I finally dulled my first blade
Today, I decided to mill 2" thick slabs to be used for seats and backs on my carved benches. The log I had was too large for the mill so I use the chainsaw mill to remove a really big slab from 2 adjacent sides. I ended up with a 29" x 22" x 5' cant which I milled as well as milling the slabs I chainsawed off.
Naomi asked, "Why's it called a cant." I said, "Because you can't roll it." I had to rotate this one with the tractor...
The Woodmizer gave me 14 x 2" slabs, 2 x 1.5" slabs and 1 x 1" slab; all 22" x 5'.