Crosman Airgun Forum

Not logged in | Login | Create Account Search    Post now! my original assertion was that we need thicker bigger bore comp tubes View Thread - robny on May 24, 2012, 2:10 PM   so whats the diameter of an FX pump? View Thread - Trevor on May 24, 2012, 12:17 PM its cut from his floor pump..hence dont lend - robny on May 24, 2012, 1:19 PM   Pumpers: Air path makes 2 90 degree turns View Thread - dan house on May 24, 2012, 10:11 AM Found a thread - Curt on May 24, 2012, 10:19 AM computational fluid dynamics - dan house on May 24, 2012, 10:29 AM Computational Fluid Dynamics - Curt on May 24, 2012, 1:15 PM only one way - Tom @ Buzzard Bluff on May 24, 2012, 10:22 AM crosman 700 is - robny on May 24, 2012, 10:56 AM makes me wonder if you - dan house on May 24, 2012, 10:43 AM Flow path slickening - Tom @ Buzzard Bluff on May 24, 2012, 11:45 AM Dan - Ron on May 24, 2012, 10:51 AM thats good to know too nt - dan house on May 24, 2012, 11:05 AM Sure enough... - Phil on May 24, 2012, 12:09 PM thats beyond incredible - robny on May 24, 2012, 1:18 PM   I'm trusting you guys..... View Thread - dan house on May 24, 2012, 9:17 AM How do we know - Ron on May 24, 2012, 9:33 AM my knees are bad - dan house on May 24, 2012, 10:00 AM dan, is this that meeting with the north koreans u mentioned earlier this week? - robny on May 24, 2012, 1:36 PM No thats next week - dan house on May 24, 2012, 1:50 PM and - robny on May 24, 2012, 1:58 PM   1377 View Thread - jeff on May 24, 2012, 8:37 AM Cock it first - dan house on May 24, 2012, 9:16 AM You pumped it up... - Ron on May 24, 2012, 9:24 AM 1377 - jeff on May 24, 2012, 11:02 AM no power - jefft on May 24, 2012, 11:19 AM Re: 1377 - Tom @ Buzzard Bluff on May 24, 2012, 11:56 AM Clarify... ? - Curt on May 24, 2012, 2:07 PM   The Benji 397 creation giveaway. Randy, please read. View Thread - Phil on May 23, 2012, 10:02 PM that's awesome - Trevor on May 23, 2012, 10:11 PM sweet!!!!!! nt - robny on May 24, 2012, 2:08 AM Wow--sounds great. - ray1377 on May 24, 2012, 7:29 AM Tahnk You Phil! - dan house on May 24, 2012, 9:15 AM That's very generous of you - Johnson, Jeffrey on May 24, 2012, 10:59 AM Very Nicely Done!! - Rich D. on May 24, 2012, 12:30 PM   To Crown Or Not To Crown - '66 Dan View Thread - Larry on May 23, 2012, 6:02 PM Recrown it. It will no doubt shoot a more .. - Rich D. on May 23, 2012, 6:08 PM Swedge first - Curt on May 23, 2012, 6:17 PM doenst that mush down the rifling? - dan house on May 24, 2012, 9:27 AM Yes, sorta, probly. - Curt on May 24, 2012, 10:24 AM Been there - Tom @ Buzzard Bluff on May 23, 2012, 7:22 PM Definelty Recrown - dan house on May 24, 2012, 9:19 AM   Pumper is like a pcp Minus bottle feed If you think about it and you use a hand pump its a View Thread - Bobby on May 23, 2012, 4:44 PM yep..same stuff..add a huge tank to a 760 valve - robny on May 23, 2012, 5:27 PM i did something like that - Trev on May 23, 2012, 6:57 PM THATS AMAZING! COOLNESS FACTOR IS - robny on May 23, 2012, 7:59 PM Neat-o' rama!! - Phil on May 23, 2012, 10:17 PM it was about 30 pumps between shots - Trevor on May 24, 2012, 12:26 AM thats way less efficent thn stock pumps to fpe ratio - robny on May 24, 2012, 2:06 AM i was surprised it actually kept working - Trevor on May 24, 2012, 8:01 AM lmao man.nt - robny on May 24, 2012, 2:04 AM   Telescoping Piston Concept View Thread - Larry on