Hey guys, my first post here and ive got a question for ya. I have already seen the Parts Schematic however I am still having trouble putting the darn thing back together. I opened it and have learned how it operates, but the brass flap at the top with the thin metal tube that holds it down, aswell as the random little spring are giving me some problems.

Like, I know that its supposed to catch the hammer and dissengage when the trigger is pulled back, and I understand the basic operation of the internals, but i dont know how to put that brass tab thing that catches the hammer back in. The way i understand it is that the spring is supposed to put tension on the tab so that when the hammer is pulled back from the trigger, it dissengages and in turn lets the hammer strike the firing pin, but i dont know how to put that together. Any help would be greatly appreciated. Thanks guys.

I put my gun back together 4 times before I got it right, the 2 arms of the spring do go betwen flapper and case to push it towards the hammer, the brass flapper must stick up enough for trigger lever to push it up and out of way. I did read it can be removed altogether, just there in case you pull trigger a little and then release, if my gun hadn't worked after 4 time, it was coming out.