Dag Evert's "American Classic"
As mentioned on the forum, heres a picture I took some time back, with natural winter daylight.
A 2100, and a 1377, both guns have been recrowned, and had their trigger parts shimmed for play,
contact surfaces stoned, and trigger springs somewhat reduced within safe limits.
The 2100 has had its barrel shimmed with tape to remove play.
Both guns give great accuracy for the money if they are given good pellets!
The combination of pellets and guns in the picture represents something close to my boyhood dreams:-)
-- Dag Evert
Hmm I wonder if it'd be easier to....May 6 2012 at 7:34 PM
Derek (Login Stealth_Warrior)
Crosman Forum Member
from IP address 220.127.116.11
Response to i just had this problem
Put the O-ring in the barrel with a groove like the Marauder .25 barrels or to incorpate the seal with the bolt. Thanks for the chamfer tip. We do the same thing at school for fire arm barrels so the edge won't make a burr on the case or prevent extraction.
Crosman Corporation 1-800-724-7486
This forum is not affiliated with the Crosman Corporation in any way// Information presented in this forum is intended for informational purposes only; use at your own risk//Posts made to this forum are soley the opinion of the individual member