May 23, 2012, 2:07 PM Make sense ? - Curt on May 23, 2012, 2:34 PM Phil's been working with a multistage pump - dan house on May 23, 2012, 3:10 PM Yeah, that piston was a let down, sadly... - Phil on May 23, 2012, 3:45 PM Will it work? - Tom Anderson on May 23, 2012, 3:13 PM one sidenote - robny on May 23, 2012, 3:20 PM It may in fact work afterall. I always find the best solution... - Phil on May 23, 2012, 6:13 PM It does make sense. However, the surface area... - Phil on May 23, 2012, 3:37 PM ohh i was thinking of an antenna..where the diameter of the internalss - robny on May 23, 2012, 3:55 PM Well, I was thinking while away earlier... - Phil on May 23, 2012, 6:06 PM Re: It does make sense. However, the surface area... - Curt on May 23, 2012, 6:06 PM Multistage single pump ? - Ged. on May 24, 2012, 6:44 AM Ooops! - Ron on May 24, 2012, 7:40 AM   No free lunch? ok, how about a discount...... View Thread - dan house on May 23, 2012, 12:20 PM a pump that uses legs as opposed to arm for strength - robny on May 23, 2012, 12:40 PM Re: a pump that uses legs as opposed to arm for strength - airgunandy on May 23, 2012, 12:51 PM idea being to charge enough before setting off lol..kinda like a cane gun.nt - robny on May 23, 2012, 3:34 PM Re: No free lunch? ok, how about a discount...... - airgunandy on May 23, 2012, 12:47 PM Streak Freak did exactly that - dan house on May 23, 2012, 1:09 PM Re: No free lunch? ok, how about a discount...... - Tom Anderson on May 23, 2012, 1:20 PM Free lunch - Curt on May 23, 2012, 1:32 PM Longer arm? - Renato on May 23, 2012, 2:56 PM Butterfly.....Like the new Crosman pump. Handles on the sides? n/t - Rich D. on May 23, 2012, 6:12 PM Telescoping pump arm ! - Curt on May 23, 2012, 6:13 PM   guys off topic..i need an appropriate price to offer on a somewhat rare pistol View Thread - robny on May 23, 2012, 10:50 AM Be careful.... - Phil on May 23, 2012, 12:23 PM same as i was thinking..people weee asking 125 back in 2008 lmao - robny on May 23, 2012, 12:36 PM   Obvisouly I didnt make it clear, or finish my thought.....pumpers... View Thread - dan house on May 23, 2012, 9:55 AM Exactly! - Tom @ Buzzard Bluff on May 23, 2012, 10:10 AM so in other words your not looking for mrod power.. - robny on May 23, 2012, 11:09 AM if we can get it, sure - dan house on May 23, 2012, 11:53 AM Well, theres this one - Jon B. on May 23, 2012, 11:12 AM Re: Well, theres this one - robny on May 23, 2012, 11:24 AM   The summer of pumpers View Thread - airgunandy on May 23, 2012, 9:31 AM If you build that gun, it would be ground breaking - dan house on May 23, 2012, 10:26 AM Linkage... - Curt on May 23, 2012, 11:48 AM Good start - Tom @ Buzzard Bluff on May 23, 2012, 10:42 AM and make it a bulpup - Renato on May 23, 2012, 10:57 AM yep i personally totally agree ..lol.nt - robny on May 23, 2012, 11:08 AM That's my whole point - airgunandy on May 23, 2012, 12:57 PM   Let's start reviewing pumper hardware View Thread - Tom @ Buzzard Bluff on May 23, 2012, 9:09 AM Re: Let's start reviewing pumper hardware - airgunandy on May 23, 2012, 9:37 AM "I think 10 strokes to 680 to 700 fps would be ideal." - Tom @ Buzzard Bluff on May 23, 2012, 10:20 AM "More power out for less input is the dream I think" - airgunandy on May 23, 2012, 10:37 AM   Supercharged Pumper ? View Thread - Curt on May 23, 2012, 8:41 AM no no nonononno - dan house on May 23, 