The (new) Crosman Forum, your first and last stop for all things Crosman

 photo 63f5b325-0274-4312-9dbd-2effde5b3715_zps0x27orls.jpg

Alan Alford's build

2250b Tube for later move to bulk CO2.
12" .22 Caliber Barrel from Doomsday Backpacker
Brian & Assoc. Alluminum Breech with 2 barrel screws
Original site rear
Pin site on Custom Mt. Airguns Muzzle Break
2x1 Centerpoint Scope with UTG dovetail adapters
Mountain Airguns Custom Bolt and Handle
Mountain Airguns Custom Power Adapter and spring guide
B&A Boss Valve for extra Power

Built mainly for fun and to shoot at local Field Trial Pistol Match.

It currently it shoots a 14.3 Crosman Hunting Pellet at about 530 fps in a 72 degree room for 8.92 FPE.



 Return to Index  

Strange how things evolve.

February 12 2012 at 4:23 PM
Brad  (Login 412mkm)
Crosman Forum Member
from IP address 24.253.72.162

Started as a way to mount a heavy barrel on a Discovery. Then between the weight of the barrel and all that aluminum, was just too much. That explains all the holes. It sat around for a few months and I decided to put it on a 2260. That worked out so well I thought it should have its own custom stock. Ended up alot different than it started. Glad I stuck with it.
[IMG][linked image][/IMG]
[IMG][linked image][/IMG]

 
 Respond to this message   
Responses

Crosman Corporation 1-800-724-7486
This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are soley the opinion of the individual member