logo by smgunner

Dean's HiPac 2240

Tactical Trijicon ACOG TA01 Style 4x32 Cross Sight Rifle Scope + Kill Flash
TROBB Solid Aluminium Dovetail Power Block with Gmac hollow probe and G-mac Bolt
Gmac Brass Power Adjuster Spring And Guide/Drilled Out Standard Valve For more air space
Hammer Mods//Gmac 30% Lighter valve Spring/Gmac Brass Safety Catch//Transfer port drilled out
Full Gmac Trigger kit/Gmac barrel cut to 9inch/Weihrauch Silencer/Custom Home Made Grips/
New TRACER LEDRAY GL2 LAMP 90m Range Beam//HI-Pac

 Return to Index  

If it uses the same style valve...

September 1 2011 at 10:16 AM
Phil  (Login Duane30)
Crosman Forum Member
from IP address 69.136.1.121


Response to very cool idea

..., o-ring in the front of the valve (most certain it does), then the factory valve will be fine. The inlet check valve will need to be removed, but other than that all is a go. Of course a new tube is required for PCP application.

When it comes out, I'll examine it more closely...

"Well, I thought it was a rabbit but it turned out to be Bear Grylls in a rabbit hide."

[linked image]

 
 Respond to this message   

Crosman Corporation 1-800-724-7486