2012, 8:58 AM Self contained.... - Curt on May 23, 2012, 9:12 AM what about while u pump dan that action itself - robny on May 23, 2012, 9:12 AM Allow me to reiterate-- - Tom @ Buzzard Bluff on May 23, 2012, 9:23 AM +1 "simplicate and lightness" - dan house on May 23, 2012, 1:10 PM   molecule squeezer Attn: Rob View Thread - Ron on May 23, 2012, 7:40 AM this is a Must See diagram guys..heres my question, with such small volume in the - robny on May 23, 2012, 8:38 AM Don't worry about the extra air which escapes - Ron on May 23, 2012, 9:01 AM   i have a 2250xt that has been modified ....... how can i ... ? View Thread - paul self on May 23, 2012, 12:10 AM Re: i have a 2250xt that has been modified ....... how can i ... ? - Jack Witas on May 23, 2012, 10:26 AM 2250 - Anonymous on May 24, 2012, 8:59 AM   forget all this pumper talk ..here is the ultimate limiting factor! View Thread - robny on May 22, 2012, 9:21 PM Well, make a 9mm that fires... - Phil on May 22, 2012, 9:26 PM phil, hill pump 50 bux in case u need one. - robny on May 22, 2012, 10:13 PM lol..u get the point..10 pumps would bebfine..an ssp 9mm is a pipe dream .nt - robny on May 22, 2012, 10:14 PM hey cool..... now Im a limiting factor.....nt - dan house on May 22, 2012, 11:27 PM lol..id say you are a mitigating factor - robny on May 23, 2012, 8:25 AM We may have a winner !! - Curt on May 23, 2012, 8:09 AM exactly lmao - robny on May 23, 2012, 8:30 AM K.I.S.S. - airgunandy on May 23, 2012, 8:28 AM mr k would have approved of a bike chain and sprockets on my pumper lol.nt - robny on May 23, 2012, 8:31 AM Self deleted...not relevant nt - Ron on May 23, 2012, 9:35 AM   Discussion of MSP, SSP, etc. An idea worthy of discussion... View Thread - Phil on May 22, 2012, 9:04 PM would this be similar to tippmans c3 propane design minus the propane? - robny on May 22, 2012, 9:14 PM Oh, no. - Phil on May 22, 2012, 9:31 PM so wouldnt there be recoil? - robny on May 22, 2012, 10:17 PM I don't know or not... - Phil on May 22, 2012, 11:09 PM How does it creat heat if it maintains pressure? - CO222 on May 23, 2012, 12:00 AM Simple answer? I don't know. - Phil on May 23, 2012, 12:06 AM If I understand correctly.... - Curt on May 23, 2012, 7:59 AM   Phil's 39x SSP..... what if..... View Thread - dan house on May 22, 2012, 10:27 AM Hi Dan, Pump effort for a 1" dia. piston with an 11" stroke, - james perotti on May 22, 2012, 10:58 AM james, though, coulnt that pumping effrot be mitigated - dan house on May 22, 2012, 11:15 AM Yes, with an 11" stroke you will need a longer pump arm, - james perotti on May 22, 2012, 11:33 AM And I supposed there is a limit to how long yer pumparm can be - dan house on May 22, 2012, 1:21 PM Hmmm.... - Curt on May 22, 2012, 2:41 PM One time in conversation with Mr. Bowkett, I joked about his lever design... - Phil on May 22, 2012, 3:01 PM Here ya' go... - Phil on May 22, 2012, 10:58 AM Ok, help me with the math here.... - dan house on May 22, 2012, 11:14 AM I love this stuff !! - Curt on May 22, 2012, 12:20 PM My next gun project, a pumper,.... - Phil on May 22, 2012, 3:20 PM 14.7 is the atmosphere pressure that... - Phil on May 22, 2012, 12:58 PM Sweet Explanation! - dan house on May 22, 2012, 2:54 PM hehe yea, Ok thats exactly what I was after - dan house on May 22, 2012, 11:04 AM That would be about 250% of the stock volume, so assuming... - Steve in NC on May 22, 