67.161.149.23


Response to Is 54 mm close to 1/35?
http://www.coloradominiatures.com/index.asp?PageAction=Custom&ID=4

Check out the above page. According to it, 54mm = 1/31 scale. However, my beleif is that 1/35, 1/32, and 54mm are interchangeable. You'd be hard pressed to see any difference between them. 54mm is the figure model standard and 1/35th is the armor model standard. 1/32 is the aircraft standard.

HTH

Rick

"Life is tough. Its tougher when you're stupid!"
John Wayne
Semper Fi!

 
 Respond to this message   

Please note a few points of etiquette. First, would all contributors please use their real name and/or their actual e-mail address. All contributions are welcome but please refrain from political or abusive comments. These posts will promptly be removed from the server.

In addition, Figuratively Speaking is not a forum for the public criticism of the models that appear as Galleries or Articles. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.