After you bulk it you can attempt a few looks. You want it to look like am M-16 or a Sniper rifle?
You do know how to take it apart right? Well I would sugesst you change some of the springs around. Turn your trigger spring in to a really light trigger spring, Oil the clip slide like hell, turn your hammer spring in to something a little but more lighter, and attempt a longer barrel!
I am trying to attempt a new longer barrel for my 1077! Thats should have a litte bit mre accuracy and a higher fps.
Ive got a mill & lathe so making the bulk was a easy add on but Ive never had one apart. Listing the proper
way to take one apart would be a big help for everyone.
I also have a longer barrel I will try next.
Its actually verry simple. I dont know why a lot of people think its hard.
Take the screw under your stock out. Then take all the screws to your body uout. When all the screws are carefully take the right side of the gun off. The trigger will fly right out so prepare to catch it.
Just look at it for a while and get used to what is connected. But do not remove the valve from its receptir under the barrel. If that copper tubing comes out at anytime you can put it back in lubicating it with oil and giving a snug push.
Also look at a diagram! I will post one real soon.
Hi folks,
I have just joined from U.K.Greetings to you all.
Does anyone (Matthew) know which barrel I could put on my old 1077, would a Rabbitstopper U.K. (2260 U.S.A.?) fit this gun? or could you suggest any other type of barrel?
Thanks in anticipation
Gerry