The (new) Crosman Forum, your first and last stop for all things Crosman

 photo 63f5b325-0274-4312-9dbd-2effde5b3715_zps0x27orls.jpg

Alan Alford's build

2250b Tube for later move to bulk CO2.
12" .22 Caliber Barrel from Doomsday Backpacker
Brian & Assoc. Alluminum Breech with 2 barrel screws
Original site rear
Pin site on Custom Mt. Airguns Muzzle Break
2x1 Centerpoint Scope with UTG dovetail adapters
Mountain Airguns Custom Bolt and Handle
Mountain Airguns Custom Power Adapter and spring guide
B&A Boss Valve for extra Power

Built mainly for fun and to shoot at local Field Trial Pistol Match.

It currently it shoots a 14.3 Crosman Hunting Pellet at about 530 fps in a 72 degree room for 8.92 FPE.



 Return to Index  

wow , there is some reallly good potential

October 5 2011 at 8:21 AM

robny  (Login robnewyork)
Crosman Forum Member
from IP address 108.21.102.194


Response to Re: ok andy , mine has a rifled barrel

i know if dan can get his trigger like the one on his mrod , he will have a super accurate gun givenn his current configuration.(cant speak on that lol) Im hoping for dimes at 20yrds, thats my goal , although the stock rifling is very shallow , almost like the old straw barrels shallow.. so soft or very large pellets will be key...need to get some minor machining done , then my sidepumper will be back together , then ill test for accuracy.My real goal in the buildoff, to have a gun i can shoot relaibly and quietly for yrs after the buildoff is over, so no stone will go unturned.I dont want it to be like the 201 challenge where the gun was junk right after the build never to be shot again, thats a big rreason why more people joined this time , because the gun wont be garbage afterwards.

 
 Respond to this message   
Responses

Crosman Corporation 1-800-724-7486
This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are soley the opinion of the individual member