The (new) Crosman Forum, your first and last stop for all things Crosman

 photo americlps_zpsavfgvdau.jpg

Dag Evert's "American Classic"

As mentioned on the forum, heres a picture I took some time back, with natural winter daylight. A 2100, and a 1377, both guns have been recrowned, and had their trigger parts shimmed for play, contact surfaces stoned, and trigger springs somewhat reduced within safe limits. The 2100 has had its barrel shimmed with tape to remove play.
Both guns give great accuracy for the money if they are given good pellets!
The combination of pellets and guns in the picture represents something close to my boyhood dreams:-)


-- Dag Evert

 Return to Index  

Except....

October 31 2011 at 12:55 PM

dan house  (Login dan_house)
Crosman Forum Member
from IP address 153.90.162.47


Response to almost easier to change the trigger shape. making a shorter throw!?

the sear holds onto the hammer strong enough to pull the hammer down. when it bottoms out on the pump tube, the sear pulls free of the hammer.

 

its the hammer movememnt thats the issue. Otherwise, yes, trigger mods would clear that up....



dr_subsonic's pneumatic research lab
[linked image]
the Lunatic Fringe of American Airgunning
Southwest Montana's headquarters for Airgunning Supremacy
Proud Sponsor of team_subsonic

 
 Respond to this message   
Responses

  • I SEE - robny on Oct 31, 2011, 12:59 PM
  •  
  • Re: Except.... - airgunandy on Oct 31, 2011, 1:53 PM
  •  

Crosman Corporation 1-800-724-7486
This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are soley the opinion of the individual member