photo toplogo1_zps46807118.jpg

 photo americlps_zpsavfgvdau.jpg

Dag Evert's "American Classic"

As mentioned on the forum, heres a picture I took some time back, with natural winter daylight.
A 2100, and a 1377, both guns have been recrowned, and had their trigger parts shimmed for play,
contact surfaces stoned, and trigger springs somewhat reduced within safe limits.
The 2100 has had its barrel shimmed with tape to remove play.
Both guns give great accuracy for the money if they are given good pellets!
The combination of pellets and guns in the picture represents something close to my boyhood dreams:-)
-- Dag Evert

 Return to Index  

P Rod SSR..... 4 possible paths

May 4 2012 at 10:30 AM

dan house  (Login dan_house)
Crosman Forum Member
from IP address 153.90.162.47

Soooo Ive narrowed it down to these 4 options:

1) continue experimenting with the factory parts and my own additions or others internals

2) Get the Marmot Militia's Prod shroud extension

3) get the 1/2 by 20(28) shroud adapter that will let me use my _legal_ 22LR suppressor

4) take the shroud off completely and use a TKO brake I have

Downsides? Paths 2 -4 will add add 3 - 7 inches in OAL to the little gun. PAth 3 means the picle has to be on for zeroing and accuracy testing. Putting it on and removing it may make the zero move.

 

Still thinking a hybrid approach will yeild the "best" results. Decouple the muzzel from the stripper, some dead space and then a baffle stack of some sort



dr_subsonic's pneumatic research lab
[linked image]
the Lunatic Fringe of American Airgunning
Southwest Montana's headquarters for Airgunning Supremacy
Proud Sponsor of team_subsonic

 
 Respond to this message   
Responses

Crosman Corporation 1-800-724-7486
This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are soley the opinion of the individual member