The (new) Crosman Forum, your first and last stop for all things Crosman

 photo 63f5b325-0274-4312-9dbd-2effde5b3715_zps0x27orls.jpg

Alan Alford's build

2250b Tube for later move to bulk CO2.
12" .22 Caliber Barrel from Doomsday Backpacker
Brian & Assoc. Alluminum Breech with 2 barrel screws
Original site rear
Pin site on Custom Mt. Airguns Muzzle Break
2x1 Centerpoint Scope with UTG dovetail adapters
Mountain Airguns Custom Bolt and Handle
Mountain Airguns Custom Power Adapter and spring guide
B&A Boss Valve for extra Power

Built mainly for fun and to shoot at local Field Trial Pistol Match.

It currently it shoots a 14.3 Crosman Hunting Pellet at about 530 fps in a 72 degree room for 8.92 FPE.



 Return to Index  

One more thing...

March 4 2012 at 1:21 PM
peter  (Login petedrans)
Crosman Forum Member
from IP address 76.179.3.220


Response to yep, i have the same tubing at my hardware, thanks for the excellent idea!!!!!!!

forgot to mention the lock nut. you'll need a lock nut threaded on the rod too. They sell "jam nuts" they are thinner than a standard nut. YOu probably knew this, but it is key if you're going to try this method. jam nut will hold the stock in the right place and snug everything up. let us know if you try it!

 
 Respond to this message   
Responses

Crosman Corporation 1-800-724-7486
This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are soley the opinion of the individual member