Re: C4 shifting issuesJune 29 2012 at 12:19 AM
from IP address 188.8.131.52
Response to C4 shifting issues
That sounds like a low fluid level. Full runing level is even with the pan/case connection.
Run the stick down along the tube and see where it is.
Also. As it has been a 6 year process the breather tube / vent may be clogged with mud daubers.
If it is clogged the fluid will show high on the stick yet be very low.
The vacuum lines are't very big to start with, 3/16 is about it.
|This message has been edited by stuart40a from IP address 184.108.40.206 on Jun 29, 2012 9:35 AM|