The hydro clutch on this truck (exactly like mine) is no fun at all freind.
DId you replace the Master or the slave on the trans?
It should be noted that both are likely bad once one fails...they are that stupid.
First you need to bench bleed the master cylinder - loop hose back to rez and pump pump pump.
Then open the bleed at the slave down at the trans (directly above 7/16" wrench OR 8mm bleed screw (depending on year))
Then let it gravity bleed a bit, then bleed just like brakes, you need an assistant.
It take WAY more time than you want to invest, always!
|