2012, 11:17 AM Calculating pumping effort will be the same - dan house on May 22, 2012, 2:57 PM Correct, However, some small finite things can reduce effort. - Phil on May 22, 2012, 3:09 PM Re: Calculating pumping effort will be the same - Curt on May 22, 2012, 3:20 PM back to my transmission idea for gear reduction at the pump arm pivot.lol.if whiscome - robny on May 22, 2012, 3:44 PM Actually - L D on May 22, 2012, 6:07 PM i was saying as it applies to pumpers..not springers..just hypothetical. - robny on May 22, 2012, 9:15 PM Transmission - Curt on May 23, 2012, 7:23 AM Calculating effort... - Curt on May 23, 2012, 7:30 AM Hey Dan... - airgunandy on May 22, 2012, 6:42 PM I looked hard at that for the 1377 buildoff - dan house on May 22, 2012, 11:39 PM 1377?? You lost me again, Dan. - airgunandy on May 23, 2012, 8:32 AM hehe I gotta work on my communi-mah-kashun skills - dan house on May 23, 2012, 10:48 AM   Question for Randy View Thread - dan house on May 22, 2012, 10:20 AM   Question about making new brass valves for the 1377 View Thread - James S on May 21, 2012, 6:40 PM go right ahead..no not really a mainstream aftermarket as itbstands. - robny on May 21, 2012, 7:14 PM just have a thick hide - eric on May 22, 2012, 9:41 AM Re: Question about making new brass valves for the 1377 - Anonymous on May 22, 2012, 2:51 PM Thick hide not me - James S on May 22, 2012, 4:01 PM Brass valves - Charles on May 23, 2012, 2:48 PM Good information NT - James S on May 23, 2012, 4:02 PM   Brainstorming on the rebirth of pumpers View Thread - dan house on May 21, 2012, 5:10 PM FX Independence Is The New Standard - Larry on May 21, 2012, 6:24 PM geometry of pump arm and length - robny on May 21, 2012, 7:11 PM But then... - Ron on May 22, 2012, 5:45 AM yes but a lot more time pumping perhaps..nt - robny on May 22, 2012, 7:31 AM Another prospective - Ron on May 22, 2012, 9:25 AM thats alsoba genius way of using the air not used in the pumping process..very cool. - robny on May 22, 2012, 3:29 PM Essentially, the idea is... - Phil on May 22, 2012, 8:23 PM Is there any clear line between a pcp with an on board pump and an AC pumper? - scot laughlin on May 21, 2012, 11:17 PM Depends on how you define them I guess - dan house on May 22, 2012, 9:09 AM Re: Is there any clear line between a pcp with an on board pump and an AC pumper? - Tom @ Buzzard Bluff on May 22, 2012, 10:18 AM TANSTAAFL? - dan house on May 22, 2012, 10:28 AM There ain't no such thing as a free lunch n/t - airgunandy on May 22, 2012, 11:27 AM Ah, gotcha - dan house on May 22, 2012, 1:19 PM And the answer is.... - Ron on May 22, 2012, 5:35 AM Pumper's Reborn - airgunandy on May 22, 2012, 6:25 AM Pumpers - Curt on May 22, 2012, 6:55 AM Curt...if your 1322 were set up with a piggyback reservoir of about one cubic inch - scot laughlin on May 22, 2012, 8:41 PM Piggyback... - Curt on May 23, 2012, 1:26 PM I think the closest thing right now is something Benjamin - VAF on May 22, 2012, 7:48 AM MULTI SHOT 392.... - Greg Lundy on May 22, 2012, 8:59 AM Greg...my AC benjamins have double the stock valve capacity...with no changes to the - scot laughlin on May 22, 2012, 8:52 PM Feeding the 392... - Greg Lundy on May 22, 2012, 10:52 PM There have been a few successful inline magazines for pneumatics and co2 guns - scot laughlin on May 22, 2012, 11:54 PM pumpers - airgunandy on May 22, 2012, 8:34 AM