I went out this morning and squirted one shot of Gunk silicone spray into the cable hole in the back of the speedo, Ted I did not know that the little "cup" was there. After I got my clutch assembly and trans back in around noon I took the truck for a drive of about 5 miles and the speedo was very quite with no jerking. Ted I would like the name of the lube from NAPA if it's no trouble.
By the way no more slipping clutch.
Just went out and took a look at the little cup and put a drop of 3-in-1 in it. Will try and get the lube that Ted recommends and use that.
Thanks Again Everyone for your response. Jim B.
Posted on Aug 16, 2012, 8:09 PM from IP address 126.96.36.199