AOD reverse gear issueOctober 29 2011 at 1:27 AM
|Jeff Mills (Login hybiepoo)|
from IP address 18.104.22.168
I'm building a 66 Mustang and bought an AOD to put in it.
I rebuilt the AOD using the Bad Shoe Productions DVD and a TCI rebuilt kit including the alto red clutches, new bands etc.
The car is still being built at the moment, so I can't drive it on the road yet.
The box will shift into drive no problem, although it is quite tight. Hopefully this will loosen up a little with more use, but I do remember setting it up on the tight side.
However, when I shift to reverse, nothing seems to happen. I THINK it might be partially working because I think the car might have moved backwards ever so slightly, but I'm not 100% sure of this. I don't want to rev the engine up too much in reverse in case it burns the clutches or band.
So what are the possible issues here?
1) It's going into reverse, but the piston is not engaging to drive the clutches.
2) Servo is not moving to engage a band
3) Check ball issue
Any help is appreciated.
- Fixed - Jeff on May 6, 2012, 2:21 AM