STUDEBAKER TRUCK TALK

A forum for any messages related to Studebaker Trucks

View all messages

Interesting way to go. on Jan 15, 2013

dash. vern on Jan 15, 2013

Yep, they missed the mark.... on Jan 15, 2013

Starting Bid. Chris on Jan 15, 2013
gauges. Jeff Jones (the Tucson one) on Jan 15, 2013

Fuel Pump. on Jan 15, 2013

Have seen. 62champ on Jan 15, 2013
Leak. Fred on Jan 16, 2013

I ment to say brake cleaner. Fred on Jan 16, 2013

Good points guys!. on Jan 16, 2013

Re: Good points guys!. on Jan 16, 2013

Help on switch by throttle linkage. on Jan 15, 2013

Re: Help on switch by throttle linkage. GS on Jan 15, 2013
Re: Help on switch by throttle linkage. Ted on Jan 15, 2013
Don't know about the rest of you guys, but. on Jan 16, 2013

Radial tire on 3/4 ton split rims. Bill on Jan 15, 2013

radials on split rims. vern on Jan 15, 2013
Only for thirty years. on Jan 16, 2013

Radial Tires 3/4 ton. Bill on Jan 16, 2013

Re: Radial Tires 3/4 ton. TED on Jan 16, 2013

Flaps?. Beth Marler on Jan 16, 2013

It is the rubber liner put inside the wheel to protect the tube. MW on Jan 17, 2013
Re: Flaps?. Zane on Jan 17, 2013

I put a set of new bias on mine 10 years ago. MW on Jan 16, 2013

Tires. Bill on Jan 16, 2013

Re: Tires. Ted on Jan 16, 2013

I run 215X85X16 on my champ. Peter Jackson on Jan 17, 2013

Tires 215x85x16. Bill on Jan 17, 2013

Radial tire on lock ring rims. Anonymous on Jan 17, 2013

Saw this on the HAMB -M5. on Jan 15, 2013

Vern, that's only ~250 miles!. on Jan 16, 2013

Radio delete. on Jan 16, 2013

I wish him the best of luck. vern on Jan 16, 2013
I'd say about $100 too high to start with.. MW on Jan 16, 2013
I think there is a bit more to a. on Jan 16, 2013
Cheaper to add the radio!. Bob W on Jan 16, 2013

The seller is guessing.. HHD on Jan 16, 2013

plate. vern on Jan 16, 2013

ebay. vern on Jan 16, 2013

Vern Ediger. on Jan 16, 2013

STUPID PUTORS. tom on Jan 16, 2013

yes dear. vern on Jan 16, 2013

Idiot blew a stop sign, now dads truck is wrecked, we need parts. on Jan 16, 2013

1950-53 is what we need. on Jan 16, 2013

Guess someone should ask--1950-53 what?. Anonymous on Jan 16, 2013
wreck. vern on Jan 16, 2013

Northern NY. on Jan 16, 2013

Anybody going to york that might have or know of some.. george o on Jan 17, 2013

George O You asked a question but never finished it?. Peter on Jan 17, 2013

Did I miss something?. Brian Dahl on Jan 16, 2013

there was some. on Jan 16, 2013

pickup(s) tonight - almost now!!. Chris on Jan 16, 2013

Just sold. Chris on Jan 16, 2013

OD Cable Location on Dash. on Jan 16, 2013

OD location. 2R5 on Jan 16, 2013

Thanks !. Rhys on Jan 16, 2013

OD location. 2R5 on Jan 16, 2013

much to clean!!. on Jan 16, 2013
Wow!. Rhys on Jan 16, 2013
OD. vern on Jan 16, 2013