One Green member has been discussing the 1400/1377 hybrid with me - dan house on May 22, 2012, 9:13 AM yes..the 1377 1400 hybrid would be a terror in pistol form..would it be too long? - robny on May 22, 2012, 9:18 AM Too long? the P rod is offered as a pistol.... - dan house on May 22, 2012, 9:56 AM Ring, ring... - Phil on May 22, 2012, 9:28 AM Didnt wanna out ya Phil - dan house on May 22, 2012, 9:36 AM was - robny on May 22, 2012, 3:31 PM Very light. - Phil on May 22, 2012, 4:27 PM thanks for the info! - robny on May 22, 2012, 5:08 PM 13xx/1400 hybrid - Tom @ Buzzard Bluff on May 22, 2012, 9:39 AM Still need to design an eiaser way to run the pump on the gun - dan house on May 22, 2012, 10:01 AM Re: One Green member has been discussing the 1400/1377 hybrid with me - Anonymous on May 22, 2012, 3:22 PM Sundry concepts - Tom @ Buzzard Bluff on May 22, 2012, 9:28 AM QB78 - airgunandy on May 22, 2012, 9:48 AM Since I started this thread, I'll throw out my vision for discussion... - dan house on May 22, 2012, 9:35 AM Where to begin? - airgunandy on May 22, 2012, 10:22 AM Ok, there ya go. Step one - dan house on May 22, 2012, 11:22 AM Huh? - airgunandy on May 22, 2012, 11:40 AM No, your right on with the "shearing" motion - dan house on May 22, 2012, 1:13 PM Pumping Effort.... - Greg Lundy on May 22, 2012, 2:57 PM Need valve work - airgunandy on May 22, 2012, 6:03 PM Pumping Effort.... - Greg Lundy on May 22, 2012, 2:58 PM On the leverage question, do a search for "bullpump" - scot laughlin on May 23, 2012, 12:03 AM   Benjamin 132 & 137 values ? View Thread - Daysailer on May 21, 2012, 5:09 PM $20-$30 Each - Larry on May 21, 2012, 7:10 PM Re: Benjamin 132 & 137 values ? - David on May 22, 2012, 3:04 PM   Benjamin rear sight adjustment View Thread - Tom on May 21, 2012, 3:26 PM Add to the front sight. - Phil on May 21, 2012, 3:40 PM What Phil said. Building up the front sight by about 1/32" should suffice... - Steve in NC on May 21, 2012, 3:44 PM this is the way i do it. - johnny on May 21, 2012, 11:51 PM Flexing perhaps? - Phil on May 22, 2012, 12:01 AM i think it has more to do - johnny on May 22, 2012, 2:09 AM rear sight insights - airgunandy on May 22, 2012, 6:43 AM   Got a New 2240 View Thread - Johnson, Jeffrey on May 21, 2012, 11:03 AM Nice. I have a CS on the way, but it is taking longer than normal... - VAF on May 21, 2012, 11:26 AM RWS Pellets - Johnson, Jeffrey on May 21, 2012, 2:27 PM Usually SD's are a a pellet that you can count on to shoot - VAF on May 22, 2012, 7:33 AM I'll let you know - Johnson, Jeffrey on May 22, 2012, 4:08 PM What do I need to - Johnson, Jeffrey on May 21, 2012, 3:53 PM Couple Of Options - Larry on May 21, 2012, 7:12 PM I would opt for the steel breech, slightly more labor intensive - VAF on May 22, 2012, 7:54 AM Thanks Larry and Farmer - Johnson, Jeffrey on May 22, 2012, 4:19 PM Steel Breech Is Far Superior - Larry on May 22, 2012, 5:57 PM Nice looking guns - Johnson, Jeffrey on May 23, 2012, 7:33 AM Breech Is From BNM Custom Airguns - Larry on May 23, 2012, 10:09 AM Thank you for the tips - Johnson, Jeffrey on May 24, 2012, 11:04 AM   Made a hollow point making tool. Very neat! View Thread - Phil on May 20, 2012, 8:30 PM lmao...phil your mind is running 24 hrs aday..thats hilarious.. - robny on May 20, 2012, 9:59 PM Really. I try to be a nice guy. Suppose it can be slective at times! - Phil on May 