photo toplogo1_zps46807118.jpg

 photo americlps_zpsavfgvdau.jpg

Dag Evert's "American Classic"

As mentioned on the forum, heres a picture I took some time back, with natural winter daylight.
A 2100, and a 1377, both guns have been recrowned, and had their trigger parts shimmed for play,
contact surfaces stoned, and trigger springs somewhat reduced within safe limits.
The 2100 has had its barrel shimmed with tape to remove play.
Both guns give great accuracy for the money if they are given good pellets!
The combination of pellets and guns in the picture represents something close to my boyhood dreams:-)
-- Dag Evert

 Return to Index  

700 fps is going to require valve work I think

January 22 2011 at 4:30 PM
v30  (Login v30)
Crosman Forum Member
from IP address 142.163.149.242


Response to 1377 flat top setup questions

With the flat top valve and piston and lighter valve spring I was able to get about 630 fps on 14 pumps.....700 fps will probably require some kind of valve work like Phil suggested.

 
 Respond to this message   

Crosman Corporation 1-800-724-7486
This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are soley the opinion of the individual member