Aren't they supposed to look like this?. Lee W. on Jan 16, 2013

LOL!!!!!!!. ChicoDave on Jan 16, 2013
thats more like it. vern on Jan 16, 2013

Or you could have the real mouse nest!. Zane on Jan 17, 2013

Mouse-nest.... on Jan 17, 2013

globe. vern on Jan 17, 2013
Yup! What Vern said!. Zane on Jan 18, 2013

Beautiful truck !. on Jan 16, 2013

shorter throw for brake pedal Help!!. on Jan 16, 2013

clutch. vern on Jan 16, 2013
Re: shorter throw for brake pedal Help!!. Skip Lackie on Jan 16, 2013
getting old. vern on Jan 16, 2013
Hand operated controls. on Jan 16, 2013
I would think you could cut an inch and half off. ChicoDave on Jan 16, 2013
Re: shorter throw for brake pedal Help!!. Zane on Jan 17, 2013

Re: shorter throw for brake pedal Help!!. Zane on Jan 17, 2013

dual master cylinder. Randy Wilkin on Jan 20, 2013

clutch pedal. on Jan 18, 2013

Rear Main Seal. on Jan 16, 2013

seal. vern on Jan 16, 2013

Thanks, Vern. on Jan 16, 2013

WooHoo - fenders. Chris on Jan 16, 2013

Post up some pictures when you have time!. Bruce Stieve on Jan 17, 2013

You wouldn't happen to have a spare outside door handle layin around would ya?. Bruce Stieve on Jan 17, 2013
probably do... :-). Chris on Jan 17, 2013
fenders. Chris on Jan 17, 2013

Fenders. on Jan 18, 2013

So do you think. Keith Mifflin on Jan 18, 2013

vibration. Chris on Jan 18, 2013

I do not have the curved rod at the bottom of the fender...... Bruce Stieve on Jan 21, 2013

me neither. Chris on Jan 22, 2013

So have you worked out a way to do this?. Keith Mifflin on Jan 21, 2013

fender bracing. Chris on Jan 22, 2013

Classified. ldj on Jan 16, 2013

posting photos on behalf of Robert. Judy on Jan 16, 2013

Exact same spot light on craigslist #3485658476 ,. Jeff S. on Jan 16, 2013
Thanks Judy. Rob on Jan 16, 2013

Kansas and Missouri, posting M series trucks.. Jeff S. on Jan 16, 2013

One-ton was Iola, KS Studebaker dealers service truck.. 2R'51 on Jan 18, 2013

has any one ever. tom on Jan 17, 2013

I type in fatfenderrelics.com and I get Website suggestions?. Bo on Jan 17, 2013

Bo, I got that also, THEN. Brian Dahl on Jan 17, 2013

www.fatfenderedrelics.com. on Jan 17, 2013

Stupid Putor can't spell rite. Tom on Jan 17, 2013

Studebaker stuff looks really decent. Worth? Trip to............ Bo on Jan 17, 2013

The one decent looking gray R series truck. Keith Mifflin on Jan 18, 2013

At least I'll be able to get out!. Brian Dahl on Jan 17, 2013

snow. vern on Jan 17, 2013

Vern, we can spare a few million gallons of "rain"!. Brian Dahl on Jan 17, 2013

Yeah, after five days.... Frank Drumheller on Jan 17, 2013

I'm waiting for you to send it. vern on Jan 18, 2013

It's in the mail!. Brian Dahl on Jan 18, 2013

Man I spent a bunch of time there in Wichita. Keith Mifflin on Jan 18, 2013

Re: At least I'll be able to get out!. Brian Dahl on Jan 18, 2013

Not one flake of.... Frank Drumheller on Jan 18, 2013
Not one flake of.... Frank Drumheller on Jan 18, 2013

Well, I did it!. Brian Dahl on Jan 18, 2013

We didn't get any snow but. Anonymous on Jan 18, 2013

Ooooooops..... on Jan 18, 2013

Wheel question. Brian Dahl on Jan 18, 2013

I don't have a lead for you but. on Jan 18, 2013

Good points John, definately something to consider.. Brian Dahl on Jan 18, 2013

That is what I've done with my wheels. Frank from Germany on Jan 18, 2013

NICE Frank!. Brian Dahl on Jan 18, 2013

Thanks Brian. Frank from Germany on Jan 18, 2013

You definately got done what you set out to do!. Brian Dahl on Jan 18, 2013

Wheels. on Jan 18, 2013

Rick. Frank from Germany on Jan 18, 2013

LAW?. on Jan 18, 2013

Neal. Brian Dahl on Jan 18, 2013

wheels. vern on Jan 18, 2013
Brian - Thought you were selling your truck ?. Dan Martin on Jan 18, 2013

