D2AE-CA 2 bolt block
Stock rods - shot peened, magged, ARP
Stock crank
Clevite bearings
Crane 226/230 .528/.530 Powermax H-288-2 cam
TRW forged pistons, zero deck block (+/- .005), 9.33:1
Ported 2V heads, 4V valves installed, 74cc chambers.
Weiand Xcelerator, 5/8 open spacer, 1" 4 hole Moroso spacer
750VS Holley with a ProForm body, 72/77 jets
MSD distributor, 20 initial 38 in by 3000
Mallory VI ignition and coil
FlowKooler alum. water pump
12" and 16" electric fans on a 31 x 19 2 core al. radiator
C4, 3200 stall TCI Street Fighter
3.7 gear (going to 4.11 this winter)
26" BFG Drag Radials (275-50 x 15)
3020 lbs w/8 gallons of gas and the driver a good distance away. About 3250 race weight.

Best ET - (1/8 mile) 7.95 @ 86MPH, 1.78 60'
Typical ET - 8.10~8.20 (depending on temp) 83~84 MPH
Typical 60' - 1.82~1.86

Front
Moroso 242 in/lb front springs
Chassis Engineering adjustable shocks, set 90/10
Fiberglass bumper
No sway bar

Rear
South Side Machine lift bars
Summit race shocks rear - set 50/50
Poly leaf spring bushings
Stock leafs

No chassis stiffeners - with 4 doors, not yet needed.