The (new) Crosman Forum, your first and last stop for all things Crosman

CG01.jpg CG01.jpg

Carl Quick's LiteWieght 2240

So for about the last 24 months, I've had her on a serious diet. Now I am happy to report that she lost nearly 13 ounces and is feeling so much better. And let me say one thing, when I pick her up with one hand now she is light as a feather. Well, almost a feather.

Things I have done so far:

OEM main tube was lightened by me.
Barrel is OEM and trimmed down by me.
Main tube plug is made of Delrin by me.
Gas cap is aluminum, comes from HPA and bored out by me.
Hammer is made from Delrin by me with a modified 1701P striker.
Valve is an aluminum Disco rear end with a brass Pro-Top by Anthony.
Trigger grip frame is aluminum by Bluefork Design and then hogged out by Gregg.
Front barrel band is aluminum, made by Anthony, drilled by Rich and milled by me.

Quickster47



 Return to Index  

FPS question on stock Discovery

March 31 2011 at 10:14 PM

Ronald Woodruff  (Login coaldust)
Crosman Forum Member
from IP address 209.30.58.192

I finally got my Chrony set up and checked the vel on my Discovery.
It is bone stock except for a mellon adjuster. My question is, what should I be getting
for top fps with a 2000psi air fill?? With my adjuster 1/4 turn from spring bind,I am getting 650, 630fps.
I would have thought it would be better. Any suggestions??

QB78 Deluxe Rich from Mich tuned
crosman 2400KT custom shop with added Discovery air tube
QB79 Rich from Mich tuned
QB2078 mike melick tuned
.22 and.25cal Marauders
Life member NRA and Texas State Rifle Assoc.
.308 corsair
Crosman 2260

 
 Respond to this message   
Responses

Crosman Corporation 1-800-724-7486

This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are solely the opinion of the individual member