Dan--Check out my post on Jan 13.. Brian Dahl on Jan 18, 2013

Good news! can't find which 1/13 post..... dan martin on Jan 18, 2013

Dan, it's now on Page 2.. Brian Dahl on Jan 18, 2013

Custom Wheels. on Jan 18, 2013

Truckdog62563. Brian Dahl on Jan 18, 2013
Federal Highway Regs. Skip Lackie on Jan 19, 2013

Widowmakers. Trucksog62563 on Jan 19, 2013

Clarifying which style is the true "widow-maker".... on Jan 19, 2013

Storage Box Install. on Jan 18, 2013

I want one!. Brian Dahl on Jan 18, 2013
YTour truck keeps getting cooler and cooler!. Bruce Stieve on Jan 18, 2013
Now I can move. on Jan 18, 2013

John, that "Studebaker Badge" will be the final touch. Brian Dahl on Jan 18, 2013

Looks good!. on Jan 18, 2013

Nice! Did you bolt it down?. on Jan 18, 2013

Box is bolted down.. Randy wilkin on Jan 18, 2013

Nice design!. on Jan 19, 2013
Box Info. on Jan 20, 2013

My entire bed. on Jan 20, 2013

Great Truck. Robert Sutherland on Jan 19, 2013

John and Randy. Randy Belgum on Jan 19, 2013

Sources for front/rear glass rubber seal. Brian Dahl on Jan 18, 2013

SP. on Jan 18, 2013
A word of caution. on Jan 18, 2013

Good point John.. Brian Dahl on Jan 18, 2013
I second that!. Tom on Jan 18, 2013

Vendor prices. Matt Burnette on Jan 18, 2013

Thanks Matt, point well taken. :-). Brian Dahl on Jan 18, 2013
Matt have you noticed all the newer. Peter on Jan 18, 2013

Repro manufacturers. Skip Lackie on Jan 19, 2013

Gee, can we get him. on Jan 19, 2013

Check out this thread on SDC. on Jan 19, 2013

Sinclair M16 on ebay. MW on Jan 18, 2013

info. MW on Jan 18, 2013

4 wheel drive. Randy Wilkin on Jan 19, 2013

M Series Hood Ornament. on Jan 18, 2013

Wow! way to much!. on Jan 18, 2013

Situations vary..... Lee W. on Jan 19, 2013

True, especially if the truck has been restored.... on Jan 19, 2013

Wow. Robert on Jan 19, 2013

found on CL for sale trucks. peter on Jan 19, 2013

Thanks, Peter, here the link....... Lee W. on Jan 19, 2013
And the link for the '57, looks like a 3/4 ton...... Lee W. on Jan 19, 2013

And yet another one in Roseberg,Oregon ....... Lee W. on Jan 19, 2013

I saw that one toooooo but I thought it had already. Peter on Jan 19, 2013

CL for sale 1960 Studebaker Champ. peter on Jan 19, 2013

Here are some more CL specials for sale. peter on Jan 20, 2013

Starting in.... Mark57 on Jan 19, 2013

Finally Joined SDC.......... on Jan 19, 2013

Yep. on Jan 19, 2013
Depends..... Lee W. on Jan 19, 2013

$24 for a years full membership.... Dan Martin on Jan 19, 2013

Welcome to the club, Dan. Brian Dahl on Jan 19, 2013
joining. Chris on Jan 19, 2013
Next is to. on Jan 19, 2013

