<< Previous Topic | Next Topic >>Return to Index  

warriors 1/9 sherman tanker Instructions

April 6 2009 at 7:08 PM		   (Login experten)
from IP address 76.233.174.220
Hi All,

OK. I got the kit on ebay, and now I need the instructions. The kit didn't come with any, and there are a few bits and bobs that I can't place. Does anyone have a set they can scan?

Thanks!

Mark

 
 Respond to this message   
AuthorReply
Tim
(Login riceballtrp)
74.166.24.99

Instructions

April 10 2009, 6:38 PM 

The kit did not come with any. Sorry.

 
 Respond to this message   

(no login)
75.43.37.95

Which parts?

April 12 2009, 11:00 AM 

There aren't that many, so if you describe them I can probably help. The .50 cal. has the most parts and if you look at any of the numerous AFV references, or online you should get a good idea. Add some chain and pins and the gun doesn't look too bad. The ammo box is simplified, so a little scratch building really helps that. I used large brass rod for the hatch hinge and should have added the periscope mount.

 
 Respond to this message   
Current Topic - warriors 1/9 sherman tanker Instructions
  << Previous Topic | Next Topic >>Return to Index  

Please note a few points of etiquette. First, would all contributors please use their real name and/or their actual e-mail address. All contributions are welcome but please refrain from political or abusive comments. These posts will promptly be removed from the server.

In addition, Figuratively Speaking is not a forum for the public criticism of the models that appear as Galleries or Articles. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.