The (new) Crosman Forum, your first and last stop for all things Crosman

 photo 63f5b325-0274-4312-9dbd-2effde5b3715_zps0x27orls.jpg

Alan Alford's build

2250b Tube for later move to bulk CO2.
12" .22 Caliber Barrel from Doomsday Backpacker
Brian & Assoc. Alluminum Breech with 2 barrel screws
Original site rear
Pin site on Custom Mt. Airguns Muzzle Break
2x1 Centerpoint Scope with UTG dovetail adapters
Mountain Airguns Custom Bolt and Handle
Mountain Airguns Custom Power Adapter and spring guide
B&A Boss Valve for extra Power

Built mainly for fun and to shoot at local Field Trial Pistol Match.

It currently it shoots a 14.3 Crosman Hunting Pellet at about 530 fps in a 72 degree room for 8.92 FPE.



 Return to Index  

Awesome TT Jim!

March 28 2011 at 7:35 PM

David Rogers  (Login Yellowdman)
Crosman Forum Member
from IP address 184.96.119.150


Response to Doesn't look like much has changed...

I was curious what pressure you were running when I read an earlier post you did. I was getting 31 fpe with the 25.4gr pellets and the senior bigboy 28.6gr pellets and I had a leak at my TP seal. I took everything apart and made a new seal and now I'm getting 33.3 fpe on 1600psi and I'm very tempted to switch to 1800psi but I might wait a little since I'm building a shroud for mine which I'll post some pics next week. I'm stoked you passed my numbers but I'm a little jealous too! wink.gif SWEET!

 
 Respond to this message   
Responses

Crosman Corporation 1-800-724-7486
This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are soley the opinion of the individual member