Don't think we have anything local.... on Jan 20, 2013

local chapter. on Jan 20, 2013

reach rod repair. Randy Belgum on Jan 19, 2013

Had no clue. on Jan 19, 2013
Thanks for sharing. Lee W. on Jan 19, 2013

tie rod. vern on Jan 19, 2013

reach rod. Randy Belgum on Jan 19, 2013

1955 E7 Rear Brakes. on Jan 19, 2013

Wheel Cylinders. Mark57 on Jan 19, 2013

Re: Wheel Cylinders. Doc on Jan 20, 2013
55 truck wheel cylinders. on Jan 20, 2013

Wheel Cylinders. Bo on Jan 20, 2013

Re: Wheel Cylinders. on Feb 1, 2013

Untitled. on Jan 19, 2013

Engine Question. on Jan 19, 2013

Firetruck Engine. on Jan 19, 2013

Engine. J.C.Absher on Jan 19, 2013
Thanks for pictures. IC Absher on Jan 28, 2013

A couple of ideas.... Gary Hearn on Jan 20, 2013
Studebaker Six Model 54 Engine. on Jan 20, 2013

'31 Fire truck engine. on Jan 20, 2013

Suburban Fire Protection Co.. on Jan 28, 2013

ATTN: STUDEBAKER TRUCK FARMERS-. Frank Drumheller on Jan 19, 2013

Thanks for all your hard work, Frank. Brian Dahl on Jan 20, 2013

Napa Auto Parts ??. on Jan 19, 2013

I would rate them. Keith Mifflin on Jan 19, 2013
I have bought parts at NAPA...... Lee W. on Jan 19, 2013

Just ordered.... on Jan 20, 2013

RE: just orded. Mark Thompson on Jan 20, 2013

I'm from a.... Frank Drumheller on Jan 19, 2013

There is such a guy. on Jan 19, 2013

well Dennis your lucky because in BC. Peter on Jan 20, 2013

your right on the money. on Jan 20, 2013

I've had good luck with NAPA. Brian Dahl on Jan 20, 2013
several months ago I went. on Jan 20, 2013

What's PPACA ?. Lee W. on Jan 20, 2013

Patient Protection & Affordable Care Act (ObamaCare). on Jan 20, 2013

Nope on Napa!. Jim King on Jan 20, 2013

Electric Fuel Pump. on Jan 19, 2013

John when we had our overheating problems and the. Peter on Jan 20, 2013

Peter, I am aware of the. on Jan 20, 2013

I did not want to use electric except for starting. Peter on Jan 20, 2013

Fuel Pump. Jeff Jones (the Tucson one) on Jan 20, 2013

So far I've seen. on Jan 20, 2013

6V Pump Reference. Jack Gasper on Jan 23, 2013

Good price, thanks!. on Jan 24, 2013

Fuel pump. Fred Stoeger on Jan 22, 2013

Re: Electric Fuel Pump. kurt on Jan 26, 2013

Why so many Stude Trucks in the West?. Glenn on Jan 19, 2013

Funny. Keith Mifflin on Jan 19, 2013
My guess is that climate plays a part...... Lee W. on Jan 19, 2013

But Oregon, Washington and BC have. Peter on Jan 20, 2013

Yes, no, maybe. on Jan 20, 2013

Rain and a stripper strips. Peter on Jan 20, 2013
Re: Yes, no, maybe. Jim Mackey on Jan 20, 2013

Rain. Dick Steinkamp on Jan 20, 2013

DIck in my eyes 10 months of. Peter on Jan 20, 2013
Dick S. in your area you do not live against a lot of mountains. Peter on Jan 26, 2013

Paging truckdog62563. Brian Dahl on Jan 20, 2013

Rickson. on Jan 20, 2013

Thank you Stu. Brian Dahl on Jan 20, 2013

I think Ralph McClain who is on this site from time to time had some custom wheels done.. George o on Jan 20, 2013

'47 M16-52 1 1/2 ton FS. on Jan 20, 2013

There ya go John, MPH would have a mate! :-). Brian Dahl on Jan 20, 2013

Yea, a big brother. on Jan 20, 2013

M16. vern on Jan 20, 2013

Cade's M16. Matt Burnette on Jan 20, 2013

M16. vern on Jan 20, 2013

Got the pics - nice M16. on Jan 20, 2013

M. vern on Jan 20, 2013
Boy that is one nice looking truck and does. Peter on Jan 23, 2013

Seems to be an.... Frank Drumheller on Jan 20, 2013
This truck is located in. Brian Dahl on Jan 20, 2013

