408C Scat steel crank, Scat H-beams, Probe 16cc pistons 30th over
2V ported AFD heads, and TFC low version manifold
Comp Cams solid roller, 262/262 @ 50 thou, 662/662 lift
Comp roller lifters
Yella Terra rollers, 7/16 stud mounted
Crow one piece 5/16 Chrome moly push rods 80 thou wall
Stainless one piece valves
Pistons at zero deck height
ARP head and main studs, and main stud girdle
8 litre sump
750DP Demon carby, 2" HVH spacer
Mallory 140 fuelpump/reg
Std Ford electronic distributor/Bosch coil
MSD 6AL
Pacemaker extractors with 1-3/4 primaries
Twin 3 inch system with X-pipe

C4 trans
5200 rpm 8 inch Dominator convertor
4.11 full spool
31 Spline Superior axels, rear disc brakes

[IMG][/IMG]

I have a set of the AFD 4V, that are going to the porters soon, for my next build. Have you ran your car at the track 1/4 mile, interested in your numbers...Tim

As posted on main forum.
11.04 at 123. Exhaust up and pump fuel, but needs some suspension mods,
as the std setup is causing traction probs