20, 2012, 10:38 PM you - robny on May 21, 2012, 5:47 AM I like the simplicity. - Tim M. on May 21, 2012, 8:32 AM A hardware store visit is order... - Phil on May 21, 2012, 9:21 AM   Head to head shoot off View Thread - robert on May 20, 2012, 5:51 PM   Love that silencer View Thread - Charlie on May 20, 2012, 12:03 PM Those shrouds are nice. - Craig on May 20, 2012, 2:00 PM must be camo'd - dan house on May 21, 2012, 11:51 AM   valve options View Thread - justin on May 20, 2012, 2:32 AM flat top piston and valve will yeild performance gains at a good. price.nt - robny on May 20, 2012, 10:16 AM adjustable piston - justin on May 20, 2012, 10:23 AM here - eric on May 20, 2012, 2:41 PM Flat top piston - Curt on May 20, 2012, 4:08 PM Re: Flat top piston - dave on May 21, 2012, 11:26 AM Not condemning - Curt on May 22, 2012, 10:30 AM properly adjusted piston - justin on May 20, 2012, 6:23 PM Shim it and stuff it - airgunandy on May 21, 2012, 5:27 AM Shim it and stuff it ! - Curt on May 21, 2012, 7:33 AM hmmm - justin on May 21, 2012, 9:45 PM Flat Top Piston & Valve Is Easier To Use - Larry on May 22, 2012, 6:02 PM   Custom Crosman 2240 Air Pistol . 22 View Thread - Deano H on May 19, 2012, 9:11 AM nicest 2240 ive ever seen to be honest..nt - robny on May 19, 2012, 10:46 AM That is so sweet! - Craig on May 19, 2012, 2:54 PM Sweet - dan house on May 19, 2012, 9:54 PM Thanks For Comments! - Deano H on May 20, 2012, 2:10 AM You Need a P-Rod Grip Frame... - Larry on May 20, 2012, 7:34 AM P-Rod Grip Frame ? - Deano H on May 20, 2012, 7:47 AM Email Reply Sent - Larry on May 20, 2012, 4:33 PM Thanks Larry - Deano H on May 21, 2012, 4:18 AM Will the P rod 3 piece trigger setup, and the adjuster fit a stock frame? - dan house on May 21, 2012, 3:21 PM   Prod almost done View Thread - dan house on May 18, 2012, 10:44 AM Any pictures - Johnson, Jeffrey on May 19, 2012, 3:23 PM yea dan where are the f,n pics? lol..nt - robny on May 19, 2012, 6:37 PM Like you always say Dan.... - airgunandy on May 19, 2012, 7:27 PM It hasnt happened yet - dan house on May 19, 2012, 9:58 PM   Joshua Austin stock maker View Thread - paul on May 18, 2012, 5:46 AM He's Gone Dark Again - Larry on May 18, 2012, 6:16 AM Thanks - paul on May 18, 2012, 3:40 PM I believe he's a trustworthy guy - just needs some breathing room - Mike B on May 24, 2012, 4:18 AM   anyone make any green or tan ldcs? i wanna make one for my 417 what paint looks milspec? View Thread - robny on May 17, 2012, 12:51 PM Krylon camo colors - dan house on May 17, 2012, 2:10 PM olive drab is what i was trying to recall! - robny on May 17, 2012, 2:22 PM   Had the Prod long enough now to understand what I _dont_ like about it View Thread - dan house on May 17, 2012, 11:08 AM Trigger shoe - SteveR in SWFL on May 17, 2012, 1:43 PM The Gaska part showed up yesterday - dan house on May 17, 2012, 2:13 PM think about driling the shroud and slipping a length of bike innertube - scot laughlin on May 19, 2012, 11:08 AM Drill where? How many? - dan house on May 19, 2012, 9:50 PM I can't give you firm guidelines, I've never done a P-rod, but... - scot laughlin on May 20, 2012, 2:27 PM Partly agree... - robert on May 17, 2012, 8:09 PM I have the Swift shroud... - Jimby on May 19, 2012, 1:10 PM   My Gaska/MM Prod shroud extension arrived yesterday View Thread - dan house on May 17, 2012, 10:46 AM sounds well balanced out..is