Re: 1986 spree

by (Login themopedwhiz)
Moped Gurus

Daniel

it's possible to clean the exhaust without cutting and welding..

check these 2 things first

A: make sure the oil pump is pumping oil thru the line and to the carb
you should be able to see the oil moving in the line..
if your not sure.. disconnect the line start the engine and see if oil is coming out of the hose..

do this only for a minute or 2 then hook it back up if it's working.

B: loosen the 2 nuts holding the exhaust at the cylinder ( DON NOT REMOVE THEM ) wiggle the exhaust to loosen it up

start the engine ( it will be louder )
and give it a test ride

if it runs accelerates faster and runs faster top speed then the exhaust needs to be cleaned..

if the performance doesn't change the exhaust is probably OK. and the problem is elsewhere

I don't know how long the scoot has been in your city/town but if it came from out of state it might be restricted to 25 mph

TheMopedWhiz

Ride Mopeds..SAve Gas..Have Fun

Posted on Apr 15, 2004, 8:52 PM
from IP address 151.144.164.11

Respond to this message

Goto Forum Home

Find more forums on Motorcycles

Create your own forum at Network54

Member of the Moped webring
	Next site Previous site Skip next site Next 5 sites Back 2 sites Random site