I am not sure what truck you have, but if it has pressed in studs with splines to keep it from turning in the drum, you could try Loctite but it may not work if it has spun in the drum. I would have no problem putting a small tack weld on the inside to hold the stud in place, as long as the stud looked good with good threads. New studs can be bought through Dorman if you need to go that way. Depending on the size, I bought all new studs for my Jeep CJ2A for $40.
Posted on Jul 28, 2011, 1:41 PM from IP address 22.214.171.124