the extension quieter than the previous ssr attempts? - robny on May 17, 2012, 11:45 AM Better than anything I came up with - dan house on May 17, 2012, 3:01 PM thats really good news..i wonder if a felt wipe would make it - robny on May 17, 2012, 3:26 PM And your was worried nt - buster on May 17, 2012, 12:31 PM um, yea, uh, well maybe a llittle - dan house on May 17, 2012, 2:59 PM   Brainstorming thread on the rebirth--- View Thread - Tom @ Buzzard Bluff on May 17, 2012, 10:39 AM ah, maybe the time is now right for Air conservation.... - dan house on May 17, 2012, 11:29 AM Re: Brainstorming thread on the rebirth--- - airgunandy on May 18, 2012, 11:00 AM I read the thread, Tom, and unless I missed something, innovation... - Steve in NC on May 18, 2012, 11:53 AM Rebirth of the domestic pumper--- - Tom @ Buzzard Bluff on May 18, 2012, 12:17 PM Fair enough. nt - Steve in NC on May 18, 2012, 5:18 PM Sorry, tom..the registration hoops on that site aren't worth the time - scot laughlin on May 19, 2012, 11:27 AM Thanks for responding Scot - Tom @ Buzzard Bluff on May 19, 2012, 12:43 PM I've had to cut my shop time back so much in recent years, that in practical terms - scot laughlin on May 19, 2012, 4:08 PM Good stuff! - Tom @ Buzzard Bluff on May 20, 2012, 8:34 AM   SR-71 pilot Lt Col Dan House View Thread - dan house on May 17, 2012, 9:03 AM Wow. Out of 50 built, 20 crashed. I had no idea the Blackbird... - Steve in NC on May 17, 2012, 9:39 AM yea..these guys were all basically test pilots- sacrafical lambs lol.nt - robny on May 17, 2012, 10:16 AM Hypersonic craft made of unobtanium that leaks like sieve till it warms up - dan house on May 17, 2012, 10:21 AM Excuse my ignorance please, sorry Dan. Dave. NT - Dave on May 17, 2012, 11:06 AM hey no need to apologize - dan house on May 17, 2012, 11:40 AM Re: SR-71 pilot Lt Col Dan House - airgunandy on May 17, 2012, 9:49 AM I worked with a guy back home who helped build the blackbirds - Ian on May 17, 2012, 6:25 PM I hate to fly - dan house on May 18, 2012, 10:40 AM SR71 chase car - Craig on May 20, 2012, 2:09 PM Re: SR71 chase car - Larry on May 20, 2012, 8:04 PM "yea, kid, this car's only had one owner...." - dan house on May 21, 2012, 11:56 AM   Interesting Stock Idea From Luger View Thread - Johnson, Jeffrey on May 17, 2012, 7:46 AM Neat. But doing so changes the classification of the pistol to... - Phil on May 17, 2012, 8:18 AM The SBR "status" is for firearms - dan house on May 17, 2012, 8:46 AM By now that's likely covered by a C&R - Tiffany on May 18, 2012, 11:10 AM I was thinking about the design - Johnson, Jeffrey on May 19, 2012, 3:21 PM   sean in va can u share some pics of these 9mm breeches u have been making View Thread - robny on May 16, 2012, 10:00 PM 9mm? What platform - Johnson, Jeffrey on May 19, 2012, 3:29 PM sean has - robny on May 19, 2012, 6:45 PM   Question about recently aquired AS2250 .22 Co2 Bulk View Thread - Ed on May 16, 2012, 5:33 PM ... as far as I know, they don't make them anymore ... - fa on May 16, 2012, 5:58 PM The angled adaptor is from the old guns, - Ian on May 16, 2012, 9:22 PM   hey phil are the internals of benji pump same as the View Thread - robny on May 16, 2012, 5:08 PM Hey, Rob. The modern AirForce pumps are the same as the Benji. - Phil on May 16, 2012, 6:14 PM i may bug u for help but sounds like a plan!!! thx - robny on May 16, 2012, 7:26 PM