351C 4V C4 '76 Maverick, tory

.030 over 2 bolt main arp studs filled to 1 1/2 " of deck
decked to 0
stock stroke crank with weights turned down balanced internaly with mallary weighs 2.5 lbs less than stock
eagle h-beam rods ross domed pistons comp. 13.6-1
bullet cam solid flat tappet over .600 lift was asked to not post duration
edm solid lifters
4v cc heads flow # already posted filled intake ports
a351 roush intake
holley 800 dp choke tower removed and blended
crane roller rockers
milodon windage tray
headers ? hooker super comp 1 7/8 x 3 1/2 not sure how much modifing it will that to make them fit the maverick I may end up building a pair
c-4 4000 stall converter
76 maverick 2500 lbs but needs cage still working on that
best time with 289 12.60 106 mph
not sure what you would call the traction bars they bolt to the spings in the front to preload the springs they seem to work alright had 1.70 60' times carrera shocks in rear
morso trick springs in front with 90/10 shocks
4.88 gears 30x9r-15 hoosiers

on edit, title change -blizz

I will post the dyno numbers when we get it finished it should have been done by now but I ran into some piston problems with the kb pistons that I was going to run.

Will post pictures when it all comes together hoping for high 10's