Trout, yum!. on Jan 20, 2013

How to improve 2R11 ride?. Michael D on Jan 20, 2013

Re: How to improve 2R11 ride?. Matthew Burnette on Jan 20, 2013
I have a M15A and. on Jan 20, 2013
Don't change the truck, let the truck change you.. MW on Jan 21, 2013

Good advice MW. Brian Dahl on Jan 21, 2013
I would agree, at least. on Jan 21, 2013

Re: How to improve 2R11 ride?. studemaker on Jan 21, 2013

Awesome Stude!!!. on Jan 21, 2013

Diamond Plate. on Jan 21, 2013

ride. vern on Jan 21, 2013

Re: ride. Ted on Jan 21, 2013

Nice flag!. on Jan 21, 2013
Ted , I know you wouldn't pick on me. vern on Jan 21, 2013

Good idea Rick. Brian Dahl on Jan 21, 2013

Tell that to my little Champion engine!!!. on Jan 21, 2013

John with the weight of that wood bed you installed. Brian Dahl on Jan 21, 2013

Better ride. Dieseless Jim on Jan 21, 2013

Engine Frame Ground Strap. on Jan 20, 2013

Re: Engine Frame Ground Strap. Ted on Jan 20, 2013

The big reason for the. on Jan 20, 2013

Re: The big reason for the. Ed on Jan 21, 2013

Re: Engine Frame Ground Strap. Ed on Jan 21, 2013

I doubt that the engine. on Jan 21, 2013

ground strap. vern on Jan 21, 2013
Re: I doubt that the engine. Jack Gasper on Jan 22, 2013

Jack, the whole system. on Jan 23, 2013

Re: Engine Frame Ground Strap. Ted on Jan 21, 2013

ground strap. vern on Jan 21, 2013
Enngine frame ground strap. Ed on Jan 22, 2013

Did you ever have one of those days. Brian Dahl on Jan 20, 2013

Glad to hear that "Old Girl" got. on Jan 20, 2013

Thanks John. Brian Dahl on Jan 20, 2013

Truck on the road again. Brian Dahl on Jan 21, 2013
Know the feeling.. on Jan 21, 2013

$2,500 Used 1947 Studebaker Avanti for sale.. on Jan 21, 2013

VERY NICE looking Avanti. Brian Dahl on Jan 21, 2013
That is the most. on Jan 21, 2013
Re: $2,500 Used 1947 Studebaker Avanti for sale.. Paul on Jan 21, 2013

avanti. vern on Jan 21, 2013

Maybe not the seller's fault.. on Jan 21, 2013
From the look of the gravel (more pics). on Jan 21, 2013

Must be the. Randy Belgum on Jan 21, 2013

VIN # location on M5 pickup. Jim on Jan 21, 2013

Look on the drivers side. on Jan 21, 2013

VIN #. on Jan 22, 2013

I have seen on ebay. on Jan 22, 2013

That might just work. JimO on Jan 22, 2013
John, the body number.... Frank Drumheller on Jan 22, 2013

Frank, this I know, I just. on Jan 22, 2013

Re: VIN #. Skip Lackie on Jan 22, 2013

serial number. Jim O on Jan 22, 2013

OK, Jim O, now we're getting.... Frank Drumheller on Jan 22, 2013

Thanks!!!!!. Jim on Jan 23, 2013

Welcome to STT. Anonymous on Jan 21, 2013

Ooops, that's me. on Jan 21, 2013
Runs like a top. Jim on Jan 22, 2013

Serial Number location.... Frank Drumheller on Jan 21, 2013

12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

<< Prev Next >>

Copyright © 1999-2013 Network54. All rights reserved. Terms of Use Privacy Statement