Dag Evert's "American Classic"
As mentioned on the forum, heres a picture I took some time back, with natural winter daylight.
A 2100, and a 1377, both guns have been recrowned, and had their trigger parts shimmed for play,
contact surfaces stoned, and trigger springs somewhat reduced within safe limits.
The 2100 has had its barrel shimmed with tape to remove play.
Both guns give great accuracy for the money if they are given good pellets!
The combination of pellets and guns in the picture represents something close to my boyhood dreams:-)
-- Dag Evert
Re: Custom shop 2400 carbine showed up today.....February 14 2012 at 2:24 AM
Lou Hauburger (Login degriz)
Crosman Forum Member
from IP address 126.96.36.199
Response to Custom shop 2400 carbine showed up today.....
Agree with everything said, it's all easily fixable but why should you have to. I am sure Crosman will take care of it. Ask them to send you a Postage paid box.
If you are going to do mods, or install a new valve you still want the original valve to operate correctly for your next project. Or if you have the necessary tools and the inclination you may want to mod the valve yourself.
Once you tear into one of these you will see just how simple they are to work on.
Crosman Corporation 1-800-724-7486
This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are soley the opinion of the individual member