photo toplogo1_zps46807118.jpg

 photo americlps_zpsavfgvdau.jpg

Dag Evert's "American Classic"

As mentioned on the forum, heres a picture I took some time back, with natural winter daylight.
A 2100, and a 1377, both guns have been recrowned, and had their trigger parts shimmed for play,
contact surfaces stoned, and trigger springs somewhat reduced within safe limits.
The 2100 has had its barrel shimmed with tape to remove play.
Both guns give great accuracy for the money if they are given good pellets!
The combination of pellets and guns in the picture represents something close to my boyhood dreams:-)
-- Dag Evert

 Return to Index  

BTW speaking of O-rings, hey phil...

March 26 2012 at 10:55 AM

Trev  (Login Dnadnnoid)
Crosman Forum Member
from IP address 98.232.166.154

if youre reading this, i got around to trying out the o-ring on the 392 transfer port. i did some testing on it and everything. i ended up gaining about 25 fps. i think i could get more if i had done a better job fitting the oring. it's a bit loose. i need more practice to work up some courage to do it to my brass valves

[IMG][linked image][/IMG]

3rd o-ring transfer port o-ring oring




dnadnnoid




    
This message has been edited by Dnadnnoid from IP address 71.193.179.25 on Jan 1, 2015 2:04 PM


 
 Respond to this message   
Responses

Crosman Corporation 1-800-724-7486

This forum is not affiliated with the Crosman Corporation in any way

Information presented in this forum is intended for informational purposes only; use at your own risk

Posts made to this forum are soley the opinion of the individual member