out side of a bad lead in or crown, are almost always due to the device hanging on the end of the barrel. If any one suspects they should have better accuracy the first thing I would do is remove the junk from the front of the barrel. Some are there for weight, some for noise, some to strip air from behind the pellet and some are there to look kool. and not all help hitting the target.
probably the best design I have seen is what is on tanks, a t-brake, also on the usft from mac1. they do not have to look kool to work.
john
This message has been edited by jct842 from IP address 216.134.239.168 on Dec 18, 2010 2:05 AM
|
|
