2) What glue and putty will work on a vinyl kit? I tried, Tenax, Plastruct, Methyl Ethyl Ketone, Tamiya, 5 minute Epoxy, Testors and Lacquer Thinner to see if it would work. What's left? Cyano?
The thicker Cyano to put the joints together and then blue putty with mr surfacer as a primer.For fine seams I used crazy glue and just flowed it into the joint. Just be sure you clean the vinyl with good soapy water to clean all oils of of it before assembling.
Please note a few points of etiquette. First, would all contributors please use their real name and/or their actual e-mail address. All contributions are welcome but please refrain from political or abusive comments. These posts will promptly be removed from the server.
In addition, Figuratively Speaking is not a forum for the public criticism of the models that appear as Galleries or Articles. Please make any suggestions for improvements or criticism direct to the author via the email link at the bottom of the Article.