photo toplogo1_zps46807118.jpg

 photo americlps_zpsavfgvdau.jpg

Dag Evert's "American Classic"

As mentioned on the forum, heres a picture I took some time back, with natural winter daylight.
A 2100, and a 1377, both guns have been recrowned, and had their trigger parts shimmed for play,
contact surfaces stoned, and trigger springs somewhat reduced within safe limits.
The 2100 has had its barrel shimmed with tape to remove play.
Both guns give great accuracy for the money if they are given good pellets!
The combination of pellets and guns in the picture represents something close to my boyhood dreams:-)
-- Dag Evert

 Return to Index  

Jeeze, Dan. You almost make it sound like CO222 and I are selling these things.

March 27 2012 at 3:48 PM

Steve in NC  (Login pneuguy)
Troll, Banned User or Assorted Delinquent
from IP address 74.162.154.212


Response to Or ing check valve.... more Q's

My suggestion for the split lockwasher is to put it between the screw head and the surrounding metal, with the O-ring around the washer - thusly - so that the screw can be adjusted for correct O-ring preload. To do it blind (e.g., down inside a valve body), you could probably simply count turns of the screw.

[linked image]

Steve

 
 Respond to this message   
Responses

Crosman Corporation 1-800-724-7486
This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are soley the opinion of the individual member