C4 IssueJune 26 2012 at 10:16 AM
|Donnie (Login dragtruck347)|
from IP address 188.8.131.52
I have a C4 with a reverse manual transbrakre valve body. The issue I am having is the transbrake will not hold the truck(jumps forward), and third gear is slipping. We did a line pressure test on it and the results were as follows(all readings taken Park 200 psi
Neutral 200 psi
1st 200 psi
2nd 200 psi
3rd 150 psi
In reverse if you bring the rpm up to about 2-2500 the pressure shoots to 400-450 psi, all other gears go no higher than 225 psi. Also with the transbrake engaged the pressure shoots up to 400-450 psi.
Any ideas on what the issue is?