WHOA!!!!!!!July 13 2012 at 11:20 AM
from IP address 220.127.116.11
Response to Re: down shift
Ok, lets get back to basics here.
The kd is not energized until the carb is opened to almost maximum.
Shut the vehicle off,have someone or a brick hold the gas pedal to the floor. Make sure the carb is opened to the max.
Push the kd rod as far down as possible. Now adjust the screw on the kd rod so there is about a .010 gap between the lever and rod.
The kd is not used on part throttle up or downshifts.
You may have to get into the valve body and see what may have been done to the valves.