Crosman Airgun Forum (new): Ideal transfer port dia. for.22 disco?

logo by smgunner

Return to Index

Ideal transfer port dia. for.22 disco? July 2 2009 at 11:36 AM		(Login doclov) Crosman Forum Member from IP address 98.110.119.6


What would the tuners out there feel is the ideal transfer port dia.for a .22 Disco in terms of shot count, velocity, noise control? Thanks and regards, John in N. J.

Respond to this message

Responses

If you plan to tune for moderate power (i.e., ~14fpe in .177 - ~16fpe in .22)... - Steve in NC on Jul 2, 2009, 1:03 PM

Give MAC1 a call... - Tony on Jul 2, 2009, 1:13 PM

Looking for about 25-28 fpe. Thanks, John in N. J. - John in N. J. on Jul 2, 2009, 3:49 PM

Interesting. Has anyone pushed a Disco to 28fpe without violating its MWP limit? - Steve in NC on Jul 2, 2009, 4:33 PM

You mean Recommended Fill Pressure with allowance for 2100psi using the FACTORY - Tony on Jul 3, 2009, 10:30 AM

Nope. I mean the factory spec'd Maximum Working Pressure. If you don't know... - Steve in NC on Jul 3, 2009, 4:50 PM

Why don't you tell it to Crosman? - Doug Owen on Jul 4, 2009, 8:58 AM

Is that how it works in your world, Doug? You tell the manufacturer what the MWP... - Steve in NC on Jul 4, 2009, 9:58 AM

No thanks, you're the expert.... - Doug Owen on Jul 4, 2009, 12:48 PM

as a matter of fact - darren on Jul 6, 2009, 12:22 PM

Cool. Please post a shot string. nt - Steve in NC on Jul 7, 2009, 8:56 AM

Definitely contact MAC1 who actually runs a full time airgun business - Tony on Jul 2, 2009, 4:47 PM

Tony is correct, get a hold of Mac1 - Protos on Jul 2, 2009, 8:46 PM

27 ft / lb - boo on Jul 3, 2009, 10:01 AM

MAC ! tuned .22....2000 psi fill... - Rich Woods on Jul 4, 2009, 8:05 AM

power range - boo on Jul 4, 2009, 8:50 AM

Agree... - Rich Woods on Jul 4, 2009, 9:37 AM

Factory Discovery performance - Doug Owen on Jul 4, 2009, 2:21 PM

Crosman Corporation 1-800-724-7486