Not a problem at all, Rob. - Phil on May 16, 2012, 10:27 PM dammit phil - robny on May 16, 2012, 10:39 PM You will be fine... - Phil on May 16, 2012, 10:52 PM ill let ya know how it goes.thx again - robny on May 17, 2012, 8:37 AM   prod dissassembly View Thread - Rick C on May 16, 2012, 9:21 AM tko22.com - chuck on May 16, 2012, 9:54 AM safety first, safety always - buster on May 16, 2012, 2:49 PM   Thanks View Thread - Dave on May 16, 2012, 7:00 AM Bird? service? - dan house on May 16, 2012, 1:45 PM colonel dan ..i think ur self jettison stunt is the reference? - robny on May 16, 2012, 5:12 PM That is it exactly NT Dave. - Dave on May 16, 2012, 9:41 PM oh man... hahahaha - dan house on May 17, 2012, 8:48 AM   A little help please. Have some questions. View Thread - Tim M. on May 15, 2012, 3:08 PM Answers... - Phil on May 15, 2012, 3:47 PM it is often said that springers are. the most difficult diy projects..nt - robny on May 15, 2012, 4:09 PM Many thanks for the quick replies - Tim M. on May 15, 2012, 5:18 PM Most certainly possible! - Phil on May 15, 2012, 8:35 PM Quest for the Ram - Tim M. on May 16, 2012, 8:05 AM Why will they not sell you a particular gas spring? - Ron on May 16, 2012, 11:42 AM I'm not sure why - Tim M. on May 16, 2012, 3:36 PM Re: A little help please. Have some questions. - JP MoneyShot on May 15, 2012, 4:14 PM Some ballpark numbers... - Steve in NC on May 15, 2012, 10:21 PM Good Info - Tim M. on May 16, 2012, 8:09 AM Well .25 cal. seems to be the max for springers, even big ones, like - james perotti on May 16, 2012, 7:43 AM   can someone tell me more about this gun? View Thread - Trevor on May 15, 2012, 10:42 AM someone added a huge tank to their valve and a different hammer+spring - robny on May 15, 2012, 12:39 PM on second look.its a pretty dam smart design..he may not dump the whole tank per shot - robny on May 15, 2012, 12:42 PM it wouldn't happen to be the front secton of a disco tube, would it? - Trevor on May 15, 2012, 1:02 PM wait are you trying to add valve volume or shot count with a bulk fill? - robny on May 15, 2012, 1:06 PM Re: wait are you trying to add valve volume or shot count with a bulk fill? - Trev on May 15, 2012, 1:21 PM well you definately need some sort of bulk system..10 shots is absurd. - robny on May 15, 2012, 2:52 PM im sure i could adjust it - Trev on May 15, 2012, 3:03 PM I love my Hi-Pac, check this out - AIRGUNSNIRVANA on May 15, 2012, 11:01 PM   Anyone know what happened to the Powermax/HiPac website? View Thread - SteveV on May 15, 2012, 9:04 AM Still there for me. - Jack Witas on May 15, 2012, 10:34 AM   Need help View Thread - 21grains on May 14, 2012, 9:56 PM "Airsource to paintball adapter" is what you need. Google that. N.T. - Phil on May 14, 2012, 11:13 PM Phil, U the Man - 21grains on May 15, 2012, 4:08 AM   Refinishing Tips For Blue Streak Barrel & Breech View Thread - Larry on May 14, 2012, 8:08 PM Re: Refinishing Tips For Blue Streak Barrel & Breech - airgunandy on May 15, 2012, 5:27 AM The good stuff - Rob on May 15, 2012, 7:14 PM Lethal Stuff! - Larry on May 15, 2012, 9:05 PM   All applications have been updated and approved.... View Thread - Randy Mitchell on May 14, 2012, 7:11 PM      1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40    Next >>

Visitors in this forum in the last 10 minutes: 21 Visitors
Arkmaker, curt44319, robnewyork, vertec96, 17 guests